Burners
Contact us
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction. FS1 and FS2 versions are available for intermittent and continuous operation applications. The exclusive design ensures reduced dimensions, simple use and maintenance. A wide range of accessories guarantees elevated working flexibility.
Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction
Riello gas burner G40 FS10(3756435)
Riello gas burner G40 FS10(3756435) The burner pays special attention to reducing operating noise, has the characteristics of easy installation and adjustment, small appearance, and can be adapted to a variety of boilers on the market. Power: 42-116kW, heat output is about 36,000-100,000kcal/h. Fuel: Mainly natural gas, the minimum pressure of natural gas is 16 mbar and the maximum is 100 mbar. Power supply: single phase, 230V±10%, 50Hz. Motor current: 0.7A. Control box model: RMG88.620A2. Ignition transformer: primary 230V/1.8A, secondary 8kV/30mA. Electrical protection level: IPX0D (equivalent to IP40). External dimensions: approximately 305×262×346mm. Features Stable combustion: With a single-stage flame combustion control method, it can achieve stable combustion and provide continuous and stable heat for boilers, hot blast stoves and other equipment, meeting their heating requirements. Good compatibility: Using natural gas as fuel, it is suitable for various equipment powered by natural gas and can adapt to a certain range of gas pressure, typically between 18mbar and 360mbar. Safe and reliable: It complies with multiple regulations such as 90/396/EEC and 89/336/EEC, as well as EN676 standards, and has obtained CE certification. The electrical protection level is IPX0D, providing a certain level of electrical safety protection and ensuring the safety of equipment operation to a certain extent. Easy to install: It is compact in size with a relatively compact overall dimension, making installation and disassembly convenient, facilitating on-site installation and maintenance.
Riello oil burner RL190 (20216642)
Riello oil burner RL190 (20216642) The RL190 burner is an integrated structure, using mechanical pressure atomization. It can be adapted to various types of combustion chambers and is suitable for commercial and industrial equipment such as hot water boilers and steam boilers, providing stable heat output. Fuel: Usually light oil, such as diesel or kerosene. Motor power: Approximately 1.1kW. Power supply: Generally three-phase, 380V ± 10%, 50Hz. Maximum fuel flow rate: Approximately 19kg/h. Combustion air volume: Varies with load, with a maximum air flow rate of approximately 250m³/h. Overall dimensions: Approximately 560×400×470mm in length × width × height. Functional features: Combustion control, safety protection, high efficiency and energy saving, easy installation, and stable operation.
Riello natural gas burner RS 68/M BLU (20207611)
Riello natural gas burner RS 68/M BLU (20207611) RS 68/M BLU is an integral civil gas burner that adopts proportional combustion control method, suitable for steam furnaces, water hot furnaces and other equipment, and has the characteristics of low nitrogen emissions. Fuel: Natural gas. Catalog: about 600,000 calories. Air supply pressure: 5kpa. Fuel consumption: about 70m³/h. Protection level: IP40. Functional features: accurate combustion adjustment, low nitrogen emissions and environmentally friendly, safe and reliable operation, easy installation and maintenance, and intelligent fault diagnosis.
Riello gas Burner RS70-M （20195818）
Riello gas Burner RS70-M （20195818） The RS70-M is a forced ventilation gas burner suitable for hot water or superheated water boilers, hot air generators, steam boilers and thermal oil furnaces, etc. It adopts a smooth two-stage flame adjustment method and is equipped with a microelectronic control box that can diagnose the operating status and fault causes. The performance of its fan and burner head has been optimized, making it widely applicable and ensuring high combustion efficiency at various operating points. It has a compact size, facilitating installation and maintenance. Heat output: 150 - 930kW, approximately 130 - 800Mcal/h. Adjustment ratio: The adjustment ratio can reach 6:1 at maximum output. Servo motor: Model SQN90, with a running time of 24 seconds. Features: Combustion adjustment: The default operation mode is smooth two-stage flame, and it can also achieve proportional adjustment mode after installing a PID ratio controller and corresponding probes, allowing flexible adjustment of heat output according to actual needs to meet different load requirements. High efficiency and energy saving: By optimizing the performance of the fan and burner head, it ensures high combustion efficiency at all operating points, reducing fuel consumption and operating costs. Safe and reliable: The design complies with multiple European technical standards such as EN676 and EN12100, and meets the requirements of the MD 2006/42/EC Machinery Directive, LVD 2006/95/EC Low Voltage Directive, and EMC 2004/108/EC Electromagnetic Compatibility Directive. It has multiple safety protection functions and operates stably and reliably. Fault diagnosis: Equipped with a microelectronic control box, it can provide diagnosis of the burner's operating status and fault causes, facilitating quick troubleshooting and problem-solving for maintenance personnel. Easy installation: With a compact size and a variety of optional accessories, it offers flexible installation and is easy to maintain, meeting the needs of different installation scenarios. Additionally, the burner has a protection rating of IP40, making it suitable for a range of usage environments.
