RIELLO oil and gas dual-purpose burner RLS 250-M MZ

RIELLO oil and gas dual-purpose burner RLS 250-M MZ RLS 250-M MZ is a light oil/gas dual fuel burner suitable for hot water boilers, steam boilers, thermal oil furnaces and other equipment. Fuel compatibility: supports dual mode switching of light oil/gas (G20/G25), and the fuel injection volume is adjustable by 1-30kg/h. Adjustment method: gas side proportional adjustment (0-100% continuously variable speed), and two-stage fire control on the fuel side. Fuel type: light oil, natural gas can also be used (G20, G21, G22, G23, G25, etc.). Power supply requirements: 230V/400V (with neutral wire), three-phase, 50Hz. Oil pump related: The oil pump output can reach up to 230kg/h when the pressure is 12bar, the pressure range is 10-21bar, and the fuel temperature is up to 90°C. Functions: combustion function, safety protection function, fault diagnosis function, noise control function.

RIELLO gas burner RS 410-M MZ

RIELLO gas burner RS 410-M MZ RIELLO RS 410-M MZ is a forced ventilated gas burner under the Italian Riello brand. It adopts mechanical proportional adjustment technology and is specially designed for industrial heating equipment. It belongs to the RS series and has low nitrogen emission characteristics. It is suitable for a variety of industrial and commercial scenarios. Output range: Covering medium and low power requirements. Applicable fuel: natural gas and other gas types‌. Functional Features ‌combustion control‌: Accurately adjust the air/gas ratio through servo motors (such as SQM40/SQN series) to ensure stable combustion‌. ‌Compatibility: Adaptable to steam boilers, hot water boilers and industrial heating equipment.

RIELLO gas burner RS 810-E BLU

RIELLO gas burner RS 810-E BLU 810-E BLU is a forced ventilated gas burner with high efficiency, low nitrogen, safety and other characteristics. It is mainly used in hot water boilers, steam boilers, thermal oil furnaces and other equipment. Adjustment method: The electronic adjustment method can more accurately control the combustion process and adapt to different working conditions. Output range: Output range is 1200 - 8000kW, equipment that can meet a variety of power requirements. Power supply requirements: The main power supply is 3N/400V±10%, 50Hz, the auxiliary power supply voltage can be selected from 230V/50 - 60Hz or 110V/50 - 60Hz, and the electrical protection level is IP54. Functions: efficient combustion, low nitrogen emissions, precise control, and safe protection.

RIELLO gas burner RS 45 BLU

RIELLO gas burner RS 45 BLU The RS 45 BLU is a forced ventilated integrated gas burner. Adjustment method: The default adjustment method is "smooth two-section fire". You can also implement the "proportional adjustment" mode after installing the PID ratio adjuster and the corresponding probe to meet the needs of different working conditions. Servo system: SQM series servo motor is standard, and the adjustment accuracy is ±1°. Structural design: The unique design ensures that the equipment is compact, simple to use, easy to maintain, and complete all kinds of accessories, ensuring work flexibility. Functions: efficient combustion, safe protection, low noise operation, flexible control.

RIELLO light oil burner R40 G3

RIELLO light oil burner R40 G3 R40 G3 is a single-stage light oil burner specially designed for small and medium-sized boilers and heating equipment, mainly used for efficient combustion of diesel. Electrical characteristics: single-phase power supply (1N), voltage 220V/50Hz, motor rated power 0.09kW. Power supply specifications: single-phase 230V±10%, 50Hz, starter capacitor 4μF, total power consumption ≤0.115kW. Oil pump performance: The maximum pressure of the gear pump is 14bar, the flow rate is 3.5L/h (at 10bar), and it must be equipped with a 30μm fuel filter. Protection level: IP40 dust-proof design can resist dust pollution in the boiler room, but it is necessary to avoid long-term exposure to environments with humidity ≥90%. Core functions: combustion control and safety protection, efficient combustion and adaptability, compact modular structure, high-temperature resistant materials.

