Burners
Contact us
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Baltur gas burner TBG 45 P Product model:TBG Product code: 17210010 TBG45P is an industrial-grade gas burner produced by Baltur, Italy. It belongs to the P series low-nitrogen burner. It is specially designed for boilers, thermal oil furnaces and other equipment, and supports natural gas or liquefied petroleum gas (LPG) fuel. Its core features include two-stage fire regulation, low emission technology and modular maintenance design. Maximum power: 450KW, minimum power: 100KW. Fuel type: natural gas. Combustion method: Double-section fire or proportional adjustment combustion method, which supports mixed combustion of air and gas. Functional Features Gas flow regulation: The gas flow is accurately controlled through an electric two-stage working valve, supporting the installation of valve seal control device. Convenience: No need to disassemble the burner to maintain, equipped with 7-hole couplings to fix the boiler . Low energy consumption and silent design: high ventilation efficiency and low operating noise. Safety Performance: Equipped with combustion gas recirculation air ducts to effectively reduce pollutant emissions. The burner is imported from Italy and is suitable for all kinds of industrial boiler scenarios, both environmentally friendly and efficient. Categories:Branded burners Baltur
Baltur gas burner BTG 20 P Product model:BTG BTG 20 P is an industrial-grade gas burner produced by Baltur, Italy. It belongs to the P series dual-section fire burner. It is specially designed for boilers, thermal oil furnaces and other equipment, and supports natural gas or liquefied petroleum gas (LPG) fuel. Its core features include low nitrogen oxide (NOx) emissions, modular structure and high-energy-efficient combustion technology. Output power: 60-205 kW (compliant with ERP standards), adjustment ratio is 1:3.4, and high/low fire mode can be flexibly switched to match different load requirements. Fuel type: natural gas (G20), gas flow range 6.3-21.7 Sm³/h, adapted to common gas supply pressure (3-5 kPa). Power supply specifications: single-phase AC 230V±10% (50/60Hz), fan motor power is 0.5 kW, total power consumption is about 0.65 kW. Protection level: Electrical equipment IP40, adapted to general industrial environment. Core functions: Combustion regulation and control Two-stage operation: high/low fire precise switching is achieved through pneumatic drive valve group to meet different load needs. Safety and reliability Multiple security protection: The ion electrode detects flames in real time to prevent accidental shutdown. The air pressure switch monitors the combustion-assisted air flow to avoid combustion abnormalities due to insufficient air volume. Convenience of maintenance Standardized components: Use industry-wide accessories, such as gas filters, ignition transformers, etc. to reduce maintenance costs and spare parts inventory pressure. Environmental performance Low nitrogen combustion technology: through combustion head optimization and flue gas recirculation design, suitable for areas with strict environmental protection requirements. Efficient combustion: Combustion efficiency is up to more than 90%, reducing energy waste and carbon emissions. Categories:Branded burners Baltur
Baltur oil and gas dual-purpose burner TBML 260MC （56640010）
Baltur oil and gas dual-purpose burner TBML 260MC （56640010） Product code: 56640010 TBML 260MC (56640010) is an oil and gas dual-purpose burner that adopts a modulated/progressive two-stage fire design, supporting the alternating use of gas and fuel. Minimum thermal power: 500KW, maximum thermal power: 2600KW. Dual fuel mode: The gas side adopts a progressive two-stage fire (mechanical cam adjustment), and the fuel side is a two-stage fire running, and the fuel type can be manually switched. Functional Features Fuel Switching: The electromagnetic clutch enables rapid switching between gas and fuel, compatible with multiple fuel combinations. combustion control: Equipped with a UV photoelectric flame detection system to ensure combustion stability; combustion air conditioning device optimizes combustion efficiency. Safety Guarantee: The electrical system has IP54 protection level to prevent moisture and dust from invading; the fuel circuit contains safety valves and pressure regulating devices. Adapability: Sliding connection flange design, can match different models of heat generation. Technical Specifications The power range covers 0.18 to 3.6 MW, and both the gas and fuel sides support independent power adjustment, which is suitable for industrial boilers, heating equipment and other fields. The burner has passed CE certification and complies with EU environmental standards, and is suitable for scenarios with strict emission requirements. Categories:Branded burners Baltur
