Olympia OM-0N

Olympia OM-0N Product model:Olympia OM-0N OM-0N is a diesel combustion engine, the basic model of the brand's new OM series fuel burners, which is mainly used in small and medium-sized thermal energy equipment, such as boilers, industrial heating systems, etc. Fuel type: Diesel is used as fuel, suitable for thermal energy conversion scenarios of industrial equipment. OM-0N is a single-stage fire (On-Off control) fuel burner, with an output power range of 3~7kW, suitable for a 220V voltage environment. Core functions: combustion control, fuel adaptability, safety mechanism, installation characteristics. Applicable scenarios: Suitable for industrial scenarios where stable thermal energy supply is required, such as heat treatment equipment, drying equipment, etc. Category: Burne

Olympia OM-1N

Olympia OM-1N Product model:Olympia OM-1N OM-1N is a mid-range model among the brand's OM series fuel burners, mainly aimed at small and medium-sized industrial heating equipment and civil heating systems. OM-1N is positioned as a single-stage fire (On-Off control) fuel burner, adapted to a 220V voltage environment. Power range: fuel consumption 5~10kg/h, corresponding output power is about 58~116kW. Structural design: It adopts a compact metal shell with a dimension of φ135×180mm and a weight of only 11kg, making it easy to install on a space-constrained boiler or heating equipment. Modular components: Key components such as fuel pumps, nozzles, ignition electrodes, etc. can be quickly disassembled and replaced, and the maintenance cost is low. Core functions: combustion control logic, fuel adaptability, safety mechanism, installation and operation characteristics.

Bentone gas burner BG400

Bentone gas burner BG400 Model: BG400-2 (double section fire design) The BG400 burner is an industrial dual-section fire gas burner produced by Bentone AB, Sweden. It is mainly used for the thermal energy supply of boilers, hot air furnaces and other equipment. ‌Fuel Type‌: Natural Gas/LPG (LPG)‌ ‌Control method‌: Dual-segmental progressive (DSPGN), supports automatic switching between small fires/high fires. Functional Features ‌Double-segment fire operation‌: The gas and air ratio is adjusted through the servo motor to achieve high/low load switching, with significant energy saving effect‌. ‌Safety Protection‌: Equipped with flame detection (ion probe) and flameout protection (response time ≤5 seconds)‌ ‌Environmental Standard‌: Comply with European EN676 (gas) or EN267 (light oil) standards, and some models meet stricter emission requirements‌. Design Advantages Modular structure: components such as gas valve sets, program controllers (such as Landis & Staefa) can be quickly disassembled and maintained. ‌Adapability‌: Supports various fuels such as urban gas, natural gas, etc., and the intake pressure needs to be adjusted according to actual needs (such as the maximum natural gas of 360mbar)‌ Application scenarios: Equipment that requires stable heat sources such as industrial boilers, textile shaping machines, hot air furnaces.

Bentone gas burner BG 300

Bentone gas burner BG 300 BG 300 is a gas combustion equipment designed for industrial and commercial scenarios, mainly used in industrial thermal energy equipment. The model is BG300, which supports single-segment fire operation; the BG300-2 is a dual-segment fire model, which can realize incremental switching of two thermal powers‌. Thermal power: 160,000 kcal/hour (about 186 kW), suitable for urban gas, natural gas and other fuels‌. Core Components‌: The flame disc (stable flame disc) is made of stainless steel to ensure that the air and fuel are fully mixed. STG146 ignition needle, ion rod and other accessories are optional. Functional Features: ‌one.combustion control‌ ‌Double-segment fire model (BG300-2): Power switching is controlled by the servo motor, and the air/fuel ratio can be accurately adjusted to meet boiler requirements‌. ‌Single-segment fire model‌: stable output of fixed thermal power, suitable for scenarios where power fluctuations are not high. ‌two.Compatibility‌ Supports a variety of gas types, including natural gas, liquefied gas, etc. three.Safety and reliability Multiple protection mechanism: equipped with VPS 504 SO 2 leak detection system, overpressure protection valve and safety shutoff valve in accordance with EN 1287 to ensure safe operation. Categories:Branded burners Bentone Keywords:BG 300