Riello gas Burner RS100-M （3789710）
Riello gas Burner RS100-M （3789710） RS100-M ：It is a forced ventilation gas burner, suitable for steam boilers, hot water boilers, thermal oil boilers and other equipment. The burner adjustment method is to smoothly transition two-stage fire, and proportional adjustment can also be achieved by installing a PID regulator and an auxiliary probe. It is equipped with a microelectronic control box that diagnoses operating status and causes of failure. The fan uses forward-tilt blades, sound insulation materials are installed at the air inlet, and the performance of the combustion head has been optimized, which not only has low noise, but also increases the scope of application. At the same time, the appearance is small, which is convenient for use and maintenance. Power: The smaller power output is 232kW, and the second-stage fire power output is 1163kW. Gas flow: The smaller gas flow is 23m³/h, and the second-stage fire gas flow is 116m³/h. Motor rated power: 1.8kW. Power supply: 3-phase 380V, 50Hz. Functional features: flexible combustion adjustment, efficient and energy-saving, safe and reliable operation, convenient fault diagnosis, convenient installation and maintenance, and low noise.
Riello gas burner RS310-M MZ +Gas Valve group CB50/1(3970146)
The RS310-M MZ burner has a large output range and is suitable for heating boilers, thermal oil boilers, steam generators and other equipment. It adopts an integral design, compact structure and small size, which is convenient for installation and maintenance. It can be opened on the left or right side to facilitate inspection of internal components. Power: The power range is approximately 600-3900kW. Fuel: Suitable for natural gas, including G20, G21, G22, G23, G25 and other types. Gas pressure: At maximum output, the G20 natural gas pressure is 33.2mbar and the G25 natural gas pressure is 49.5mbar. Power supply: The main power supply is 3N~400V±10%, 50Hz. Fan motor: power is about 7.5kW, speed is 2900rpm, voltage is 230/400V, current is 23.9/13.8A. Ignition transformer: voltage 230V - 1x8kV, current 1A - 20mA. Protection level: IP54. Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and convenient installation and maintenance.
Riello burner RLS 120-M MX RLS 120-M MX：It is a low-nitrogen-regulated oil and gas dual-purpose burner, suitable for medium and low temperature hot water boilers, hot air boilers, steam boilers and thermal oil boilers and other equipment. The burner is uniquely designed, small in size, easy to use and maintain, and is equipped with a variety of accessories for high working flexibility. The noise emission is optimized through the special design of the suction circuit and the use of sound insulation materials. Thermal output: range is 300-1200kW. Operation mode: The oil side is two sections of fire running, and the proportional adjustment can be achieved on the air side after installing the PID logic regulator and the corresponding probe. Power supply: usually three-phase, voltage is 230-400V, frequency is 50Hz. Rated fan motor current: 5.9-3.4A. Fan motor power: 1.5kW. Pump motor power: 0.55kW. Pump conveyance: 230kg/h at 12bar pressure. Protection level: IP44. Control box type: LFL1.333 (FS1) - LGK16 (FS2). Functional features: flexible combustion adjustment, high efficiency and energy saving, low nitrogen emissions, safe and reliable operation, low noise, and easy installation and maintenance.
