Riello Two stage matchstick oil burner GULLIVER RG5D

Riello Two stage matchstick oil burner GULLIVER RG5D Brand:RIELLO Model: GULLIVER RG5D GULLIVER RG 5D two-stage fire diesel burner (burner) Origin: Italy Scope of application: boilers, hot blast furnaces, steam generators, thermal oil furnaces Main functions: dual-stage fire precise temperature adjustment, stable fuel control, comprehensive safety protection, strong adaptability and expandability Burner output: 95/142- 296kW (8 - 25 kg/h) Fuel: light oil (0# and diesel below 0#), maximum viscosity at 20°C: 6mm2/s (1.5°E) Power supply: single phase, 230V±10%~50Hz Motor: operating current 2.1A Control box model: RBL 552SE Ignition transformer: secondary 8 kV - 22mA Oil pump model: RBL Total electrical power consumption: 0.47kw Motor power consumption: 0.25kw The burner complies with the following standards: Directive: 89/336/EEC 73/23/EEC 98/37/EEC 92/42/EEC Standard: EN267 Certification: CE-0036 0325/01 The electrical protection level of the burner is IP40. Categories:Branded burners Riello

Riello Single stage matchstick oil burner GULLIVER RG5S

Riello Single stage matchstick oil burner GULLIVER RG5S Brand:RIELLO Model: GULLIVER RG5S Type: burner GULLIVER RG5S single-stage light oil burner (burner) Origin: Italy Scope of application: hot water boilers, heating boilers, hot blast furnaces Main functions: stable single-stage fire combustion, efficient fuel atomization combustion, low noise and safety protection, flexible adaptation and installation. Burner output: 13.5-26.2kg/h-160-310kw Fuel: light oil (such as diesel), the fuel viscosity needs to be controlled at 4 - 6mm²/s at 20°C Power supply: single phase, 230V±10%~50Hz Fuel: light oil, viscosity 6mm2/s at 20℃ Motor operating current: 2.1A-2730rpm-286rad/s Capacitance: 8μF Categories:Branded burners Riello

Riello gas burner RS1200

Riello gas burner RS1200 Riello RS1200 high-power low-nitrogen emission burner is suitable for a variety of industrial boilers and is both environmentally friendly and practical. With advanced power output control and ventilation technology, this burner takes into account both operational stability and energy efficiency, and is suitable for large heating needs in industrial scenarios. Output range is 1350-11100 kW Fuel and gas supply: Suitable for natural gas and other gas types, some support dual-fuel mode, and the gas supply pressure can reach 0.04Mpa The motor protection level can reach IP54 Ignition transformer input 230V, output 1×15kV Main functions: precise proportional adjustment, ultra-low emission and environmental protection, multi-mode stable operation, convenient operation, maintenance and adaptation. Categories:Branded burners Riello

Riello Gas burner GULLIVER BS1

Riello Gas burner GULLIVER BS1 Model: GULLIVER BS1 Product name: RIELLO Gulliver BS1 gas burner Voltage: 230V-50Hz Applications: small hot blast stoves, small drying ovens, household and commercial hot water boilers and other equipment Usage: Installation needs to be performed by professionals. Adjust the extension length of the combustion head through the movable flange to suit the boiler; adjust the windshield and combustion head with the help of the indicator scale, and read the wind pressure value through the wind pressure test point to calibrate the operating status. Fuel: G20 gas, G25 gas and liquefied petroleum gas (LPG) Type: gas burner Keywords: Riello GULLIVER BS1 Condition: Brand new Function: Stable heating and combustion Applicable industries: heating industry, small food processing plants (adapted to drying equipment) Warranty period: 1.5 years Selling points: original quality assurance, low-nitrogen environmental protection compliance, compact, silent and space-saving, worry-free operation and maintenance, low cost, broad-spectrum adaptability. Categories:Branded burners Riello

Riello Gas burner GULLIVER BS2

Riello Gas burner GULLIVER BS2 Model: GULLIVER BS2 Product name: RIELLO Gulliver BS2 gas burner Voltage: 230V-50Hz Application: small and medium-sized hot blast furnaces, drying furnaces, commercial hot water boilers and other equipment Usage: Installation needs to be performed by professionals. Use the movable flange to adjust the length of the combustion head to adapt to boiler front plates of different thicknesses; adjust the position of the windshield without disassembling the shell, and calibrate the combustion conditions by reading the values from the wind pressure test point. Fuel: G20 gas, G25 gas and liquefied petroleum gas (LPG) Type: gas burner Keywords: Riello GULLIVER BS2 Condition: Brand new Functions: Stable and efficient heating, intelligent safety protection, low-nitrogen silent operation, convenient adaptive operation and maintenance. Applicable industries: heating industry, small food processing plants (adapted to drying equipment for heating) Warranty period: 1.5 years Selling points: original quality assurance, low nitrogen environmental protection compliance, compactness and wide adaptability, worry-free operation and maintenance, low cost, silent and comfortable experience. Categories:Branded burners Riello

