Burners
Contact us
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
RIELLO gas burner RS 45 BLU The RS 45 BLU is a forced ventilated integrated gas burner. Adjustment method: The default adjustment method is "smooth two-section fire". You can also implement the "proportional adjustment" mode after installing the PID ratio adjuster and the corresponding probe to meet the needs of different working conditions. Servo system: SQM series servo motor is standard, and the adjustment accuracy is ±1°. Structural design: The unique design ensures that the equipment is compact, simple to use, easy to maintain, and complete all kinds of accessories, ensuring work flexibility. Functions: efficient combustion, safe protection, low noise operation, flexible control.
Bentone gas burner BG400M Bentone brand industrial-grade gas burners adopt dual-section fire control technology and are specially designed for medium-sized thermal energy equipment such as boilers and hot air furnaces. Heat output: 270,000 kcal/hour (about 318kW), covering medium-sized industrial heating needs. Fuel type: adapted to natural gas/LPG, gas supply pressure of 0.2MPa. Control method: Supports single-segment/double-segment/proportional adjustment mode switching. Motor configuration: 230V/50Hz/250W asynchronous motor drive. Fuel interface: supports gas access on both sides of the left/right, equipped with a slow-opening solenoid valve and a dual-valve group design to ensure safe opening and closing. Functions: Multi-fuel compatibility and efficient combustion, intelligent control and safety protection, modular design and maintenance convenience.
RIELLO light oil burner R40 G3
RIELLO light oil burner R40 G3 R40 G3 is a single-stage light oil burner specially designed for small and medium-sized boilers and heating equipment, mainly used for efficient combustion of diesel. Electrical characteristics: single-phase power supply (1N), voltage 220V/50Hz, motor rated power 0.09kW. Power supply specifications: single-phase 230V±10%, 50Hz, starter capacitor 4μF, total power consumption ≤0.115kW. Oil pump performance: The maximum pressure of the gear pump is 14bar, the flow rate is 3.5L/h (at 10bar), and it must be equipped with a 30μm fuel filter. Protection level: IP40 dust-proof design can resist dust pollution in the boiler room, but it is necessary to avoid long-term exposure to environments with humidity ≥90%. Core functions: combustion control and safety protection, efficient combustion and adaptability, compact modular structure, high-temperature resistant materials.
RIELLO light oil burner R40 G5
RIELLO light oil burner R40 G5 The R40 G5 is a single-stage light oil burner specifically designed for small and medium-sized heating equipment, mainly used for efficient combustion of diesel, light diesel oil (LDO), and biodiesel. Power supply specification: Single-phase 230V ± 10%, 50Hz, starting capacitor 4μF, total power consumption ≤ 0.115kW. Oil pump performance: The gear pump has a maximum pressure of 14bar and a flow rate of 3.5L/h (at 10bar), and it is recommended to be used with a 30μm fuel filter. High-temperature resistant materials: The flame tube is made of stainless steel 316L and coated with a ceramic-based coating (0.3-0.5mm thick), capable of withstanding continuous high temperatures up to 1100℃, with a lifespan of ≥ 6000 hours. Protection grade: IP40 dust-proof design. Core functions: Efficient combustion control, intelligent diagnosis and safety protection, wide compatibility.
Baltur gas burner BT30G BT30G is an industrial-grade gas combustion equipment. Single-section fire design, adapted to natural gas or liquefied gas. Gas pressure range is 2000-2800Pa, and consumption is 20-28m³/h. Core functions: one.Mixed Combustion Technology The air and gas are premixed in the combustion head, and combustion parameters can be optimized by adjusting the combustion air and the combustion head. two. Convenient maintenance design The burner can be removed directly without disassembly and installed with an ionizing electrode flame detection system. three.Operation control mode Single-section fire manually adjusts air flow. The progressive/proportional type uses a servo motor to synchronously control the gas and air supply, and automatically close the damper during suspension to reduce heat loss. Safety and protection: one. It comes standard with IP40 electrical protection level, plastic cover protection, and integrated sound silencer device at the air inlet. Two. Triple structure design (some models) enhances flame stability, and the duty torch prevents fire out.
