Riello Light oil burner 40 G20 LC

Riello Light oil burner 40 G20 LC RIELLO 40 G20 LC is a single-stage fire light oil burner launched by Riello. It is designed for small and medium-sized boilers, industrial heating equipment and some mobile scenes. It has the characteristics of high efficiency, stability, low noise and easy maintenance. Fuel type: light oil (diesel), supports automatic control. The output power covers 95-213 kW, corresponding to fuel consumption of 8-18 kg/h, which can meet the thermal energy needs of most small and medium-sized industrial boilers or large residential buildings. It adopts a single-phase power supply of 230V/50Hz, motor power is 150W, capacitor is 5μF, operating current is 1.5A, and speed is 2850 rpm. Functional Features ‌Safety Certification‌: Comply with European EN267 standards, passing EMC, low voltage and mechanical safety certification‌. ‌Part Utility‌: Share high-quality parts with other 40 series models (such as flame detectors, servo motors, etc.)‌ ‌Energy saving and environmental protection‌: Fuel viscosity supports up to 1.5, optimize combustion efficiency and reduce energy consumption. ‌ ‌Structural Optimization‌: Adopt a compact design to reduce noise and adapt to a variety of boiler installation needs. Application scenarios Industrial field: Suitable for small and medium-sized steam boilers, thermal oil furnaces, hot air furnaces and other equipment, and is widely used in food processing, textile printing and dyeing, chemical industry and other industries. Categories:Branded burners Riello

Riello BS2D (3761658）

Riello BS2D (3761658） BS2D is a commercial gas burner produced by RIELLO, Italy. It belongs to the two-stage fire model in the BS2 series. It is specially designed for industrial boilers and heating systems, with high efficiency, low emissions and intelligent control characteristics. Applicable fuels: natural gas (G20/G25), liquefied petroleum gas (LPG), suitable for gas pressure range of 20-100 mbar. Output power: 35-91 kW (30.1-78.2 Mcal/h), which can be flexibly adjusted through two-stage fire modes (small fire 35-40 kW, large fire 91 kW) to meet different load needs. Gas consumption: Based on natural gas with a net calorific value of 8-12 kWh/m³, the maximum gas consumption is about 9.1 m³/h. Power supply: single-phase 230V/50Hz, motor power 180W, start current 3A, adapted to conventional mains network. Control box: The MG569 microprocessor control box is standard, supporting fault diagnosis and status display. Functional Features ‌Safety Design‌: Integrated flame detection, gas pressure switch and air pressure switch to ensure safe operation‌. ‌Installation convenience‌: Modular design, supports rapid installation and debugging, and is compatible with various boiler types‌. Combustion control Two-stage fire modes: Automatically switch small fire (pre-purging/low load) and large fire (full load operation) through temperature control signals, suitable for scenarios with high requirements for temperature stability (such as hot water boilers, hot air furnaces) Application scenarios Industrial field: Suitable for small and medium-sized steam boilers, thermal oil furnaces, drying equipment, etc., and is widely used in food processing, textile printing and dyeing, chemical industry and other industries. Categories:Branded burners Riello

Riello gas burner BS3D

Riello gas burner BS3D BS3D is a dual-section fire gas burner, mainly used in industrial boilers, thermal energy equipment and other fields. Power supply: single-phase 230V/50Hz, motor power 350W, start current 3A. Applicable fuels: natural gas (G20/G25), liquefied petroleum gas (LPG), suitable for gas pressure range of 20-100 mbar. Output power: 65-189 kW (55.9-162.5 Mcal/h), flexibly adjustable through two-stage fire modes (small fire 65-75 kW, big fire 189 kW) to meet different load needs. Gas consumption: Based on natural gas with a net calorific value of 8-12 kWh/m³, the maximum gas consumption is about 18.9 m³/h. Functional Features Second-stage fire design: Accurate firepower adjustment through dual-stage control, suitable for low-nitrogen emission scenarios. ‌Fuel adaptability‌: supports both natural gas and liquefied gas. ‌Safety Control‌: Equipped with a forced ventilation system to ensure combustion stability‌‌. Application scenarios: It is widely used in industrial equipment heating, hot water supply and other scenarios, and needs to be coordinated with professional installation and debugging to ensure efficient operation. Categories:Branded burners Riello

Riello gas burner BS4 (20024335)

