Riello natural gas burner RS 68/M BLU (20207611)

Riello natural gas burner RS 68/M BLU (20207611) RS 68/M BLU is an integral civil gas burner that adopts proportional combustion control method, suitable for steam furnaces, water hot furnaces and other equipment, and has the characteristics of low nitrogen emissions. Fuel: Natural gas. Catalog: about 600,000 calories. Air supply pressure: 5kpa. Fuel consumption: about 70m³/h. Protection level: IP40. Functional features: accurate combustion adjustment, low nitrogen emissions and environmentally friendly, safe and reliable operation, easy installation and maintenance, and intelligent fault diagnosis.

Riello gas Burner RS70-M （20195818）

Riello gas Burner RS70-M （20195818） The RS70-M is a forced ventilation gas burner suitable for hot water or superheated water boilers, hot air generators, steam boilers and thermal oil furnaces, etc. It adopts a smooth two-stage flame adjustment method and is equipped with a microelectronic control box that can diagnose the operating status and fault causes. The performance of its fan and burner head has been optimized, making it widely applicable and ensuring high combustion efficiency at various operating points. It has a compact size, facilitating installation and maintenance. Heat output: 150 - 930kW, approximately 130 - 800Mcal/h. Adjustment ratio: The adjustment ratio can reach 6:1 at maximum output. Servo motor: Model SQN90, with a running time of 24 seconds. Features: Combustion adjustment: The default operation mode is smooth two-stage flame, and it can also achieve proportional adjustment mode after installing a PID ratio controller and corresponding probes, allowing flexible adjustment of heat output according to actual needs to meet different load requirements. High efficiency and energy saving: By optimizing the performance of the fan and burner head, it ensures high combustion efficiency at all operating points, reducing fuel consumption and operating costs. Safe and reliable: The design complies with multiple European technical standards such as EN676 and EN12100, and meets the requirements of the MD 2006/42/EC Machinery Directive, LVD 2006/95/EC Low Voltage Directive, and EMC 2004/108/EC Electromagnetic Compatibility Directive. It has multiple safety protection functions and operates stably and reliably. Fault diagnosis: Equipped with a microelectronic control box, it can provide diagnosis of the burner's operating status and fault causes, facilitating quick troubleshooting and problem-solving for maintenance personnel. Easy installation: With a compact size and a variety of optional accessories, it offers flexible installation and is easy to maintain, meeting the needs of different installation scenarios. Additionally, the burner has a protection rating of IP40, making it suitable for a range of usage environments.

Riello gas Burner RS100-M （3789710）

Riello gas Burner RS100-M （3789710） RS100-M ：It is a forced ventilation gas burner, suitable for steam boilers, hot water boilers, thermal oil boilers and other equipment. The burner adjustment method is to smoothly transition two-stage fire, and proportional adjustment can also be achieved by installing a PID regulator and an auxiliary probe. It is equipped with a microelectronic control box that diagnoses operating status and causes of failure. The fan uses forward-tilt blades, sound insulation materials are installed at the air inlet, and the performance of the combustion head has been optimized, which not only has low noise, but also increases the scope of application. At the same time, the appearance is small, which is convenient for use and maintenance. Power: The smaller power output is 232kW, and the second-stage fire power output is 1163kW. Gas flow: The smaller gas flow is 23m³/h, and the second-stage fire gas flow is 116m³/h. Motor rated power: 1.8kW. Power supply: 3-phase 380V, 50Hz. Functional features: flexible combustion adjustment, efficient and energy-saving, safe and reliable operation, convenient fault diagnosis, convenient installation and maintenance, and low noise.

Riello gas burner RS310-M MZ +Gas Valve group CB50/1(3970146)

The RS310-M MZ burner has a large output range and is suitable for heating boilers, thermal oil boilers, steam generators and other equipment. It adopts an integral design, compact structure and small size, which is convenient for installation and maintenance. It can be opened on the left or right side to facilitate inspection of internal components. Power: The power range is approximately 600-3900kW. Fuel: Suitable for natural gas, including G20, G21, G22, G23, G25 and other types. Gas pressure: At maximum output, the G20 natural gas pressure is 33.2mbar and the G25 natural gas pressure is 49.5mbar. Power supply: The main power supply is 3N~400V±10%, 50Hz. Fan motor: power is about 7.5kW, speed is 2900rpm, voltage is 230/400V, current is 23.9/13.8A. Ignition transformer: voltage 230V - 1x8kV, current 1A - 20mA. Protection level: IP54. Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and convenient installation and maintenance.