RIELLO gas burner RS 410-M BLU+CBF65(3970147)
RIELLO gas burner RS 410-M BLU+CBF65(3970147) Category: Burner Bartour RS 410-M BLU with valve is a low-nitrogen gas burner specially designed for industrial heating equipment, with an integrated gas valve group, suitable for hot water boilers, steam boilers and thermal oil furnaces and other scenarios. Rated power is 500-4450 kW, covering the needs of medium and large industrial equipment. Voltage specifications: 3-phase 380V/50Hz. Suitable gas type: liquefied gas/natural gas. Pipe diameter size: DN65 Core functions one. Proportional adjustment function: By installing a ratio adjuster, stepless adjustment between small fire and large fire can be achieved, automatically adapting to different output needs, and maintaining the temperature or pressure stable. Two. Valve group configuration: Siemens valve group system is standard. three.Control mode: Supports single-segment fire operation mode. Application fields: boiler equipment (steam/hot water boiler), thermal oil furnace, industrial heating equipment, direct combustion lithium bromide air conditioning unit.
Eclipse burn mouth TJ0150 TJ0150 belongs to the ThermJet series nozzle hybrid burner. Type: Nozzle mixing design, high-speed hot air flow through combustion pipes. Gas velocity: high-speed (HV) and medium-speed (MV), reaching 150m/s and 75m/s respectively. Model: TJ0150 Fuel: natural gas, propane, butane Power range: 155,000 to 2,000,000 Btu/h (approximately 45 to 2,930 kW) Adjustment ratio: 50:1, adapting to wide load needs. combustion air temperature: up to 315℃ Performance Advantages Supports high-temperature preheating combustion-assisted air (up to 540℃), significantly improving system efficiency. High-speed airflow enhances temperature uniformity in the furnace and optimizes product quality. The process temperature can reach 1538℃, which is suitable for high-temperature industrial scenarios. Application scenarios Typically used in equipment such as tempering furnaces, reheating furnaces, fluidized bed dryers, etc., it is especially suitable for industrial heating scenarios that require high-precision temperature control.
Ecoflam burner MAX GAS 700 The MAX GAS 700 is a high-power gas burner designed for industrial boilers, hot air furnaces and process heating equipment. The burner adopts high-efficiency combustion technology and is suitable for gas types such as natural gas, liquefied gas (LPG), and has the characteristics of high regulation ratio, low emissions, and stable combustion. Core functions: combustion control, safety protection, energy efficiency optimization. Suitable for gas: Natural Gas/LPG. Adjustment method: Two-stage fire / proportional adjustment (optional) Control voltage: 230V AC / 24V DC Protection Level: IP40/IP54 (optional) Main features High power output: suitable for thermal load requirements of 700 kW and above. Multi-section fire/proportion adjustment: supports single-section, two-section or continuous proportional adjustment to adapt to different load needs. Low NOx emissions: Comply with environmental standards (such as EN 676 Class III) to reduce nitrogen oxide emissions. Modular design: easy to install, maintain and upgrade. Strong compatibility: It can be adapted to a variety of boiler and control systems (such as Siemens, Honeywell program controllers).