RIELLO light oil burner R40 G5

RIELLO light oil burner R40 G5 The R40 G5 is a single-stage light oil burner specifically designed for small and medium-sized heating equipment, mainly used for efficient combustion of diesel, light diesel oil (LDO), and biodiesel. Power supply specification: Single-phase 230V ± 10%, 50Hz, starting capacitor 4μF, total power consumption ≤ 0.115kW. Oil pump performance: The gear pump has a maximum pressure of 14bar and a flow rate of 3.5L/h (at 10bar), and it is recommended to be used with a 30μm fuel filter. High-temperature resistant materials: The flame tube is made of stainless steel 316L and coated with a ceramic-based coating (0.3-0.5mm thick), capable of withstanding continuous high temperatures up to 1100℃, with a lifespan of ≥ 6000 hours. Protection grade: IP40 dust-proof design. Core functions: Efficient combustion control, intelligent diagnosis and safety protection, wide compatibility.

RIELLO gas burner RS 410-M BLU+CBF65(3970147)

RIELLO gas burner RS 410-M BLU+CBF65(3970147) Category: Burner Bartour RS 410-M BLU with valve is a low-nitrogen gas burner specially designed for industrial heating equipment, with an integrated gas valve group, suitable for hot water boilers, steam boilers and thermal oil furnaces and other scenarios. Rated power is 500-4450 kW, covering the needs of medium and large industrial equipment. Voltage specifications: 3-phase 380V/50Hz. Suitable gas type: liquefied gas/natural gas. Pipe diameter size: DN65 Core functions one. Proportional adjustment function: By installing a ratio adjuster, stepless adjustment between small fire and large fire can be achieved, automatically adapting to different output needs, and maintaining the temperature or pressure stable. Two. Valve group configuration: Siemens valve group system is standard. three.Control mode: Supports single-segment fire operation mode. Application fields: boiler equipment (steam/hot water boiler), thermal oil furnace, industrial heating equipment, direct combustion lithium bromide air conditioning unit.

Riello oil burner RL50

Riello oil burner RL50 The RL50 Combustor is an efficient combustion device designed for small and medium-sized industrial and commercial scenarios, with two-stage fire regulation, intelligent control and low emissions characteristics. Model: RL50 (fuel version) Fuel type: Natural gas/LPG. ‌Maximum thermal efficiency‌: 90%. ‌Scope of application: hot water/superheated water boiler, hot air generator, steam boiler and thermal oil furnace. ‌Adjustment method‌: Smoothly transition two sections of fire to adjust. Fuel Compatibility: ‌Fuel Version‌: Light Oil (such as Diesel) ‌Dual fuel version‌: Supports fuel/natural gas/liquefied gas switching (RLS50/M) ‌Power range‌: 50 kW (fuel version) or 178-332 kW (duplex version)‌ Functional Features ‌combustion control‌: ‌One-segment fire adjustment‌ (RL50) or ‌Double-segment fire adjustment‌ (RLS50/M)‌ An optional microelectronic control box provides operation status and fault diagnosis functions. ‌Structural Design‌: Use forward-tilt blade fans and sound insulation materials to reduce noise emissions‌. The shell is partly made of engineered plastic to reduce weight and improve durability‌. ‌Safety Protection‌: Equipped with UV flame detectors (such as FC13 electric eye) Fuel circuit integrated pressure regulating valve and safety valve Application scenarios‌ ‌Industrial heating equipment‌: hot water boiler, steam boiler, thermal oil furnace, hot air generator‌. Categories:Branded burners Riello

Riello oil burner RL250

Riello oil burner RL250 The RL250 Combustor is a two-stage fire burner specially designed for medium and large industrial and commercial thermal equipment, with high power output, intelligent control and efficient combustion characteristics. Fuel Compatibility: ‌Fuel Version‌: Light Oil (such as Diesel) ‌Dual fuel version‌: Supports fuel/gas switching (RLS250/M)‌ Power range: 2290 kW. Power supply: three-phase 380V, 50Hz. Adjustment method: Two-stage fire adjustment (mechanical or smooth transition) Optional PID ratio adjustment (probe required) ‌Applicable fuel‌: Light oil (diesel) or natural gas/liquefied gas (dual fuel version) Fuel consumption: 100 kg/h (fuel version) ‌Atomization Form‌: High Pressure Atomization (Fuel Version)‌ Adjustment method: Two-stage fire adjustment (mechanical or smooth transition) Functional Features ‌combustion control‌: ‌Two-stage fire adjustment‌: supports smooth transition or mechanical segmentation adjustment to meet different load needs‌. ‌Proportional Adjustment‌: PID regulator can be installed to achieve more accurate power control‌. ‌Structural Design‌: Vertical structure, suitable for industrial equipment such as boilers, hot air generators, thermal oil furnaces, etc. ‌Low noise design‌: Forward-tilting blade fan + sound insulation material to reduce operating noise‌. ‌Safety Protection‌: Equipped with flame detectors (such as UV photoelectric tubes)‌ Fuel circuit integrated pressure regulating valve, safety valve, etc. Application scenarios: Industrial heating equipment: steam boiler, hot water boiler, thermal oil furnace, hot air generator. Categories:Branded burners Riello