Riello oil burner RL50 The RL50 Combustor is an efficient combustion device designed for small and medium-sized industrial and commercial scenarios, with two-stage fire regulation, intelligent control and low emissions characteristics. Model: RL50 (fuel version) Fuel type: Natural gas/LPG. Maximum thermal efficiency: 90%. Scope of application: hot water/superheated water boiler, hot air generator, steam boiler and thermal oil furnace. Adjustment method: Smoothly transition two sections of fire to adjust. Fuel Compatibility: Fuel Version: Light Oil (such as Diesel) Dual fuel version: Supports fuel/natural gas/liquefied gas switching (RLS50/M) Power range: 50 kW (fuel version) or 178-332 kW (duplex version) Functional Features combustion control: One-segment fire adjustment (RL50) or Double-segment fire adjustment (RLS50/M) An optional microelectronic control box provides operation status and fault diagnosis functions. Structural Design: Use forward-tilt blade fans and sound insulation materials to reduce noise emissions. The shell is partly made of engineered plastic to reduce weight and improve durability. Safety Protection: Equipped with UV flame detectors (such as FC13 electric eye) Fuel circuit integrated pressure regulating valve and safety valve Application scenarios Industrial heating equipment: hot water boiler, steam boiler, thermal oil furnace, hot air generator. Categories:Branded burners Riello
Riello oil burner RL250 The RL250 Combustor is a two-stage fire burner specially designed for medium and large industrial and commercial thermal equipment, with high power output, intelligent control and efficient combustion characteristics. Fuel Compatibility: Fuel Version: Light Oil (such as Diesel) Dual fuel version: Supports fuel/gas switching (RLS250/M) Power range: 2290 kW. Power supply: three-phase 380V, 50Hz. Adjustment method: Two-stage fire adjustment (mechanical or smooth transition) Optional PID ratio adjustment (probe required) Applicable fuel: Light oil (diesel) or natural gas/liquefied gas (dual fuel version) Fuel consumption: 100 kg/h (fuel version) Atomization Form: High Pressure Atomization (Fuel Version) Adjustment method: Two-stage fire adjustment (mechanical or smooth transition) Functional Features combustion control: Two-stage fire adjustment: supports smooth transition or mechanical segmentation adjustment to meet different load needs. Proportional Adjustment: PID regulator can be installed to achieve more accurate power control. Structural Design: Vertical structure, suitable for industrial equipment such as boilers, hot air generators, thermal oil furnaces, etc. Low noise design: Forward-tilting blade fan + sound insulation material to reduce operating noise. Safety Protection: Equipped with flame detectors (such as UV photoelectric tubes) Fuel circuit integrated pressure regulating valve, safety valve, etc. Application scenarios: Industrial heating equipment: steam boiler, hot water boiler, thermal oil furnace, hot air generator. Categories:Branded burners Riello
Riello oil burner RG3 RG3 is a fuel combustion engine that adopts a single-stage fire regulation method and is suitable for providing a stable heat source in industrial production. Fuel type: Fuel (such as diesel) Power: 178kW, heating capacity reaches 150,000 kcal/hour. Functional Features Efficient combustion: Enable full combustion through optimized design and reduce energy consumption. Safety Guarantee: Equipped with safety protection devices to avoid combustion accidents . Intelligent control: Using an electronic proportional adjustment system, the output power can be accurately adjusted . Multiple scenarios: suitable for boilers, industrial furnaces and other equipment, compatible with fuel and fuel. Combustion control: single-stage fire adjustment, mechanical control; optional programming controller (such as RMO series) to achieve automated operation. Structural Design: Compact gun-type housing for easy installation. High-pressure atomization nozzle ensures full combustion of fuel. Safety Protection: Equipped with UV flame detectors (such as FC13 electric eye) Oil circuit integrated pressure regulating valve and shut-off valve. Categories:Branded burners Riello