Olympia OM-0N Product model:Olympia OM-0N OM-0N is a diesel combustion engine, the basic model of the brand's new OM series fuel burners, which is mainly used in small and medium-sized thermal energy equipment, such as boilers, industrial heating systems, etc. Fuel type: Diesel is used as fuel, suitable for thermal energy conversion scenarios of industrial equipment. OM-0N is a single-stage fire (On-Off control) fuel burner, with an output power range of 3~7kW, suitable for a 220V voltage environment. Core functions: combustion control, fuel adaptability, safety mechanism, installation characteristics. Applicable scenarios: Suitable for industrial scenarios where stable thermal energy supply is required, such as heat treatment equipment, drying equipment, etc. Category: Burne
Olympia OM-1N Product model:Olympia OM-1N OM-1N is a mid-range model among the brand's OM series fuel burners, mainly aimed at small and medium-sized industrial heating equipment and civil heating systems. OM-1N is positioned as a single-stage fire (On-Off control) fuel burner, adapted to a 220V voltage environment. Power range: fuel consumption 5~10kg/h, corresponding output power is about 58~116kW. Structural design: It adopts a compact metal shell with a dimension of φ135×180mm and a weight of only 11kg, making it easy to install on a space-constrained boiler or heating equipment. Modular components: Key components such as fuel pumps, nozzles, ignition electrodes, etc. can be quickly disassembled and replaced, and the maintenance cost is low. Core functions: combustion control logic, fuel adaptability, safety mechanism, installation and operation characteristics.
Bentone gas burner BG400 Model: BG400-2 (double section fire design) The BG400 burner is an industrial dual-section fire gas burner produced by Bentone AB, Sweden. It is mainly used for the thermal energy supply of boilers, hot air furnaces and other equipment. Fuel Type: Natural Gas/LPG (LPG) Control method: Dual-segmental progressive (DSPGN), supports automatic switching between small fires/high fires. Functional Features Double-segment fire operation: The gas and air ratio is adjusted through the servo motor to achieve high/low load switching, with significant energy saving effect. Safety Protection: Equipped with flame detection (ion probe) and flameout protection (response time ≤5 seconds) Environmental Standard: Comply with European EN676 (gas) or EN267 (light oil) standards, and some models meet stricter emission requirements. Design Advantages Modular structure: components such as gas valve sets, program controllers (such as Landis & Staefa) can be quickly disassembled and maintained. Adapability: Supports various fuels such as urban gas, natural gas, etc., and the intake pressure needs to be adjusted according to actual needs (such as the maximum natural gas of 360mbar) Application scenarios: Equipment that requires stable heat sources such as industrial boilers, textile shaping machines, hot air furnaces.
Bentone gas burner BG 300 BG 300 is a gas combustion equipment designed for industrial and commercial scenarios, mainly used in industrial thermal energy equipment. The model is BG300, which supports single-segment fire operation; the BG300-2 is a dual-segment fire model, which can realize incremental switching of two thermal powers. Thermal power: 160,000 kcal/hour (about 186 kW), suitable for urban gas, natural gas and other fuels. Core Components: The flame disc (stable flame disc) is made of stainless steel to ensure that the air and fuel are fully mixed. STG146 ignition needle, ion rod and other accessories are optional. Functional Features: one.combustion control Double-segment fire model (BG300-2): Power switching is controlled by the servo motor, and the air/fuel ratio can be accurately adjusted to meet boiler requirements. Single-segment fire model: stable output of fixed thermal power, suitable for scenarios where power fluctuations are not high. two.Compatibility Supports a variety of gas types, including natural gas, liquefied gas, etc. three.Safety and reliability Multiple protection mechanism: equipped with VPS 504 SO 2 leak detection system, overpressure protection valve and safety shutoff valve in accordance with EN 1287 to ensure safe operation. Categories:Branded burners Bentone Keywords:BG 300
