SIEMENS Control box RMG-M88.62C2

SIEMENS Control box RMG-M88.62C2 Control box RMG-M88.62C2：It is a microprocessor-based burner controller, mainly used to monitor one or more fire forced ventilation gas burners. Power supply voltage: AC 220 - 240V. Power supply frequency: 50 - 60Hz. Power consumption: 20VA. Safety Level: Level I. Size: Approximately 11.07cm x 6.45cm x 10.37cm. Weight: approximately 0.26Kg. Main functions: flame detection, air pressure monitoring, low voltage protection, status display, and sequential control.

SIEMENS Control box LME22.233C2

SIEMENS Control box LME22.233C2 Control box LME22.233C2：It can be used in burners, boilers and other equipment, suitable for fuel oil or gas fuel, and can monitor and control single-stage or two-stage forced ventilation gas or fuel oil/gas intermittent operation burners. It is suitable for small and medium capacity (up to 350kW) burners. Working voltage: AC 230V, -15%/+10%. Power consumption: 12VA. Protection grade: IP40. Operating temperature range: -20℃ to +60℃. Weight: about 160g. Functional features: flame monitoring, low voltage detection, air pressure monitoring, remote reset, status display, repeated start limit, precise timing control, intermittent operation control.

SIEMENS Controller LFL1.635

SIEMENS Controller LFL1.635 Controller LFL1.635:It is applicable to burners, boilers and other equipment, and can be used for fuel oil or gas fuel. It is mainly used for monitoring and controlling single-stage or two-stage forced ventilation gas or oil/gas intermittent operation burners with small and medium capacity (up to 350kW). Working voltage: AC 230V, -15%/+10%. Power consumption: 12VA. Protection grade: IP40. Working temperature range: -20℃ to +60℃. Weight: about 160g. Functional features: flame monitoring, low voltage detection, air pressure monitoring, remote reset, status display, repeated start limit, precise timing control, intermittent operation control.

SIEMENS Controller LMV26.300A2

SIEMENS Controller LMV26.300A2 Controller LMV26.300A2：It is a microprocessor controlled combustion controller designed for the built-in fuel air/fuel ratio control of the blower burner, suitable for the control and monitoring of medium and high power blower burners. Power supply voltage: AC 230V. Suitable sensors: can be matched with flame sensors or ion rods such as QRA2, QRA4, QRA10, QRB, QRC. Functional features: combustion control, air-fuel ratio control, fan control, flame monitoring, rich interface, remote control, dual fuel support.

SIEMENS gas combination valve VGD 40.065

SIEMENS gas combination valve VGD 40.065 SIEMENS gas combination valve VGD 40.065：It is a device used for gas valve assembly, often connected to forced ventilation burners, mainly for controlling the supply and cut-off of gas. This gas combination valve is composed of an electric actuator and a valve, and is a normally closed two-way valve. Flow rate: 160m³/h at a pressure difference of 10mbar. Safety level: Class A (EN161). Available gases: Gas 1, 2, 3 or air. Internal temperature: -15℃ to +60℃. Power: 8VA. Static pressure resistance: 700mbar. Material: Molded cast aluminum. Functional features: Safety cut-off, flow control, automatic control, pressure protection.

SIEMENS gas combination valve VGD20.503

SIEMENS gas combination valve VGD20.503 VGD20.503 is a normally closed two-way valve, complies with EN 161 standard, and is a gas combination valve of grade A. It is mainly used in gas valve assembly and is designed for the combined use of 2 SKP actuators. It can realize the slow opening and fast switching function after being connected to the SKP electro-hydraulic actuator. Power: 8VA. Gas available: gas 1, 2, 3 or air. Weight: 3.2kg. Static pressure: 600mbar. Dynamic pressure: 600mbar. Functional features: safe cutoff, flow adjustment, slow on and fast shutdown.

SIEMENS hydraulic actuator SKC60

SIEMENS hydraulic actuator SKC60 SKC60:It is an electro-hydraulic actuator, mainly used to drive Siemens two-way valves and three-way valves, etc., and is suitable for control valves and safety shut-off valves in HVAC systems. Rated thrust: 2800N. Rated stroke: 40mm. Operating voltage: AC24V. Control signals: DC0-10V, DC4-20mA or 0-1000Ω. Running time: both on/off are 120s. Protection level: IP54. Ambient temperature: -15℃-55℃. Functional Features: Flow characteristics are optional: Linear or equal proportional flow characteristics can be selected to meet different application needs. Valve position feedback: It has valve position feedback function, which can feedback the actual position signal of the valve to the control system, making it easier to monitor the valve status in real time. Stroke verification: Supports stroke verification to ensure the accurate stroke of the actuator and ensure that the valve can be opened and closed to the designated position normally. LED status display: The operating status of the actuator is displayed through the LED indicator, which facilitates operators to intuitively understand the operation of the equipment. Forced control function: Forced control can be achieved through terminal Z, and in some special cases, the actuator can be forced to operate. Manual adjustment: It has manual adjustment function, which facilitates on-site debugging and maintenance. It is also equipped with position indication, allowing you to intuitively see the manual adjustment position of the valve.