Riello gas burner RS45-E The RS45-E burner is in a fire operation mode, with protection level IP40. Its structure is compact and equipped with a damper servo motor, which can adjust the combustion air to ensure combustion efficiency. Burner output: 160-330kW, or 137,600-283,800kcal/h. Gas pressure: minimum 20mbar, maximum 100mbar. Power supply: single phase, 230V±10%, 50Hz. Motor running current: 2A, speed 2750rpm. Ignition transformer: primary 230V/0.2A, secondary 8kV/12mA. Electric power consumption: 0.43kW. Functional Features: Efficient combustion: The air volume is accurately controlled through the damper servo motor, so that the gas and air are fully mixed, and efficient combustion can be achieved, which can reduce fuel consumption and operating costs. Safety and reliable: complies with many European standards such as EMC 89/336/EEC, low voltage 73/23/EEC, and is equipped with safety devices such as pressure switches, which can monitor combustion status in real time and ensure safe operation. Easy to install: The burner has an adjustable combustion head length, and the connecting wires of the gas valve group can enter the burner from the left or right, making it easy to install and wiring.
Riello gas burner RS50-M The RS50-M is a gas burner with a smooth transition of two-stage fires. It can also be adjusted proportionally by adding a PID regulator and a probe. The burner uses an integral cast aluminum shell, which has a compact structure and a small exterior size, making it easy to use and maintain. Its fan has a special pressure resistant structure, which allows the burner to operate safely on semi-positive and positive pressure boilers. The combustion head has a sliding connection flange, which allows the installer to install it in the appropriate position of the furnace. Catalog: about 500,000 calories/h. Scope of application: boiler, hot air furnace, heat treatment. Fuel: Gas. Air supply pressure: approximately 0.01MPa. Fuel consumption: about 20kg/h. Control method: proportional adjustment method. Protection level: IP40. Functional features: flexible combustion adjustment, high efficiency and energy saving, safe and reliable, low noise, and easy installation and maintenance.
Riello gas burner RS 510-E BLU
Riello gas burner RS 510-E BLU Output range: The power output range is wide, with a minimum power output of 680kW and a maximum power output of 5250kW. Gas flow rate: The minimum gas flow rate is 68m³ and the maximum gas flow rate is 525m³. Motor power: The rated power of the motor is 12kW, and the power supply frequency is 50Hz. Structural design: It adopts a unique design, with a compact size, easy installation and space-saving. It is also simple to use and easy to maintain. Functions: Diverse combustion modes: It has "smooth two-stage fire" or "proportional regulation" modes, allowing flexible adjustment of combustion power according to actual needs to meet the heat requirements under different working conditions. Precise control: It is equipped with an electronic microprocessor control panel to control the damper servo motor, which can precisely adjust the air-fuel ratio for high-precision regulation, ensuring combustion efficiency and stability. High efficiency and energy saving: Through electronic proportional regulation, higher proportional operation performance and efficiency can be achieved. Combined with frequency conversion technology, it can also reduce noise emissions and power consumption simultaneously, effectively saving energy and reducing operating costs. Reliable operation: It has high reliability in operation and ignition, and the operation and maintenance comply with the standards of diffusion flame burners. All kinds of accessories are complete, ensuring flexibility and stability in work.
RIELLO light oil burner R40 G5 LC
RIELLO light oil burner R40 G5 LC R40 G5 LC is a fire light oil burner, mainly used in the fields of home heating and other fields. Fuel type: light oil. Power range: Output is 28-60kW (2.3-5kg/h). Power supply requirements: single phase, 230V±10%, 50Hz. Current and speed: Motor running current is 0.7A, speed is 2850rpm (298rad/s). Capacitor: The start capacitor is 4uF. Ignition transformer: secondary is 8kV - 16mA. Oil pump pressure: Oil pump pressure 7-15bar. Power consumption: Total electrical power consumption 0.13kw, motor power consumption 0.09kw. Protection level: Electrical protection level is IP40. Functions: combustion function, safety protection function, stable operation function.
RIELLO light oil burner R40 G10 LC
RIELLO light oil burner R40 G10 LC R40 G10 LC is a one-section light oil burner, specially designed for small and medium-sized thermal energy equipment, mainly used in household heating and other fields, with high efficiency and safety features. Fuel type: light oil. Power range: Output is 54-120kW (4.5-10kg/h). Power supply requirements: single phase, 230V±10%, 50Hz. Motor parameters: operating current 0.7A, speed 2850rpm (298rad/s). Capacitor: The start capacitor is 4μF. Ignition transformer: secondary is 8kV - 16mA. Oil pump pressure: The oil pump pressure is 7-15bar. Power consumption: Total electrical power consumption is 0.17kW, motor power consumption is 0.09kW. Protection level: Electrical protection level is IP40. Function:Stable combustion function, safety protection function, low noise operation, and convenient installation.
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China