Riello gas burner BS4 (20024335) BS4 is a single-stage fire gas burner designed by Riello for small and medium-sized gas boilers and industrial heating equipment. Applicable fuels: natural gas (G20/G25), liquefied petroleum gas (LPG), suitable for gas pressure range of 20-100 mbar. Power supply: single-phase 230V/50Hz, motor power 530W, start current 3A. Control box: The RMG88.620A2 microprocessor control box is standard, supporting fault diagnosis (LED status display) and status memory functions. Stable operation through single-stage fire mode is suitable for scenarios with low load regulation requirements (such as small steam boilers and hot air furnaces). Core functions and technologies Combustion control Single-segment fire mode: maintain constant power output through temperature control signals, suitable for scenarios with high requirements for temperature stability (such as food processing, textile printing and dyeing) Safety and reliability Multiple protection: equipped with ionized flame detection, air pressure switch, overheating protection and gas leakage detection. Combustion technology Air-class combustion: Dynamically regulate air-fuel ratio through servo motors, NOx emissions as low as 50 mg/kWh (natural gas) Application scenarios Industrial field: Suitable for small and medium-sized steam boilers, thermal oil furnaces, drying equipment, etc., and is widely used in food processing, textile printing and dyeing, chemical industry and other industries. Categories:Branded burners Riello

Riello gas burner GS5

Riello gas burner GS5 Riello GS5 is an industrial burner produced by RIELLO, Italy, and is mainly used in the industrial field and is suitable for the hot pot industry. Fuel type: gas (natural gas/liquefied gas, etc.) Output power: 18-58 kW (15.5-49.9 Mcal/h), stable operation through single-stage fire mode, suitable for scenarios with low load regulation requirements (such as small steam boilers, hot air furnaces). Gas consumption: Based on natural gas with a net calorific value of 8-12 kWh/m³, the maximum gas consumption is about 5.8 m³/h. Power supply: single-phase 230V/50Hz, motor power 110W, start current 1.5A. Control box: The MG557 microprocessor control box is standard, supporting fault diagnosis (LED status display) and status memory functions. Functional Features ‌Intelligent Control‌: Equipped with combustion controller, flame detector, servo motor and other components to realize automatic ignition, flame monitoring and combustion parameter adjustment. ‌ ‌Safety Protection: It has protection devices such as air pressure switches, differential pressure switches, etc. to ensure operational stability. Safety and reliability Multiple protection: equipped with ionized flame detection, air pressure switch, overheating protection and gas leakage detection. Application scenarios Industrial field: Suitable for small and medium-sized steam boilers, thermal oil furnaces, drying equipment, etc., and is widely used in food processing, textile printing and dyeing, chemical industry and other industries. Categories:Branded burners Riello

Riello light oil burner P300T.G

Riello light oil burner P300T.G P300T/G is a diesel burner that adopts a three-section fire design and has proportional adjustment function. It is suitable for industrial equipment heating, boiler and other scenarios. Power output: 712kW of first-segment fire, 1779kW of second-segment fire, and up to 3560kW of third-segment fire. ‌Fuel flow rate‌: Fuel viscosity at 20℃ 4-6mm²/s (cSt), 60kg/h of the first section of fire, 150kg/h of the second section of fire, 300kg/h of the third section of fire. ‌Motor power‌: 7.5kW. Power supply: three-phase 380-400V/50Hz, motor power 10 kW, start current 29.1-16.8A, adapted to industrial power grid. Control box: A microprocessor control box is standard, supporting LED status display, fault diagnosis and safety locking functions. Core functions and technologies Combustion control Three-stage fire mode: Automatically switch the output force through the boiler temperature control signal (low - medium - high), suitable for load fluctuations but predictable scenarios (such as steam boilers, thermal oil furnaces) Safety and reliability Multiple protection: equipped with ionized flame detection, air pressure switch, overheating protection and fuel leakage detection, comply with the EU 90/396/EEC Gas Directive (Fuel Version Equivalent Standard) Combustion technology Air-class combustion: Dynamically regulate air-fuel ratio through servo motors, NOx emissions as low as 120 mg/kWh (heavy oil) Applicable scenarios: Suitable for industrial heating equipment, boilers, ovens and other industrial scenarios that require high-power combustion. Categories:Branded burners Riello

Riello Light oil burner RG4S

Riello Light oil burner RG4S RG4S is a single-stage fire light oil burner of Riello's GULLIVER RG series. It is specially designed for small and medium-sized boilers and is suitable for heating needs in the home, commercial and light industry fields. Output power: 118.5-237 kW (corresponding to fuel flow rate 10-20 kg/h), covering medium-sized heating demand. Fuel type: light oil (diesel), some models support fuel‌. Power supply requirements: single-phase 230V/50Hz, total power consumption 0.39 kW, motor power 0.39 kW, start current 8.5 A. Functional Features Single-stage fire control technology: stable combustion is achieved through simple proportional adjustment, suitable for industrial boilers, smelting equipment and other scenarios. ‌Structure: Integrated design, easy to install and maintain. ‌Safety Performance‌: Comply with industrial equipment safety standards, providing air supply pressure regulation (5kPa) and fuel consumption control (20kg/h) functions ‌. Applicable scenarios Suitable for industrial fields such as mechanical equipment, casting machinery, smelting equipment, etc., supporting the stable operation of fuel combustion systems. Categories:Branded burners Riello