RIELLO Motor G20 24V use（3003534）

RIELLO Motor G20 24V use（3003534） Motor G20 is a DC servo motor specially designed for burner control systems. It is mainly used to drive damper baffles or gas butterfly valves to achieve precise adjustment of the combustion process. The motor belongs to the G20 series and is designed for RIELLO burners (such as 40G20LC, GS20 and other models) and is adapted to a 24V DC power supply. Its core function is to optimize combustion efficiency and reduce emissions by precisely controlling the opening of the damper or gas valve. Voltage: 24V DC. Functional Features: ‌one.Servo control‌ 24V DC power supply, the damper opening is controlled through pulse signals or analog quantities to achieve accurate adjustment of the air/fuel ratio‌ two.combustion regulation control Shaker drive: In two-stage fire or proportional adjustment burners, the motor adjusts the damper opening according to load requirements to ensure the best air/gas ratio (such as the damper opening is 20-30° during low fire, and 90° fully open at high fire). three.Safety and reliability Overheating protection: Built-in temperature sensor, which automatically cuts off the power supply when the motor temperature exceeds 80°C to prevent burning. Application scenarios one. Burner type Fuel burner: such as RIELLO 40G20LC, used to drive dampers to regulate air volume and optimize light oil (diesel) combustion efficiency. Gas burners: such as GS20 series, controls the opening of gas valves and is suitable for fuels such as natural gas, LPG. Two. Typical Application Industrial Boiler: In steam boilers or hot water boilers, the combustion parameters are dynamically adjusted according to the load to reduce NOx emissions (≤80 mg/m³). Categories：Burner Accessories RIELLO

RIELLO electromagnetic jammer (3012155)

RIELLO electromagnetic jammer (3012155) Electromagnetic jammer is an electromagnetic compatible (EMC) component designed for burner control systems. It is mainly used to suppress high-frequency electromagnetic interference (EMI) and ensure the stability and reliability of burner control signals. Purpose: Used to suppress electromagnetic interference (EMI) in the burner control system, ensure stable signal transmission, and prevent malfunction or failure. Applicable equipment: mainly equipped with Riello burner control systems, such as RS5D, GS20, BG300 and other series. Functional Features oen.Electromagnetic interference suppression: Reduce electromagnetic noise generated by ignition transformers, relays, motors and other equipment, prevent signal interference from causing malfunctioning or shutdown of the burner. It is suitable for 24V DC control circuits to protect sensitive components such as servo motors and ion probes. Compatibility: Adaptable to Riello RS5D, GS20, BG300 and other burner control systems. three.Easy to install: Standard terminals are used, which can be directly connected in series in the control circuit. Maximum continuous voltage: 250V AC.50/60HZ. Application scenarios: industrial burners (boilers, dryers, hot air furnaces, etc.), gas/fuel burner control systems, industrial environments with severe electromagnetic interference. Categories：Burner Accessories RIELLO

RIELLO Motor（3005820）

RIELLO Motor（3005820） Motor is an AC asynchronous motor designed specifically for burner systems. It is mainly used to drive the air impeller and oil pump of the burner, and is suitable for Riello 40G series burners (such as G20, G20LC, G20S). Voltage/Power: 230V AC ±10%, 50Hz, maximum power 150W, start current ≤3A, running current ≤1.2A. Speed: no-load speed is 2750 RPM, and the output speed is about 1400 RPM after deceleration through the burner gearbox, matching the operating requirements of the fan and oil pump. Purpose: Mainly used for damper adjustment or servo control of gas/fuel burners to ensure the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS5D, GS20, BG300‌ and other burner series. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signals or analog quantity to achieve accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as BG300-2) to smoothly switch power gears. two.Safety protection‌ Built-in overload protection, triggering LED alarms during failure (such as yellow flashing prompts the protection device to fail). Comply with ‌EN676 standard‌, adapted to PELV safe voltage (18-30V DC). three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive. Typical Application ‌Shield drive for gas burners‌ (such as Riello GS20, RS5D series). ‌combustion control system for industrial boilers and drying equipment. Categories：Burner Accessories RIELLO

RIELLO RS190 Motor (20050960)

RIELLO RS190 Motor (20050960) RS190 Motor‌: It is a special motor for the Riello RS190 series. Purpose: It is mainly used for servo control of gas/fuel burners, adjusting the damper opening to achieve the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS190 series burners‌ (such as RS190-2, RS190-3, etc.). Voltage/current: 24V DC, rated current ≤ 30mA (closed circuit), instantaneous inrush current ≤ 10A (<2s)‌. ‌Interface type‌: 4-pin M12 socket, supports PNP signal input/output‌. Protection level: IP55 (dust-proof and waterproof), suitable for industrial environments. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signal or analog quantity to ensure accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as RS190-2), which can smoothly switch power gears‌. two.Safety protection‌ Built-in overload protection, triggering LED alarm when a fault is caused (such as yellow flashing to indicate a faulty protection device)‌ Adaptable to PELV safe voltage (18-30V DC)‌ three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive‌. Typical Application ‌Shake drive for gas burners‌ (such as the Riello RS190 series). ‌combustion control system for industrial boilers and drying equipment‌. Categories：Burner Accessories RIELLO Keywords: RS190