Riello oil burner RL190-M RL190-M belongs to the RL/M series two-stage fire light oil burner, designed for medium and large industrial thermal energy equipment, and has the characteristics of efficient combustion, intelligent control and compact structure. Model: RL190-M (fuel version) Fuel Compatibility: Fuel version: Light oil (diesel, maximum viscosity at 20℃≤6mm²/s) Dual fuel version: Supports fuel/natural gas/liquefied gas switching (RLS190/M) Power range: 1.9 million kcal/hour. Power range: 1423-2431 KW, adapted to various power requirements. Functional Features combustion control: Two-stage fire adjustment (RL190-M), supports smooth transition or mechanical switching. Optional microelectronic control box (such as RMO 88.53) provides operation status and troubleshooting functions. Structural Design: High-pressure atomization nozzle ensures full combustion of fuel. The fan adopts a forward-tilt blade design to reduce noise. Safety Protection: UV flame detector (such as FC13 electric eye) Oil circuit integrated pressure regulating valve and safety valve. Two-stage fire design: control combustion intensity in segments, optimize combustion efficiency, and reduce energy consumption. Proportional adjustment: Supports precise adjustment of combustion output to adapt to changes in dynamic working conditions. Safety Protection: Equipped with flame detectors, solenoid valves and other safety devices to ensure operational stability. Application Scenarios Industrial Boilers: Hot water boilers, steam boilers, thermal oil furnaces. Hot air equipment: dryer, coating line, etc.
Riello Dual fuel burner RLS130
Riello Dual fuel burner RLS130 Model: RLS130 RLS130 belongs to the RLS series dual fuel two-stage fire burner, designed for medium and large industrial and commercial thermal energy equipment, supports two fuels, light oil (diesel) and gas (natural gas/LPG), and has the characteristics of efficient combustion, intelligent control and flexible adaptation. Output power: 930-1512kW in high fire mode, 465kW in low fire mode. Power supply requirements: 3-phase 380V, 50Hz, motor power 2200W. Fuel compatibility: light oil (diesel, maximum viscosity at 20"C ≤6mmz/s); natural gas/liquefied gas (valve group needs to be switched) Power range: 465-1163 kW (fuel) or 349-1163 kW (gas) Control method: Second-stage fire adjustment (smooth transition) Core functions: two-stage fire intelligent adjustment, microprocessor control system, efficient combustion and environmental protection performance, and safety protection mechanism. Dual fuel switching valve group (such as MBZRDLE415B01S20 gas valve group) High-pressure calcification nozzle (fuel) and gas ratio control valve (fuel) Application scenarios: Mainly used in industrial boilers, drying equipment, heat treatment devices, etc. where high-calorie value burners are required. Categories:Branded burners Riello
Riello gas burner RS130-M Model: RS130/M RS130-M is a gas burner, belonging to the RS series two-stage fire gas burner, designed for medium and large industrial and commercial thermal energy equipment, with the characteristics of efficient combustion, intelligent control and flexible adaptation. Calorie: 1.3 million calories per hour. Fuel: Natural gas/liquefied gas. Suppressure: 12 KPa Voltage: 220-380V Power range: 254-1600 kilowatts. Functional Features Two-stage fire adjustment: Supports smooth two-stage fire operation, and proportional adjustment can be achieved through PID regulator to improve combustion efficiency and reduce fuel consumption. Electronic control system: equipped with a status display screen, which can monitor operating parameters (such as the number of ignitions, fault information and operating time) in real time. Low noise design: Use forward-tilt blade fans and sound insulation materials to reduce operating noise. Multiple fields: Suitable for hot water boilers, hot air furnaces, steam boilers and thermal oil furnaces, compatible with a variety of fuel types. Application scenarios: Mainly used for industrial equipment such as food drying, rotary kilns, hot air furnaces, etc., providing stable heat source support. Categories:Branded burners Riello