Riello fuel oil burner RL34

Riello fuel oil burner RL34 RL34 is a dual-section fire burner of Riello's RL series. It is specially designed for small and medium-sized boilers and is suitable for heating needs in the home, commercial and light industry fields. Its core advantage lies in intelligent adjustment of two-section fire, low noise operation, high reliability and convenient maintenance. Output power: 154-395 kW (corresponding to fuel flow rate 13-33.6 kg/h), covering medium-sized heating demand. Fuel type: Light oil (diesel), some models support fuel. Power supply specifications: single-phase 230V/50/60 Hz, total power consumption 0.6 kW, motor power 0.3 kW, start current 2.4 A. Core functions and technical features Intelligent adjustment of two sections of fire, flexible matching of needs Dual-segment power switching: mechanically adjust the pressure of the damper and fuel pump, realize automatic switching between low fire (low power) and large fire (high power) to adapt to Low noise design, suitable for sensitive environments Compact structure: The overall size is small (weight about 30 kg), the installation space requirement is small, and it can quickly adapt to mainstream small and medium-sized boiler models. Efficient combustion and environmental protection performance Combustion efficiency: up to over 90%, reducing unburned fuel waste by optimizing the mixing ratio of fuel atomization (60° nozzle) with air. Safety protection and convenient maintenance Multiple security mechanisms: Flame monitoring: The photoresistor detects the flame state in real time, and the fuel supply will be cut off within 1 second when abnormal. Installation flexibility and compatibility Two-stage flange interface: supports seamless connection with the boiler combustion chamber, and provides electrical wiring diagrams for easy operation by professionals. Application scenarios‌ ‌Industrial fields‌: drying rooms, spraying equipment, hot air furnaces, etc. Categories:Branded burners Riello

Riello Fuel oil burner RL70

Riello Fuel oil burner RL70 RL70 is a dual-section fire fuel burner. It belongs to the Italian Riello brand product. It is mainly used to provide stable thermal energy in industrial equipment. It is specially designed for medium and large heating systems. It is suitable for hot water boilers, steam boilers and thermal oil furnaces and other scenarios. Its core advantage lies in the intelligent adjustment of two-section fires, efficient combustion, low-noise operation and convenient maintenance. Output power: Two-section fire model (RL70): 255-830 kW (corresponding to fuel flow rate 21.5-70 kg/h), covering medium and large heating needs. Proportional adjustment model (RL70/M): 261-1043 kW (fuel flow 22-88 kg/h), supporting more refined power adjustment. Fuel type: Fuel‌: Supports fuel (such as diesel) or gas (such as natural gas) Power supply specifications: Two-stage fire model: three-phase 380V/50Hz, motor power 1.1 kW, operating current 4.8-2.8 A. Proportional adjustment model: three-phase 380V/50Hz, total power consumption 1.4 kW, support 230V power supply (wiring adjustment is required). Core functions: intelligent adjustment of two-stage fire, flexible matching of load, efficient combustion and environmental protection performance, low noise design, adapt to sensitive environments, safety protection and convenient maintenance, installation flexibility and compatibility. Application scenarios‌ ‌Industrial fields‌: Large hot water/steam boilers, hot air generators, drying equipment, etc. ‌Extended Accessories‌: Supports the installation of probes, control systems, etc. to achieve diversified working modes‌. Categories:Branded burners Riello

