Olympia oil burner OM-4N

Olympia oil burner OM-4N OM-4N：It has the characteristics of high efficiency, stability, environmental protection, etc., and is suitable for a variety of thermal equipment. Fuel type: Light diesel. Structure: Usually a gun-type structure, which can be installed horizontally or vertically. Control method: Fully automatic single-segment or double-segment type is available. Output heat: approximately 200,000 - 400,000kcal/h. Fuel consumption: about 20 - 40L/h. Motor power: approximately 0.4kW. Power supply: Generally, AC220V/50Hz. Main functions: fully automatic operation, high safety performance, strong adaptability, convenient maintenance, good environmental protection performance.

Baltur gas burner TBG 85 ME

Baltur gas burner TBG 85 ME TBG 85 ME:It is a gas industrial burner that uses electronic proportional adjustment technology and has the characteristics of high combustion efficiency, accurate adjustment, safety and reliability. It is suitable for various heating equipment. Fuel type: Gas. Adjustment method: Electronic proportional adjustment method. Control components: An electronic program controller is used to directly control the supply of fuel and combustion air through two servo motors. Scope of application: Various heating equipment. Functions: Accurately adjust fuel and air volume, optimize combustion quality, simplify debugging process, ensure operational safety, and facilitate maintenance.

Riello gas burner G40 FS10(3756435)

Riello gas burner G40 FS10(3756435) The burner pays special attention to reducing operating noise, has the characteristics of easy installation and adjustment, small appearance, and can be adapted to a variety of boilers on the market. Power: 42-116kW, heat output is about 36,000-100,000kcal/h. Fuel: Mainly natural gas, the minimum pressure of natural gas is 16 mbar and the maximum is 100 mbar. Power supply: single phase, 230V±10%, 50Hz. Motor current: 0.7A. Control box model: RMG88.620A2. Ignition transformer: primary 230V/1.8A, secondary 8kV/30mA. Electrical protection level: IPX0D (equivalent to IP40). External dimensions: approximately 305×262×346mm. Features Stable combustion: With a single-stage flame combustion control method, it can achieve stable combustion and provide continuous and stable heat for boilers, hot blast stoves and other equipment, meeting their heating requirements. Good compatibility: Using natural gas as fuel, it is suitable for various equipment powered by natural gas and can adapt to a certain range of gas pressure, typically between 18mbar and 360mbar. Safe and reliable: It complies with multiple regulations such as 90/396/EEC and 89/336/EEC, as well as EN676 standards, and has obtained CE certification. The electrical protection level is IPX0D, providing a certain level of electrical safety protection and ensuring the safety of equipment operation to a certain extent. Easy to install: It is compact in size with a relatively compact overall dimension, making installation and disassembly convenient, facilitating on-site installation and maintenance.

Riello oil burner RL190 (20216642)

Riello oil burner RL190 (20216642) The RL190 burner is an integrated structure, using mechanical pressure atomization. It can be adapted to various types of combustion chambers and is suitable for commercial and industrial equipment such as hot water boilers and steam boilers, providing stable heat output. Fuel: Usually light oil, such as diesel or kerosene. Motor power: Approximately 1.1kW. Power supply: Generally three-phase, 380V ± 10%, 50Hz. Maximum fuel flow rate: Approximately 19kg/h. Combustion air volume: Varies with load, with a maximum air flow rate of approximately 250m³/h. Overall dimensions: Approximately 560×400×470mm in length × width × height. Functional features: Combustion control, safety protection, high efficiency and energy saving, easy installation, and stable operation.

Riello natural gas burner RS 68/M BLU (20207611)

Riello natural gas burner RS 68/M BLU (20207611) RS 68/M BLU is an integral civil gas burner that adopts proportional combustion control method, suitable for steam furnaces, water hot furnaces and other equipment, and has the characteristics of low nitrogen emissions. Fuel: Natural gas. Catalog: about 600,000 calories. Air supply pressure: 5kpa. Fuel consumption: about 70m³/h. Protection level: IP40. Functional features: accurate combustion adjustment, low nitrogen emissions and environmentally friendly, safe and reliable operation, easy installation and maintenance, and intelligent fault diagnosis.