Riello gas burner 40 GS20-M GS20-M is an industrial gas burner of the RIELLO brand. It belongs to the proportional-adjusted burner series and is mainly used in boilers, hot air generators and industrial heating equipment. The output power is 43/82 +194kW. The operating temperature range is 0-40℃. The power supply is 1/230V/50Hz, and the total power supply is 0.250kW. Fuel type: Supports natural gas, liquefied gas and other gas, which is fully burned and energy-saving. Adjustment method: proportional adjustment (M model), which can accurately control the gas and air mixing ratio to achieve low nitrogen emissions (reduce nitrogen oxides by 30%~50%) Functional Features Double-segment fire design: Some models (such as FS20) support smooth double-segment fire adjustment to meet different load needs. Electronic control: equipped with RS810E and other controllers, supporting operating parameter monitoring and fault diagnosis (such as red light alarm, pressure abnormality, etc.) Low noise: Use front-tilt fan blades and sound insulation materials to reduce operating noise. Safe and reliable: Equipped with multiple safety protection devices (such as flame detectors, pressure switches) to ensure the safety of equipment operation. Servo motor control function: The servo motor can drive the damper to standby state and close the fully closed, low and high-fire positions, accurately control the air flow, thereby achieving good combustion effect. Applicable scenarios: Suitable for all kinds of boilers, hot air furnaces and industrial heat treatment equipment, especially for scenarios with high requirements for temperature control accuracy. Categories:Branded burners Riello
Riello gas burner RS410-M MZ RS410-M MZ is a high-performance gas burner specially designed by RIELLO for industrial thermal energy equipment. It belongs to the RS 310-610/M MZ series and is suitable for medium and low temperature hot water boilers, steam boilers, thermal oil furnaces and drying equipment. Output power: 800-4900 kW (natural gas G20), covering medium and high load demand in the industrial field. Operating mode: Supports "smooth two-section fire" or upgrades to proportional adjustment mode by installing a PID ratio regulator (the adjustment ratio can reach 1:4), and the combustion efficiency can be dynamically adjusted according to the actual load. Fuel type: gaseous fuels such as natural gas (G20), adapted to gas supply systems of different pressure levels (maximum gas pressure can reach 500 mbar). Power supply and protection: three-phase power supply (such as 3/400V/50Hz), electrical protection level IP54, suitable for harsh industrial environments. Functional Features Operation mode: Supports "smooth two-section fire" or proportional adjustment to adapt to different working conditions. Efficient combustion: Integrated design ensures high combustion efficiency, reduces fuel consumption and operating costs. Low Nitrogen Technology: Some models (such as BLUs) reduce nitrogen oxide emissions by optimizing combustion head design. Application scenarios: industrial boilers (hot water/steam), thermal oil furnaces, hot air furnaces, etc. Categories:Branded burners Riello
Riello Oil and gas dual-purpose burner RLS68Mx
Riello Oil and gas dual-purpose burner RLS68Mx RIELLO RLS68/M MX Burner is a dual-purpose oil and gas combustion device designed for hot water boilers, steam boilers and thermal oil furnaces, supporting natural gas or light oil as fuel. Output range: 200-860 kW (light oil mode). Fuel consumption/gas consumption: 17-73 kg/h (light oil) or 0.01 m³/h (natural gas). Supply pressure: 7 kPa . Running mode: Smooth switching between two sections of fire: drive the fuel valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: After installing a PID ratio adjuster (such as RWF40), the adjustment ratio can reach 1:4, adapting to dynamic load requirements. Fuel supply: Dual fuel compatible design, can quickly switch between natural gas and light oil, adapt to different energy supply conditions. Power supply and protection: three-phase power supply (3/400V/50Hz), electrical protection level IP44, suitable for conventional industrial environments. Functional Features Dual fuel adaptation: Oil and gas switching can be achieved by changing the fuel type to meet different energy needs. Low nitrogen emission design: adopt low nitrogen combustion technology. High-efficiency thermal energy conversion: Dual-section fire control mode improves combustion efficiency and reduces fuel consumption. Silent Design: Optimize the application of air intake circuits and silence materials, and the operating noise is lower than industry standards. Flexible maintenance structure: Modular design is easy to install and maintain, and has strong accessories compatibility. Applicable scenarios Suitable for industrial hot water supply, steam production and heating of thermal energy equipment, it is especially suitable for industrial scenarios where efficient energy utilization is required. Categories:Branded burners Riello