Riello burner RLS 120-M MX

Riello burner RLS 120-M MX RLS 120-M MX：It is a low-nitrogen-regulated oil and gas dual-purpose burner, suitable for medium and low temperature hot water boilers, hot air boilers, steam boilers and thermal oil boilers and other equipment. The burner is uniquely designed, small in size, easy to use and maintain, and is equipped with a variety of accessories for high working flexibility. The noise emission is optimized through the special design of the suction circuit and the use of sound insulation materials. Thermal output: range is 300-1200kW. Operation mode: The oil side is two sections of fire running, and the proportional adjustment can be achieved on the air side after installing the PID logic regulator and the corresponding probe. Power supply: usually three-phase, voltage is 230-400V, frequency is 50Hz. Rated fan motor current: 5.9-3.4A. Fan motor power: 1.5kW. Pump motor power: 0.55kW. Pump conveyance: 230kg/h at 12bar pressure. Protection level: IP44. Control box type: LFL1.333 (FS1) - LGK16 (FS2). Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and easy installation and maintenance.

Riello gas burner RS45-E

Riello gas burner RS45-E The RS45-E burner is in a fire operation mode, with protection level IP40. Its structure is compact and equipped with a damper servo motor, which can adjust the combustion air to ensure combustion efficiency. Burner output: 160-330kW, or 137,600-283,800kcal/h. Gas pressure: minimum 20mbar, maximum 100mbar. Power supply: single phase, 230V±10%, 50Hz. Motor running current: 2A, speed 2750rpm. Ignition transformer: primary 230V/0.2A, secondary 8kV/12mA. Electric power consumption: 0.43kW. Functional Features: Efficient combustion: The air volume is accurately controlled through the damper servo motor, so that the gas and air are fully mixed, and efficient combustion can be achieved, which can reduce fuel consumption and operating costs. Safety and reliable: complies with many European standards such as EMC 89/336/EEC, low voltage 73/23/EEC, and is equipped with safety devices such as pressure switches, which can monitor combustion status in real time and ensure safe operation. Easy to install: The burner has an adjustable combustion head length, and the connecting wires of the gas valve group can enter the burner from the left or right, making it easy to install and wiring.

Riello gas burner RS50-M

Riello gas burner RS50-M The RS50-M is a gas burner with a smooth transition of two-stage fires. It can also be adjusted proportionally by adding a PID regulator and a probe. The burner uses an integral cast aluminum shell, which has a compact structure and a small exterior size, making it easy to use and maintain. Its fan has a special pressure resistant structure, which allows the burner to operate safely on semi-positive and positive pressure boilers. The combustion head has a sliding connection flange, which allows the installer to install it in the appropriate position of the furnace. Catalog: about 500,000 calories/h. Scope of application: boiler, hot air furnace, heat treatment. Fuel: Gas. Air supply pressure: approximately 0.01MPa. Fuel consumption: about 20kg/h. Control method: proportional adjustment method. Protection level: IP40. Functional features: flexible combustion adjustment, high efficiency and energy saving, safe and reliable, low noise, and easy installation and maintenance.

Baltur gas burner TBG 60 P + Gas Valve group MB-DLE 415 B01 S20

TBG 60 P is a dual-section fire gas burner suitable for boilers, hot air furnaces and other equipment. MB-DLE 415 B01 S20 is its supporting gas valve set and other components. The burner uses lightweight die-cast aluminum alloy fan parts and is equipped with a high-performance centrifugal fan. The combustion head is a steel adjustable structure with stainless steel nozzles and flame diffusion discs. It is connected and fixed with the boiler through flange and insulating sealing ring, and has good thermal insulation and sealing. Power: 120-600kW. Natural gas flow: 12-60kg/h. Motor power: 0.75kW. Weight: about 42kg. Dimensions: approximately 970×570×480mm. Electrical protection level: IP44. Functional features: flexible combustion regulation, high efficiency and energy saving, low nitrogen emissions, safe and reliable, and convenient maintenance.

Krom schroder controller IFW 15-T

Krom schroder controller IFW 15-T The IFW 15-T is a device for flame monitoring and control, mainly suitable for burners using single-electrode ignition detection, and is commonly used in combustion control systems in industries such as petroleum, chemical, and natural gas. It features a high-strength heat-resistant plastic housing. The upper cover, which can be plugged and unplugged, contains the control circuit board, flame signal amplifier, and a green indicator light. The base mainly has terminal blocks, neutral wire bars, and ground wire bars, as well as two 5.5mm round holes for installation. Working voltage: 220/240V AC, -15/+10%, 50/60Hz, suitable for both grounded and ungrounded systems. Self-power: 12VA. Ionization electrode voltage: 230V AC. Flame ionization current: ≥1μA. Output signal: Two sets of passive contact switches, one normally open and one normally closed. Contact capacity: 2A. Environmental temperature: -20℃ to +60℃. Protection grade: IP40. Dimensions: 72mm × 82mm × 94mm. Weight: 370g. Main functions: Flame monitoring: Supports both ionization and UV ultraviolet flame monitoring methods. Through the built-in flame signal amplifier, the flame current signals detected by the electrode or UV sensor are converted into two sets of switch signals to indicate the presence or absence of flame. Control function: Enters standby mode after power-on. When a flame signal is received, the internal relay operates, and its relay switch can participate in various controls. It can be combined with a PLC to achieve various burner controller functions, and can control the operation or stop of the combustion system based on the flame status, ensuring the safety and stability of the combustion process. Status indication: Equipped with a flame detection panel signal light indication function, which can visually display the flame status, making it convenient for operators to understand the equipment operation in real time.