Riello gas Burner RS70-M （20195818）

Riello gas Burner RS70-M （20195818） The RS70-M is a forced ventilation gas burner suitable for hot water or superheated water boilers, hot air generators, steam boilers and thermal oil furnaces, etc. It adopts a smooth two-stage flame adjustment method and is equipped with a microelectronic control box that can diagnose the operating status and fault causes. The performance of its fan and burner head has been optimized, making it widely applicable and ensuring high combustion efficiency at various operating points. It has a compact size, facilitating installation and maintenance. Heat output: 150 - 930kW, approximately 130 - 800Mcal/h. Adjustment ratio: The adjustment ratio can reach 6:1 at maximum output. Servo motor: Model SQN90, with a running time of 24 seconds. Features: Combustion adjustment: The default operation mode is smooth two-stage flame, and it can also achieve proportional adjustment mode after installing a PID ratio controller and corresponding probes, allowing flexible adjustment of heat output according to actual needs to meet different load requirements. High efficiency and energy saving: By optimizing the performance of the fan and burner head, it ensures high combustion efficiency at all operating points, reducing fuel consumption and operating costs. Safe and reliable: The design complies with multiple European technical standards such as EN676 and EN12100, and meets the requirements of the MD 2006/42/EC Machinery Directive, LVD 2006/95/EC Low Voltage Directive, and EMC 2004/108/EC Electromagnetic Compatibility Directive. It has multiple safety protection functions and operates stably and reliably. Fault diagnosis: Equipped with a microelectronic control box, it can provide diagnosis of the burner's operating status and fault causes, facilitating quick troubleshooting and problem-solving for maintenance personnel. Easy installation: With a compact size and a variety of optional accessories, it offers flexible installation and is easy to maintain, meeting the needs of different installation scenarios. Additionally, the burner has a protection rating of IP40, making it suitable for a range of usage environments.

Riello gas Burner RS100-M （3789710）

Riello gas Burner RS100-M （3789710） RS100-M ：It is a forced ventilation gas burner, suitable for steam boilers, hot water boilers, thermal oil boilers and other equipment. The burner adjustment method is to smoothly transition two-stage fire, and proportional adjustment can also be achieved by installing a PID regulator and an auxiliary probe. It is equipped with a microelectronic control box that diagnoses operating status and causes of failure. The fan uses forward-tilt blades, sound insulation materials are installed at the air inlet, and the performance of the combustion head has been optimized, which not only has low noise, but also increases the scope of application. At the same time, the appearance is small, which is convenient for use and maintenance. Power: The smaller power output is 232kW, and the second-stage fire power output is 1163kW. Gas flow: The smaller gas flow is 23m³/h, and the second-stage fire gas flow is 116m³/h. Motor rated power: 1.8kW. Power supply: 3-phase 380V, 50Hz. Functional features: flexible combustion adjustment, efficient and energy-saving, safe and reliable operation, convenient fault diagnosis, convenient installation and maintenance, and low noise.

Riello gas burner RS310-M MZ +Gas Valve group CB50/1(3970146)

The RS310-M MZ burner has a large output range and is suitable for heating boilers, thermal oil boilers, steam generators and other equipment. It adopts an integral design, compact structure and small size, which is convenient for installation and maintenance. It can be opened on the left or right side to facilitate inspection of internal components. Power: The power range is approximately 600-3900kW. Fuel: Suitable for natural gas, including G20, G21, G22, G23, G25 and other types. Gas pressure: At maximum output, the G20 natural gas pressure is 33.2mbar and the G25 natural gas pressure is 49.5mbar. Power supply: The main power supply is 3N~400V±10%, 50Hz. Fan motor: power is about 7.5kW, speed is 2900rpm, voltage is 230/400V, current is 23.9/13.8A. Ignition transformer: voltage 230V - 1x8kV, current 1A - 20mA. Protection level: IP54. Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and convenient installation and maintenance.

Riello burner RLS 120-M MX

Riello burner RLS 120-M MX RLS 120-M MX：It is a low-nitrogen-regulated oil and gas dual-purpose burner, suitable for medium and low temperature hot water boilers, hot air boilers, steam boilers and thermal oil boilers and other equipment. The burner is uniquely designed, small in size, easy to use and maintain, and is equipped with a variety of accessories for high working flexibility. The noise emission is optimized through the special design of the suction circuit and the use of sound insulation materials. Thermal output: range is 300-1200kW. Operation mode: The oil side is two sections of fire running, and the proportional adjustment can be achieved on the air side after installing the PID logic regulator and the corresponding probe. Power supply: usually three-phase, voltage is 230-400V, frequency is 50Hz. Rated fan motor current: 5.9-3.4A. Fan motor power: 1.5kW. Pump motor power: 0.55kW. Pump conveyance: 230kg/h at 12bar pressure. Protection level: IP44. Control box type: LFL1.333 (FS1) - LGK16 (FS2). Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and easy installation and maintenance.