Riello gas burner RS68-E BLU RS68-E BLU is a low-nitrogen gas burner of the RIELLO brand, designed for boiler low-nitrogen transformation and industrial heating equipment. Output power: 150-860 kW (natural gas G20), covering medium and low load demand in the industrial field. Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire;. Proportional adjustment upgrade: After installing a PID ratio adjuster (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:4, adapting to dynamic load requirements. Fuel type: gaseous fuels such as natural gas (G20), suitable for gas pressure range of 4-50 mbar (integrated valve group) or 20-40 mbar (combined valve group), with a maximum gas pressure of 500 mbar. Power supply and protection: three-phase power supply (3/400V/50Hz), electrical protection level IP44, suitable for conventional industrial environments. Functions: electronic proportional adjustment, low nitrogen design, fully automated control, safety protection mechanism, low noise and environmental protection performance. Two-stage fire precise control: the servo motor drives the damper and gas valve, achieving seamless switching between high and low fires and fast response speed. Categories:Branded burners Riello
Riello gas burner RS34 MZ RS34 MZ is a high-performance gas burner designed by RIELLO for small and medium-sized industrial thermal energy equipment. It belongs to the RS series and is suitable for hot water boilers, steam boilers, thermal oil furnaces and hot air furnaces. Power supply and protection: Single-phase power supply (1/230V/50Hz), electrical protection level IP40, suitable for conventional industrial environments. Fuel type: Natural gas (G20), suitable for gas pressure range of 4-33 mbar (integrated valve group) or 20-40 mbar (combined valve group), maximum gas pressure can reach 500 mbar. Fuel Type: Supports natural gas (G20/G25) and liquefied petroleum gas. Control method: Smooth two-section fire or mechanical proportional adjustment (MZ model). Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: optional PID ratio regulator (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:6 to meet dynamic load requirements. Core functions: combustion regulation and energy efficiency optimization, safety protection mechanism, intelligent and convenient maintenance, low noise and environmental protection performance. Scope of application: It is suitable for hot water, superheated water boilers, steam boilers and thermal oil furnaces, and is compatible with a variety of industrial scenarios. Categories:Branded burners Riello
Riello gas burner RS44 MZ RS44 MZ is an industrial-grade gas burner of the RIELLO brand. It belongs to the RS series and is designed for boilers and industrial heating equipment. Output power: 80/200÷ 550 kW (natural gas G20), adapting to medium and high load requirements of small and medium-sized industrial equipment. Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: optional PID ratio regulator (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:6 to meet dynamic load requirements. Fuel type: Natural gas (G20), suitable for gas pressure range of 4-33 mbar (integrated valve group) or 20-40 mbar (combined valve group), maximum gas pressure can reach 500 mbar. Power supply and protection: Single-phase power supply (1/230V/50Hz), electrical protection level IP40, suitable for conventional industrial environments. Functional Features High adaptability Suitable for half-ton boilers and various thermal energy equipment, adapting to different scenario needs. Safety Guarantee Equipped with safety components such as flame detectors, damper actuators, etc., to ensure the combustion process is stable and controllable. Control Performance It adopts segmented combustion technology, supports ignition detection, oxygen content monitoring and other functions to improve combustion efficiency and safety. Categories:Branded burners Riello
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China