Krom schroder leak detector TC 410-1T (84765810)

Krom schroder leak detector TC 410-1T (84765810) TC 410-1T is a device used for detecting gas leaks, mainly for checking gas leaks in valve groups or two single valves before the burner is ignited or after it is extinguished to ensure the safety of the gas system. Power supply voltage: 220/240V AC, -15/+10%, 50/60Hz. Energy consumption: 10VA. Fuse: Fine wire fuse, slow-blow, type H as per IEC 127. Switching current of the valve / enabled output: 5A resistive load (UL listed: 5A at 120V), 2A at cos=0.35. Fault output: Dry contact (internal undamaged), 1A for 220/240V (high voltage: 264V), 2A at 120V. Test time: 10-60 seconds. Dimensions: 158mm × 120mm. Main functions: Gas leak detection: Can detect whether there is a gas leak in the valve group or two single valves before the burner is ignited or after it is extinguished, ensuring the safety of the gas system. Adjustable test time: The test time can be adjusted according to different test volumes by adjusting the leakage rate and inlet pressure, and an external pressure switch is required to set the pressure for coordination. Adapt to various system debugging: During the sequential test period, it can adapt to different system debugging, allowing for quick system startup. Safety certification: Passed EC type testing and certification, as well as FM and UL certifications, ensuring quality and safety.

Krom schroder BR 165RB burning head（74337857）

Krom schroder BR 165RB burning head（74337857） The BR 165RB burner head is a professional gas combustion equipment component, mainly used in industrial heating fields and can be used in conjunction with various gas burners. Its appearance may be cylindrical, with a specially designed head featuring gas injection holes and air mixing channels to ensure uniform mixing of gas and air for efficient combustion. It may be made of high-temperature and corrosion-resistant alloy materials, capable of stable operation in high-temperature environments and having a long service life. Fuel application range: The BR 165RB may also be suitable for common gas fuels such as natural gas and city gas. Rated thermal power: Its rated thermal power may range from 100 to 500kW. Gas pressure range: The applicable gas pressure range of the BR 165RB may be between 5 and 30kPa, ensuring normal operation under different gas supply conditions. Air flow demand: To ensure complete combustion, it is necessary to match an appropriate air flow. The expected air flow required by this burner head may be between 5 and 20m³/h, which is specifically related to the combustion power and fuel type. Outer dimensions: Its outer dimensions may be approximately 165mm in diameter (possibly related to the 165 in the model), and the length may vary according to the actual application scenario and installation requirements.

Ecoflam low nitrogen burner MAX GAS 350.2 LN P TM(3147268)

Ecoflam low nitrogen burner MAX GAS 350.2 LN P TM(3147268) MAX GAS 350.2 LN P TM is a MAX GAS series of low nitrogen burners suitable for a wide range of gases. The Ecoflam MAX GAS series burners are known for their high efficiency and reliable operation. They can help users save energy and reduce emissions, are easy to install and easy to maintain, and can be flexibly matched with boilers. Low nitrogen emission level: Level 3. Power consumption: 0.3/0.55/0.75kW. Suitable fuels: natural gas, liquefied gas, etc. Power supply: Can operate at a power supply of 50-60Hz. Main functions: efficient combustion, flame detection, convenient maintenance, strong fuel adaptability, safety protection, low nitrogen environmental protection.

Maxon burning head MODEL 400 (EB3)

Maxon burning head MODEL 400 (EB3) The MODEL 400 is a gas burner for industrial use, with a compact design for quick and easy installation, and simple on-site adjustment and maintenance. Thermal power can reach 4835kW/h, which can meet the large heat demand. In addition, the required fuel pressure is low and suitable for a variety of clean gases. Main functions: clean combustion, strong fuel adaptability, stable combustion, reliable driving.

RIELLO F5 burning cylinder（3006071）

RIELLO F5 burning cylinder（3006071） Product code: 3006071 Category: Fuel burner accessories Appearance dimensions: Combustion tube length L = 207mm, extended length L1 = 365mm. Type of burner and application scope: Suitable for Riello RL series two-stage oil-fired burners. The output range of this series of burners is 154 - 2700kW, and they can be used in various low-temperature and medium-temperature hot water boilers, hot air and steam generators, and thermal oil furnaces. Functions: Fuel delivery and atomization, air supply and mixing, flame stabilization and control, heat transfer and output, safety protection.

RIELLO G3-G20 oil pipe （3005720）

RIELLO G3-G20 oil pipe （3005720） Product code: 3005720 Category: Burner accessories This model is suitable for burners such as G5, G10, G20, G20S. External dimension: length is 1000mm. Joint specifications: G1/4 inner wire at one end and G3/8 inner wire at the other end. Function: convey fuel, adapt and connect, and ensure combustion efficiency.