Riello oil burner RG3

Riello oil burner RG3 RG3 is a fuel combustion engine that adopts a single-stage fire regulation method and is suitable for providing a stable heat source in industrial production. Fuel type: Fuel (such as diesel) Power: 178kW, heating capacity reaches 150,000 kcal/hour. Functional Features ‌Efficient combustion‌: Enable full combustion through optimized design and reduce energy consumption‌. ‌Safety Guarantee‌: Equipped with safety protection devices to avoid combustion accidents ‌. ‌Intelligent control‌: Using an electronic proportional adjustment system, the output power can be accurately adjusted ‌‌. ‌Multiple scenarios: suitable for boilers, industrial furnaces and other equipment, compatible with fuel and fuel. Combustion control: single-stage fire adjustment, mechanical control; optional programming controller (such as RMO series) to achieve automated operation. ‌Structural Design‌: Compact gun-type housing for easy installation. High-pressure atomization nozzle ensures full combustion of fuel‌. ‌Safety Protection‌: Equipped with UV flame detectors (such as FC13 electric eye) Oil circuit integrated pressure regulating valve and shut-off valve‌. Categories:Branded burners Riello

Riello oil burner RL190-M

Riello oil burner RL190-M RL190-M belongs to the RL/M series two-stage fire light oil burner, designed for medium and large industrial thermal energy equipment, and has the characteristics of efficient combustion, intelligent control and compact structure. Model: RL190-M (fuel version) Fuel Compatibility: ‌Fuel version‌: Light oil (diesel, maximum viscosity at 20℃≤6mm²/s)‌ ‌Dual fuel version‌: Supports fuel/natural gas/liquefied gas switching (RLS190/M)‌ ‌Power range‌: 1.9 million kcal/hour. Power range: 1423-2431 KW, adapted to various power requirements. Functional Features ‌combustion control‌: ‌Two-stage fire adjustment‌ (RL190-M), supports smooth transition or mechanical switching‌. Optional microelectronic control box (such as RMO 88.53) provides operation status and troubleshooting functions‌. ‌Structural Design‌: High-pressure atomization nozzle ensures full combustion of fuel‌. The fan adopts a forward-tilt blade design to reduce noise‌. ‌Safety Protection‌: UV flame detector (such as FC13 electric eye)‌ Oil circuit integrated pressure regulating valve and safety valve‌. Two-stage fire design: control combustion intensity in segments, optimize combustion efficiency, and reduce energy consumption. ‌Proportional adjustment‌: Supports precise adjustment of combustion output to adapt to changes in dynamic working conditions. ‌Safety Protection‌: Equipped with flame detectors, solenoid valves and other safety devices to ensure operational stability. ‌Application Scenarios‌ ‌Industrial Boilers‌: Hot water boilers, steam boilers, thermal oil furnaces‌. ‌Hot air equipment‌: dryer, coating line, etc.

Riello Dual fuel burner RLS130

Riello Dual fuel burner RLS130 Model: RLS130 RLS130 belongs to the RLS series dual fuel two-stage fire burner, designed for medium and large industrial and commercial thermal energy equipment, supports two fuels, light oil (diesel) and gas (natural gas/LPG), and has the characteristics of efficient combustion, intelligent control and flexible adaptation. Output power: 930-1512kW in high fire mode, 465kW in low fire mode. Power supply requirements: 3-phase 380V, 50Hz, motor power 2200W. Fuel compatibility: light oil (diesel, maximum viscosity at 20"C ≤6mmz/s); natural gas/liquefied gas (valve group needs to be switched) Power range: 465-1163 kW (fuel) or 349-1163 kW (gas) Control method: Second-stage fire adjustment (smooth transition) Core functions: two-stage fire intelligent adjustment, microprocessor control system, efficient combustion and environmental protection performance, and safety protection mechanism. Dual fuel switching valve group (such as MBZRDLE415B01S20 gas valve group) High-pressure calcification nozzle (fuel) and gas ratio control valve (fuel) Application scenarios: Mainly used in industrial boilers, drying equipment, heat treatment devices, etc. where high-calorie value burners are required. Categories:Branded burners Riello