Fisher pressure reducing valve HSR-1628-87959

Fisher pressure reducing valve HSR-1628-87959 HSR-1628-87959 is a spring-loaded pressure reducing valve produced by Fisher in the United States. It is specially designed for gas systems and is suitable for medium and low pressure pressure regulation of natural gas, liquefied petroleum gas, artificial gas and other media. Functional Features: One. Self-operated pressure regulation The outlet pressure is stabilized by balancing the spring force and the medium pressure, without external energy driving, high pressure regulation accuracy and small outlet fluctuations. two. Safe pressure relief mechanism Built-in pressure relief device. When the outlet pressure exceeds the set value, the diaphragm will automatically leave the valve seat to release the pressure to prevent the system from overpressure. Three. Wide operating conditions adaptability Pressure range: The maximum inlet pressure is 8.6 bar, and the adjustable outlet pressure range is 0.34-34.5 bar. Temperature range: Operating temperature covers -29"C to 82°C, adapting to extreme environments. Four.Flexible installation and maintenance Compact structure, supports installation in any direction, suitable for space-constrained scenarios. Connection method: internal thread (DN25 diameter) Applicable media: natural gas, liquefied petroleum gas, air, etc.

Fisher pressure reducing valve MR95H

Fisher pressure reducing valve MR95H MR95H is a direct-acting pressure regulator produced by Fisher in the United States. It belongs to the MR95 series industrial pressure reducing valves and is specially designed for rigorous pressure control applications. Functional Features: ‌One.Wide range pressure regulation‌ It adopts a spring film structure, with an adjustable outlet pressure range covering 0.35-10.3 bar (low pressure configuration) or 1.0-27.6 bar (high pressure configuration). It is suitable for various media such as natural gas, steam, and nitrogen. ‌Two. High temperature and high pressure adaptability‌ ‌Working temperature‌: Standard type is suitable for -29℃ to 82℃, high temperature type (MR95HT) can withstand 343℃‌. ‌Maximum inlet pressure‌: 600 psig (41.4 bar), meeting industrial high pressure demand‌. ‌Three.Modular Design‌ Supports quick replacement of valve inner parts for easy maintenance; provides threaded (NPT) or flange connections, with dimensions covering 1/4 to 2 inches (DN6-DN50). ‌Four.Safety and precision control‌ The built-in synthetic rubber valve seat enables tight shutdown, and the differential pressure configuration model (such as MR95HD) can accurately control the pressure differential. Typical application scenarios ‌Industrial gas system‌: Natural gas and liquefied petroleum gas pressure regulation‌. ‌Steam system‌: Boiler feed water, superheated steam to reduce pressure‌. ‌Special process‌: nitrogen purge, test equipment pressure control‌.

Fisher pressure reducing valve MR98H

Fisher pressure reducing valve MR98H MR98H is a direct-acting pressure regulator produced by Fisher. It belongs to the MR98 series industrial pressure reducing valve, designed for high-pressure gas and steam systems. Drive mode: pneumatic or manual (T-shaped handle) Functional Features: ‌One. High voltage regulation capability‌ The outlet pressure can be adjusted from 1.0 to 13.8 bar (15 to 200 psig), which is suitable for high-pressure control of natural gas, steam, nitrogen and other media. ‌Two.Modular Design‌ Supports quick replacement of valve inner parts for easy maintenance; provides threaded (NPT) or flange connections, sized to DN6 to DN25 (1/4 to 1 inch)‌ T‌hree.Safety and precision control‌ The built-in synthetic rubber valve seat enables tight shutdown, and the differential pressure configuration model (such as MR98HD) can accurately control the pressure differential. ‌Four. Broad operating condition adaptability ‌Applicable media‌: gas, liquid, air and steam‌. Typical application scenarios ‌Industrial gas system‌: Natural gas and liquefied petroleum gas pressure regulation‌. ‌Steam system‌: Boiler feed water, superheated steam to reduce pressure‌. ‌Special process‌: nitrogen purge, test equipment pressure control‌. Categories：Burner Accessories Fisher