Riello Gas burner RS610-M BLU

Riello Gas burner RS610-M BLU Model: RS610-M BLU Product name: RIELLO burner RS610-M BLU Power supply voltage: 3N-400V -50Hz Electrical protection level: IP54 Thermal output coverage: 1000-6250kW Application scenarios: The core is suitable for hot air boilers, steam boilers and thermal oil furnaces Fuel: suitable for G20 and G25 models of natural gas Type: Industrial grade gas burner Keywords: RIELLORS610-M BLU industrial gas burner Condition: Brand new Functions: Precise load regulation, low nitrogen environmental protection emissions, multiple safety protections, flexible adaptive operation and maintenance, stable and durable operation Applicable industries: energy and chemical industry, building materials processing, food and beverage processing Selling point: 1. High-power and efficient adaptation: 1000-6250kW ultra-large output coverage, 5:1 wide adjustment ratio, can accurately match the fluctuating heating load in industrial production, and one device can meet the large load needs of multiple scenarios. 2. Extremely low-nitrogen compliance and worry-free: NOx emissions are as low as 51mg/kWh, far exceeding conventional environmental protection standards. It is suitable for industries with strict environmental requirements such as energy and chemicals, building materials, and food, and avoids the risk of later rectification. 3. Original quality is stable and durable: Continuing Riello's industrial-grade product design standards, the core components have been rigorously tested and have high protection levels. They can adapt to complex industrial working conditions, have strong long-term continuous operation reliability and long service life. 4. Intelligent and convenient control: The digital control system is simple to operate, supports real-time monitoring of operating status, flexibly switches between two-stage fire and proportional adjustment modes, and adapts to different heating equipment and process requirements. Categories:Branded burners Riello

Riello Oil and gas dual-purpose burner RLS50

Riello Oil and gas dual-purpose burner RLS50 Model: RLS50 Product name: Riello RLS50 oil and gas dual-purpose burner Power supply voltage: 230V-50Hz Application scenarios: Mainly used in steam boilers, thermal oil furnaces and other equipment. Instructions for use: During installation, it needs to be adapted and connected to the combustion system of boilers, furnaces and other equipment, and operations such as ignition and combustion adjustment are completed through the microelectronic control box; during operation, the fire power can be switched according to the heating demand with the help of the two-stage fire adjustment function. The fan, combustion head, gas valve group and other components need to be checked regularly on a daily basis to ensure the normal operation of the equipment. Fuel: light oil (such as diesel) and gas (such as natural gas, liquefied gas, etc. Class I, II, III gas) can be used Type: oil and gas dual-purpose burner Function: efficient combustion Applicable industries: HVAC, chemical industry, food processing, manufacturing and other industries. Categories:Branded burners Riello

Riello gas burner GULLIVER RS5

Riello gas burner GULLIVER RS5 Model: RS5 Product name: RIELLO GULLIVER RS5 single-stage fire gas burner Output range: 160-330kW Compatible with single-phase 230V±10%, 50Hz power supply Ignition transformer secondary output 8kV/12mA Electric power consumption is only 0.43kW Application: Specially used for small and medium-sized thermal energy equipment such as hot water boilers, steam boilers, and hot blast furnaces, and is suitable for building heating, small industrial furnace heating and other scenarios. Usage: During installation, the flange must be fixed to the boiler door through an insulating pad to ensure that the combustion head completely passes through the front wall of the boiler; the gas pipeline must be connected to a manual ball valve, filter, gas pressure switch and voltage regulator in order, and the gas pressure must be controlled between 20-100mbar. Fuel: natural gas, liquefied petroleum gas Type: gas burner Keywords: Boiler supporting gas burner. Functions: Stable single-stage fire heating, low consumption and efficient combustion, convenient operation and maintenance design, flexible adaptive installation, and safety protection mechanism. Applicable industries: HVAC industry, food processing industry, light industrial manufacturing, etc. Categories:Branded burners Riello

Riello gas burner GULLIVER RS5D

Riello gas burner GULLIVER RS5D Model: RS5D Product name: RIELLO GULLIVER RS5D two-stage fire gas burner Output range: 160-345kW Compatible with single-phase 230V±10%, 50Hz power supply Electrical power consumption 0.45kW The whole machine adopts a compact design, small size and low noise. It is equipped with a microprocessor-based safety program controller, which can display the operating status and diagnose faults in real time. The performance of the combustion head and fan have been optimized and can be adapted to a variety of boiler models, with outstanding safety and reliability. Fuel: natural gas (G20, G25, etc.), it can also be adapted to liquefied petroleum gas (LPG, propane/butane). The gas pressure is required to be stable within the specified range (natural gas 20-100mbar, liquefied gas needs to be adapted to a special pressure reducing valve) Type: gas burner Keywords: Boiler supporting gas burner. Functions: Two-stage fire for flexible heating, low-noise and efficient combustion, convenient installation and maintenance, and safety protection mechanism. Applicable industries: HVAC industry, food processing industry, light industrial manufacturing, etc. Categories:Branded burners Riello