Riello gas burner RS130-M

Riello gas burner RS130-M Model: RS130/M RS130-M is a gas burner, belonging to the RS series two-stage fire gas burner, designed for medium and large industrial and commercial thermal energy equipment, with the characteristics of efficient combustion, intelligent control and flexible adaptation. Calorie: 1.3 million calories per hour. ‌Fuel‌: Natural gas/liquefied gas. ‌Suppressure‌: 12 KPa ‌Voltage‌: 220-380V ‌Power range‌: 254-1600 kilowatts‌. Functional Features ‌Two-stage fire adjustment‌: Supports smooth two-stage fire operation, and proportional adjustment can be achieved through PID regulator to improve combustion efficiency and reduce fuel consumption. ‌Electronic control system‌: equipped with a status display screen, which can monitor operating parameters (such as the number of ignitions, fault information and operating time) in real time. ‌Low noise design‌: Use forward-tilt blade fans and sound insulation materials to reduce operating noise. ‌Multiple fields: Suitable for hot water boilers, hot air furnaces, steam boilers and thermal oil furnaces, compatible with a variety of fuel types. Application scenarios: Mainly used for industrial equipment such as food drying, rotary kilns, hot air furnaces, etc., providing stable heat source support. Categories:Branded burners Riello

Riello gas burner 40 GS20-M

Riello gas burner 40 GS20-M GS20-M is an industrial gas burner of the RIELLO brand. It belongs to the proportional-adjusted burner series and is mainly used in boilers, hot air generators and industrial heating equipment. The output power is 43/82 +194kW. The operating temperature range is 0-40℃. The power supply is 1/230V/50Hz, and the total power supply is 0.250kW. ‌Fuel type‌: Supports natural gas, liquefied gas and other gas, which is fully burned and energy-saving. Adjustment method: proportional adjustment (M model), which can accurately control the gas and air mixing ratio to achieve low nitrogen emissions (reduce nitrogen oxides by 30%~50%) Functional Features ‌Double-segment fire design‌: Some models (such as FS20) support smooth double-segment fire adjustment to meet different load needs‌. ‌Electronic control‌: equipped with RS810E and other controllers, supporting operating parameter monitoring and fault diagnosis (such as red light alarm, pressure abnormality, etc.)‌ ‌Low noise‌: Use front-tilt fan blades and sound insulation materials to reduce operating noise‌. Safe and reliable: Equipped with multiple safety protection devices (such as flame detectors, pressure switches) to ensure the safety of equipment operation. Servo motor control function: The servo motor can drive the damper to standby state and close the fully closed, low and high-fire positions, accurately control the air flow, thereby achieving good combustion effect. Applicable scenarios: Suitable for all kinds of boilers, hot air furnaces and industrial heat treatment equipment, especially for scenarios with high requirements for temperature control accuracy. Categories:Branded burners Riello

Riello gas burner RS410-M MZ

Riello gas burner RS410-M MZ RS410-M MZ is a high-performance gas burner specially designed by RIELLO for industrial thermal energy equipment. It belongs to the RS 310-610/M MZ series and is suitable for medium and low temperature hot water boilers, steam boilers, thermal oil furnaces and drying equipment. Output power: 800-4900 kW (natural gas G20), covering medium and high load demand in the industrial field. Operating mode: Supports "smooth two-section fire" or upgrades to proportional adjustment mode by installing a PID ratio regulator (the adjustment ratio can reach 1:4), and the combustion efficiency can be dynamically adjusted according to the actual load. Fuel type: gaseous fuels such as natural gas (G20), adapted to gas supply systems of different pressure levels (maximum gas pressure can reach 500 mbar). Power supply and protection: three-phase power supply (such as 3/400V/50Hz), electrical protection level IP54, suitable for harsh industrial environments. Functional Features ‌Operation mode‌: Supports "smooth two-section fire" or proportional adjustment to adapt to different working conditions‌. ‌Efficient combustion‌: Integrated design ensures high combustion efficiency, reduces fuel consumption and operating costs‌. ‌Low Nitrogen Technology‌: Some models (such as BLUs) reduce nitrogen oxide emissions by optimizing combustion head design‌. Application scenarios: industrial boilers (hot water/steam), thermal oil furnaces, hot air furnaces, etc. Categories:Branded burners Riello