Fisher pressure reducing valve 627-1217-2022629 5-20PSI

Fisher pressure reducing valve 627-1217-2022629 5-20PSI 627-1217-2022629 is a direct-acting pressure reducing valve, belonging to the Fisher 627 series pressure regulator, specially designed for gas media such as natural gas, liquefied petroleum gas, etc., and is suitable for medium and high pressure systems. Functional Features: ‌One. Self-reliable pressure regulating‌ The spring film structure realizes automatic adjustment of outlet pressure, no external energy drive required, high pressure regulation accuracy and sensitive response. ‌Two. Wide pressure range adaptation‌ ‌Export pressure‌: 5-20 PSI (0.34-1.38 bar), meeting user-specified needs‌. ‌Inlet Pressure‌: up to 17.2 bar (250 PSI), suitable for high-pressure air sources‌. ‌Three. Flexible installation and maintenance‌ Supports installation in any direction, and the valve body is connected by DN50 (2-inch) NPT thread. It can be maintained online and has a modular design that facilitates quick replacement of valve inner parts‌. ‌Four.Safety and Reliability‌ Built-in pressure relief valve and tight shutdown function to prevent system overpressure; the valve core is made of steel/stainless steel + nitrile rubber, which has strong corrosion resistance. Applicable media: natural gas, liquefied petroleum gas, artificial gas, air, etc. Typical applications: urban gas pressure regulating stations, industrial gas supply systems, burner supporting facilities or high-pressure gas source decompression.

Fisher pressure reducing valve EZR DN50 300RF 130-200PSI

Fisher pressure reducing valve EZR DN50 300RF 130-200PSI EZR series DN50 300RF (outlet pressure 130-200 PSI) is a commander-acting pressure reducing pressure regulator designed for high-pressure systems such as natural gas and industrial gases. Functional Features: ‌One. High-voltage precision adjustment‌ Adopting a pilot structure, the outlet pressure can be accurately controlled at 130-200 PSI (8.96-13.79 bar), suitable for high-pressure gas delivery systems. ‌Two. Strict working conditions adaptability‌ ‌Inlet Pressure‌: up to 1050 PSIG (72 bar), meeting the needs of high-pressure gas sources‌. Temperature range: -29℃ to 127℃, adapting to extreme environments. ‌Three.Safety and Reliability‌ ‌Quick shutdown‌: EZROSX models are equipped with OS2 cutting device, which automatically cuts off airflow when overpressure/underpressure. ‌Debris-proof design‌: Stainless steel inlet filter and metal plug structure protect the valve membrane, extending the maintenance cycle‌. F‌our.Modular Maintenance‌ The DN50 (NPS 2) valve body supports 300RF flange connection, which can be repaired online and is convenient to replace the valve inner parts. ‌Noise Reduction Design‌: Standard cage reduces noise by 6-8 dBa‌. Typical applications: high-pressure pressure reduction at natural gas distribution stations, industrial gas equipment gas supply system.

Baltur motor XS 5-3007

Baltur motor XS 5-3007 XS 5-3007 is a single-phase capacitor-starting asynchronous motor designed for burners. It is produced by Italian company SIMEL. It is mainly used to drive the fan impeller of the burner and provide stable combustion air. Rated power: 0.37 kW (at 50Hz). Voltage/Frequency: 230V AC, 50Hz, current 2.5A. Capacitor specification: 14 μF, for start-up assistance. Speed: 2800 rpm (two-pole motor, synchronous speed 3000 rpm, slip rate is about 6.7%) Protection level: IP44. Dust-proof and splash-proof, suitable for humid or dusty industrial environments. Single-phase capacitor starts asynchronous motor: starts with phase separation of capacitors, and the capacitor exits during operation. The structure is simple and reliable, suitable for intermittent loads such as burners. Direct drive: The motor shaft is directly connected to the fan impeller, no additional transmission is required, reducing energy loss. Core functions: stable air supply, reliability and durability, and low maintenance requirements. Application scenarios: One. Gas Burner It is suitable for burners such as Baltur brand TBG35, TBG35P, TBG35PN, etc., and is used for the supply of combustion air for boilers, furnaces, and industrial heating equipment. Two. Light oil burner Some models (such as the TBL series) may require a dual motor configuration, with the XS 5-3007 driving the fan and the other motor driving the oil pump for oil and gas mixed combustion. Three.Other industrial equipment It can be used as a power source for small fans and pumps, and is suitable for scenarios with high volume and reliability requirements.

Schneider RS5D motor (3002659)

Schneider RS5D motor (3002659) Product Number：3002659 Categories：Burner Accessories RS5D is a compact stepper motor designed for industrial automation and is a core component of the Lexium series of integrated drive solutions. Three-phase stepper motor: adopts open-loop control, accurately controls the rotation angle and speed through pulse signals, without encoder feedback, and is suitable for low-cost and high-precision positioning scenarios. Integrated drive design: The motor has built-in control circuit, supports various industrial communication protocols such as CANopen, Profibus DP, RS485, etc., and can be directly connected to PLC or motion controller to simplify the system architecture. AC voltage/frequency: 230VAC, 50/60HZ. Core functions: high-precision positioning control, flexible communication and configuration, reliability and durability, low maintenance requirements.