Riello gas burner RS45-E

Riello gas burner RS45-E The RS45-E burner is in a fire operation mode, with protection level IP40. Its structure is compact and equipped with a damper servo motor, which can adjust the combustion air to ensure combustion efficiency. Burner output: 160-330kW, or 137,600-283,800kcal/h. Gas pressure: minimum 20mbar, maximum 100mbar. Power supply: single phase, 230V±10%, 50Hz. Motor running current: 2A, speed 2750rpm. Ignition transformer: primary 230V/0.2A, secondary 8kV/12mA. Electric power consumption: 0.43kW. Functional Features: Efficient combustion: The air volume is accurately controlled through the damper servo motor, so that the gas and air are fully mixed, and efficient combustion can be achieved, which can reduce fuel consumption and operating costs. Safety and reliable: complies with many European standards such as EMC 89/336/EEC, low voltage 73/23/EEC, and is equipped with safety devices such as pressure switches, which can monitor combustion status in real time and ensure safe operation. Easy to install: The burner has an adjustable combustion head length, and the connecting wires of the gas valve group can enter the burner from the left or right, making it easy to install and wiring.

Riello gas burner RS50-M

Riello gas burner RS50-M The RS50-M is a gas burner with a smooth transition of two-stage fires. It can also be adjusted proportionally by adding a PID regulator and a probe. The burner uses an integral cast aluminum shell, which has a compact structure and a small exterior size, making it easy to use and maintain. Its fan has a special pressure resistant structure, which allows the burner to operate safely on semi-positive and positive pressure boilers. The combustion head has a sliding connection flange, which allows the installer to install it in the appropriate position of the furnace. Catalog: about 500,000 calories/h. Scope of application: boiler, hot air furnace, heat treatment. Fuel: Gas. Air supply pressure: approximately 0.01MPa. Fuel consumption: about 20kg/h. Control method: proportional adjustment method. Protection level: IP40. Functional features: flexible combustion adjustment, high efficiency and energy saving, safe and reliable, low noise, and easy installation and maintenance.

Baltur gas burner TBG 60 P + Gas Valve group MB-DLE 415 B01 S20

TBG 60 P is a dual-section fire gas burner suitable for boilers, hot air furnaces and other equipment. MB-DLE 415 B01 S20 is its supporting gas valve set and other components. The burner uses lightweight die-cast aluminum alloy fan parts and is equipped with a high-performance centrifugal fan. The combustion head is a steel adjustable structure with stainless steel nozzles and flame diffusion discs. It is connected and fixed with the boiler through flange and insulating sealing ring, and has good thermal insulation and sealing. Power: 120-600kW. Natural gas flow: 12-60kg/h. Motor power: 0.75kW. Weight: about 42kg. Dimensions: approximately 970×570×480mm. Electrical protection level: IP44. Functional features: flexible combustion regulation, high efficiency and energy saving, low nitrogen emissions, safe and reliable, and convenient maintenance.

Ecoflam low nitrogen burner MAX GAS 350.2 LN P TM(3147268)

Ecoflam low nitrogen burner MAX GAS 350.2 LN P TM(3147268) MAX GAS 350.2 LN P TM is a MAX GAS series of low nitrogen burners suitable for a wide range of gases. The Ecoflam MAX GAS series burners are known for their high efficiency and reliable operation. They can help users save energy and reduce emissions, are easy to install and easy to maintain, and can be flexibly matched with boilers. Low nitrogen emission level: Level 3. Power consumption: 0.3/0.55/0.75kW. Suitable fuels: natural gas, liquefied gas, etc. Power supply: Can operate at a power supply of 50-60Hz. Main functions: efficient combustion, flame detection, convenient maintenance, strong fuel adaptability, safety protection, low nitrogen environmental protection.

Maxon burning head MODEL 400 (EB3)

Maxon burning head MODEL 400 (EB3) The MODEL 400 is a gas burner for industrial use, with a compact design for quick and easy installation, and simple on-site adjustment and maintenance. Thermal power can reach 4835kW/h, which can meet the large heat demand. In addition, the required fuel pressure is low and suitable for a variety of clean gases. Main functions: clean combustion, strong fuel adaptability, stable combustion, reliable driving.

Eclipse refractory brick burner TJ0300

Eclipse refractory brick burner TJ0300 Model: TJ0300. Fuel type: Available fuels include natural gas, liquefied petroleum gas or diesel, etc. Power range: The power output range is from 37,500 kcal/h to 2,500,000 kcal/h. Some sources indicate that it is a 600,000 kcal burner. Power regulation ratio: The power regulation ratio is 50:1. Applicable temperature: The maximum furnace temperature can reach 1530°C. Application fields: It is commonly used in industrial fields such as metal annealing furnaces, metal melting furnaces, incinerators, small glass kilns, ceramic kilns and fluidized bed dryers. Functions: High-efficiency combustion function, high flow rate heating function, wide ratio regulation function, preheated air adaptation function, low emission environmental protection function, and stable combustion function.