Riello oil and gas dual-purpose burner RLS28

Riello oil and gas dual-purpose burner RLS28 RLS28 is a dual-purpose oil and gas burner produced by Riello. It belongs to the RLS series and is suitable for industrial boilers and thermal equipment. Fuel type: supports light oil (diesel) and gas dual fuels, and achieves flexible conversion through switching valves. Adjustment method: The standard model is two-stage fire control, and the proportional adjustment module can be optionally equipped. Output power: Light oil mode: 163-325 kW (fuel flow rate 14-25 kg/h) Natural gas mode: 163-325 kW (gas flow 15-30 Nm³/h) Fuel type: Light oil: 20℃ viscosity 4-6 mm²/s low sulfur diesel Gas: Natural gas (G20/G25), Liquefied petroleum gas (LPG) Power supply specifications: Single-phase model: 230V/50Hz, total power consumption 0.53 kW, motor power 0.25 kW Three-phase model: 230-400V/50Hz, total power consumption 0.76 kW, motor power 0.12 kW Functional Features ‌Dual Fuel Compatibility‌: Switch fuel/gas mode without changing the burner, reducing equipment modification costs‌. ‌Low-emission design‌: Optimize combustion chamber structure and comply with industrial environmental protection standards‌. ‌Compact structure‌: suitable for a variety of boiler types (hot water, steam, thermal oil furnace, etc.)‌ Application scenarios‌ ‌Industrial fields‌: small and medium-sized boilers, hot air generators, drying equipment, etc. ‌Extended Accessories‌: Supports the installation of probes, control systems, etc. to achieve remote monitoring‌. Categories:Branded burners Riello

Riello dual-fuel oil and gas burner RLS38

Riello dual-fuel oil and gas burner RLS38 RLS38 is a dual-purpose oil and gas burner produced by Riello. It belongs to the RLS series and is suitable for industrial boilers and thermal equipment. ‌Fuel type‌: Supports light oil (diesel) and gas dual fuels, and achieves flexible conversion by switching valves‌. Adjustment method: The standard model is two-stage fire control, and a proportional adjustment module can be optionally equipped. Output power: Light oil mode: 232-440 kW (fuel flow rate 20-37 kg/h) Natural gas mode: 105-232 kW (gas flow rate 10-22 Nm³/h) Fuel type: Light oil: 20℃ low sulfur diesel with viscosity 4-6 mm²/s (compliant with EN 14214) Gas: Natural gas (G20/G25), Liquefied petroleum gas (LPG) Power supply specifications: Single-phase model: 230V/50Hz, total power consumption 0.53 kW, motor power 0.25 kW Three-phase model: 230-400V/50Hz, total power consumption 0.76 kW, motor power 0.12 kW Core functions ‌Fuel adaptability‌: supports two fuels: gas and oil, and is suitable for industrial equipment such as boilers and can be flexibly switched and used. Control method: Use proportional adjustment technology to accurately control the combustion intensity and meet the needs of different working conditions. ‌Safety Design‌: Equipped with flame detectors, pressure switches and other safety devices to ensure operational stability and safety. Scope of application: It is mainly used in industrial fields (such as boilers, thermal energy equipment), has a two-stage fire regulation function, and can adapt to low nitrogen emission requirements. Categories:Branded burners Riello

Riello gas burner RS50

Riello gas burner RS50 RS50 is a second-stage fire gas burner produced by Riello. It belongs to the RS series and is suitable for industrial boilers and thermal equipment. Output power: Light oil mode: 116-290 kW (fuel flow rate 10-25 kg/h) Natural gas mode: 80-630 kW (gas flow 8.5-58 Nm³/h) Adjustment method: Two sections of fire (small fire/high fire automatic switching), optional PID ratio adjuster can be upgraded to proportional adjustment mode. Fuel type: Light oil: 20℃ low sulfur diesel with viscosity 4-6 mm²/s (compliant with EN 14214) Gas: Natural gas (G20/G25), Liquefied petroleum gas (LPG) Power supply specifications: Three-phase model: 380V/50Hz, total power consumption 0.75 kW, motor power 0.65 kW. Functional Features ‌Efficient combustion‌: The second-stage fire combustion technology can adjust heat output according to actual needs and improve energy utilization efficiency‌. ‌Safety Design‌: Equipped with safety devices such as flame detectors, microelectronic control boxes, etc., to monitor combustion status in real time ‌. ‌Low Noise Emissions‌: Reduce operating noise by optimizing fan design and sound insulation material applications ‌. ‌Flexible maintenance‌: Compact structural design, easy to install and maintain, adapted to boilers, heat treatment furnaces and other equipment. ‌ Applicable scenarios Suitable for hot water/superheated water boilers, thermal oil furnaces, industrial drying equipment and other scenarios, it supports smooth transition of two-stage fire adjustment to ensure efficient operation of each working point. Categories:Branded burners Riello