Bentone oil burner B30A BENTONE B30A is an industrial-grade burner produced by Bentone AB, Sweden. It is mainly used in fuel or gas combustion scenarios and has the characteristics of high efficiency and safety. Its main power supply is 230V, 1 phase, 50Hz, and a power of 281W. The fuel flow range of this burner is 6.0-17.0kg/h, and the output power is 72-200kW. Function: Multi-fuel adaptation It supports a variety of fuels such as light diesel, liquefied petroleum gas (LPG) and natural gas, and is suitable for industrial furnaces, low-temperature equipment and other scenarios. Efficient and Energy-saving Design Solenoid valves are used to combine the main valve and the safety valve to save installation space. The combustion is clean and low noise. Some models can be connected to combustion air through external pipes to adapt to dusty environments. Safety and convenience Built-in multiple safety valves ensure operational reliability. Standardized wiring plugs simplify the connection between power supply and control devices. Features: Adopt advanced combustion technology to ensure efficient combustion performance. Supports low temperature start-up and adapts to different climatic conditions. Equipped with safety protection devices to ensure operational stability. Applicable scenarios: Designed for industrial furnaces, it can withstand high temperature working environments. Supports LPG gas or fuel, suitable for low-temperature combustion scenarios. Categories:Branded burners Bentone
Baltur Gas burner TBG 60 P Product model:TBG TBG 60 P is a high-efficiency gas burner specially designed for industrial and commercial applications. It is suitable for boilers, hot air furnaces and other equipment, and has the characteristics of low emissions, easy maintenance and flexible adjustment. Output power: 120-600 kW, adjustment ratio is 1:4, and the combustion intensity can be flexibly adjusted according to actual needs. Fuel type: Natural gas (G20), with maximum/minimum gas flows of 60 Sm³/h and 12 Sm³/h, respectively. Power supply specifications: three-phase AC 400V±10%, 50Hz, motor power 0.75 kW, total system power consumption 0.96 kW. Core functions: Combustion regulation and control Two-stage operation: supports high/low fire mode, and precise adjustment is achieved through pneumatic drive valve sets to meet different load needs. Proportional adjustment extension: The combustion efficiency can be further optimized by additional installation of automatic modulation devices (such as RWF40) to upgrade to proportional adjustment mode. Air flow control: Manually adjust the combustion air chuck of the butterfly door, combined with the optimized design of the combustion head, ensure that the air and gas are fully mixed and reduce energy consumption. Safety and reliability Multiple security protection: Ion electrodes detect flames, monitor combustion status in real time, and prevent accidental shutdown. The gas valve group integrates safe pneumatic drive, minimum pressure switch, pressure regulator and filter to ensure stable gas supply and prevent leakage. The air pressure switch monitors the combustion-assisted air flow to avoid combustion abnormalities due to insufficient air volume. Categories:Branded burners Baltur
Baltur oil burner TBL45P Product model:TBL TBL45P is an oil-fired burner produced by Baltur, Italy. It belongs to the P series industrial burner. It is specially designed for boilers, thermal oil furnaces and other equipment. It is suitable for light diesel or heavy oil fuels. Its core features include two-stage fire regulation, low emission technology and modular maintenance design. Output power: 160-450 kW, adjustment ratio is 1:2.8, and the combustion intensity can be flexibly adjusted according to actual needs. Fuel type: Light oil (such as diesel), maximum viscosity 1.5°E. Power supply specifications: Single phase: 230V/50Hz, fan motor power is 0.65 kW, total power consumption is about 0.7 kW. Three-phase: 380V/60Hz, fan motor power is 0.6 kW, and the total power consumption is about 0.68 kW. Core functions: Combustion regulation and control Two-stage operation: supports high/low fire mode, and precise adjustment is achieved through pneumatic drive valve sets to meet different load needs. Air flow control: Manually adjust the combustion air chuck of the butterfly door, combine the hydraulic jack to optimize the air and fuel mixing ratio to improve combustion efficiency. Fuel supply system: Gear pumps with pressure adjustment, interceptor valve and safety valve to ensure stable oil supply and prevent leakage. Safety and reliability Multiple security protection: Photoresistor detects flames in real time to prevent accidental shutdown. The air pressure switch monitors the combustion-assisted air flow to avoid combustion abnormalities due to insufficient air volume. The fuel valve group integrates safe pneumatic drives and filters to ensure safe fuel supply. Categories:Branded burners Baltur
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China