Riello gas burner RS130

Riello gas burner RS130 RS 130 is a two-stage fire gas burner, suitable for hot water boilers, hot air generators or steam boilers and other equipment. The maximum output power can reach 1512 kW. Its core functions revolve around efficient combustion, stable operation and environmental protection and energy saving. Fuel type: natural gas/liquefied gas. Main functions ‌Two-stage fire adjustment‌: Supports high/low two-stage fire power switching, adapts to different load requirements, and improves combustion efficiency‌. ‌Intelligent control system‌: Equipped with an electronic display screen that can monitor operating hours, ignition times and fault information in real time‌. ‌Low noise design‌: Using forward-inclined blade fans and sound insulation materials to significantly reduce operating noise‌. ‌Multi-fuel compatibility‌: Supports natural gas (G20/G25) and liquefied gas (LPG), and some models can be expanded to use both oil and gas‌. Combustion stability and furnace suitability The patented design of the combustion head can flexibly adjust the flame shape to adapt to different furnace sizes and back pressure environments. For example, in steam boilers, its flame length and diffusion angle can be mechanically adjusted to achieve optimal heat transfer efficiency. Safety and reliability Multiple protection mechanisms: Equipped with air pressure switch, gas pressure monitoring, flame ion probe, etc. to ensure that the fuel supply is automatically cut off when ignition fails or operation is abnormal. Scope of application It is suitable for thermal energy equipment such as industrial boilers and thermal oil furnaces, and supports gas single fuel or oil and gas dual-use modes. Categories:Branded burners Riello

Riello gas burner RS410-M BLU

Riello gas burner RS410-M BLU RS410-M BLU is a proportional gas burner launched by RIELLO of Italy. It is a model in the RS series that supports electronic proportional control and is specially designed for industrial scenarios that require precise temperature control. Main functions ‌Proportional adjustment technology‌ The gas/air ratio is dynamically adjusted through an electronic servo motor (such as SQN90.240B2793 or LKS210-21 model), and the output power can be adjusted linearly to adapt to different load requirements. ‌Intelligent control system‌ Equipped with an electronic instrument controller (such as REC 27/37 model), it supports fault code display, operating status monitoring and parameter programming. The burner working data can be viewed in real time through the LCD screen. ‌Multi-fuel compatibility‌ Supports natural gas (G20/G25) and liquefied gas (LPG). Some models can be expanded to be used for both oil and gas. They need to be used with a special pressure reducing valve. Power supply: three-phase 400V/50Hz. ‌Actuator type‌: The BLU version uses Riello’s special servo motor to support precise control of the damper‌. Application scenarios It is suitable for steam boilers, hot blast stoves and other equipment, especially for industries that require stable heat sources such as food processing and textile drying. Categories:Branded burners Riello

Ecoflam max gas series burners

Ecoflam max gas series burners Ecoflam max gas series burners are high-efficiency gas combustion equipment designed for small and medium-sized industrial and commercial heating systems, covering the power range from 49 kW to 7500 kW, with flexible adjustment methods, low emission characteristics and reliable safety protection mechanisms. MAX GAS 350.2 LN P TL Power range: 150-350 kW, suitable for small and medium-sized steam boilers, hot water boilers and hot blast furnaces. Adjustment method: two-stage fire adjustment (TL), high/low power switching through mechanical cam, fast response, suitable for scenarios with small load fluctuations. Fuel compatibility: Supports natural gas (G20/G25) and liquefied petroleum gas (LPG). The gas valve group adopts threaded or flange connection, with a maximum pressure of 500 mbar. Core functions: combustion stability, safety and reliability, installation and maintenance. MAX GAS 120 LN P TL Adjustment method: two-stage fire adjustment (TL), high and low power switching is achieved through a mechanical cam, with simple structure and low cost. Fuel compatibility: supports natural gas and liquefied petroleum gas, and the gas valve set adopts threaded connection, suitable for low-pressure gas supply systems. Core functions: efficient combustion, intelligent control, low emission performance. MAX GAS 350.2 LN P TM Power range: 150-350 kW, mid-to-high-end model, suitable for industrial scenarios that require high energy efficiency and adjustment accuracy. Adjustment method: Proportional adjustment (TM), which achieves a 5:1 adjustment ratio through the servo motor and PID logic regulator, optimizes the air-fuel ratio in real time according to the load, and reduces energy consumption. Fuel compatibility: supports natural gas and liquefied petroleum gas, and the gas valve group can be adapted to high-pressure gas supply systems (max. 500 mbar). Core functions: precise combustion control, low nitrogen optimization, intelligent expansion. MAX GAS 700: It is a large industrial burner and is suitable for ultra-large steam boilers, thermal oil furnaces and power stations. Adjustment method: Proportional adjustment (P), achieving a 5:1 adjustment ratio through servo motor and electronic cam, supporting combination with FGR technology to meet ultra-low emission requirements. Fuel compatibility: Supports natural gas and liquefied petroleum gas. The gas valve group adopts flange connection and is suitable for high-pressure gas supply systems. Core functions: efficient combustion and low emissions, furnace adaptability, intelligent control and diagnosis.