SIEMENS Actuator SKP75.003E2

SIEMENS Actuator SKP75.003E2 SKP75.003E2：It is an electric hydraulic actuator, mainly used in gas combustion devices, can realize air-fuel ratio control, and is often used in combination with Siemens gas valves. This actuator is suitable for Class I, II, and III gases. Its safe shutdown (on/off) characteristics comply with EN161 standards, has the characteristics of slow on and fast switch, and has low power consumption. The actuator can be equipped with terminal switches (factory setting), but SKP75.003E2 is of the type of terminal switch without terminal switches and air-fuel ratio controllers. Power supply: AC100-110V or AC220-240V. Main voltage: AC220V±15% to AC240V±10%, AC100V±15% to AC110V±10%. Main frequency: 50-60Hz±6%. Power: 13.5VA. Protection level: IP54. Weight: 1.1kg. Functional features: air-fuel ratio control, safe cut-off, slow on and fast shutdown.

RIELLO 525SE controller（3001149)

RIELLO 525SE controller（3001149) 525SE：Designed based on the principle of microprocessor controller, it is suitable for forced ventilation and intermittent operation of gas burners. It can be used for one or more fire control, and complies with EN298 standards. The built-in ignition transformer parameters are 8KV - 16mA, the flame detection uses an ion rod, the working voltage is usually 220V (RMG88.62A2 model), there is a fault reset button, and an LED red light display. Functional features: ignition control, flame monitoring, fault display and reset, operation control.

RIELLO controller 525SE (3001165)

Riello controller 525SE (3001165) 525SE：Designed based on the principle of microprocessor controller, it is suitable for forced ventilation and intermittent operation of gas burners. It can be used for one or more fire control, and complies with EN298 standards. The built-in ignition transformer parameters are 8KV - 16mA, the flame detection uses an ion rod, the working voltage is usually 220V (such as the RMG88.62A2 model), there is a fault reset button, and an LED red light display. Functional features: ignition control, flame monitoring, fault display and reset, operation control.

RIELLO servo motor STA13 B0.36-8 4N21 L(3002332)

Riello servo motor STA13 B0.36-8 4N21 L(3002332) This servo motor is a special motor used in the field of burners. It belongs to the category of electric actuators. It can accurately control the movement of burner-related components to ensure the stability and efficiency of the combustion process. It has the characteristics of superior performance, easy operation, and stable operation. Operating voltage: 220V. Frequency: 50Hz. Protection level: IP45. Motor type: AC motor. Speed: 450rpm. Functional features: precise control, stable operation, adapt to burner working conditions, and protection functions.

RIELLO controller CMG-M88.62D2(20211169)

Riello controller CMG-M88.62D2(20211169) Controller CMG-M88.62D2It is a burner program controller of the riello brand, which can be used for gas burner proportional adjustment control. Designed based on the principle of microprocessing controller, it is used to monitor the operation of one or more sections of fire forced ventilation gas burners, comply with EN298 standards, and is designed and manufactured by Siemens according to the technical requirements of Leya Road. The operating voltage is usually about 220V, and the built-in ignition transformer can provide the high voltage required for ignition. The ignition transformer parameters are generally about 8KV - 16mA. It has multi-color LEDs for displaying status and fault information. Functional features: combustion control, flame monitoring, safety protection, fault display and reset, sequential control.

RIELLO nozzle bracket（3006420）

Riello nozzle bracket（3006420） It is mainly used to fix and support the nozzles of the burner to ensure that the nozzles are in the correct position in the burner to ensure that the injection effect of fuel or gas meets the combustion requirements. It is usually made of metal materials, has certain strength and high temperature resistance, and can adapt to the high-temperature working environment inside the burner. Functions: Fixed nozzle, positioning guide, support protection.

Riello gas burner G40 FS10(3756435)

Riello gas burner G40 FS10(3756435) The burner pays special attention to reducing operating noise, has the characteristics of easy installation and adjustment, small appearance, and can be adapted to a variety of boilers on the market. Power: 42-116kW, heat output is about 36,000-100,000kcal/h. Fuel: Mainly natural gas, the minimum pressure of natural gas is 16 mbar and the maximum is 100 mbar. Power supply: single phase, 230V±10%, 50Hz. Motor current: 0.7A. Control box model: RMG88.620A2. Ignition transformer: primary 230V/1.8A, secondary 8kV/30mA. Electrical protection level: IPX0D (equivalent to IP40). External dimensions: approximately 305×262×346mm. Features Stable combustion: With a single-stage flame combustion control method, it can achieve stable combustion and provide continuous and stable heat for boilers, hot blast stoves and other equipment, meeting their heating requirements. Good compatibility: Using natural gas as fuel, it is suitable for various equipment powered by natural gas and can adapt to a certain range of gas pressure, typically between 18mbar and 360mbar. Safe and reliable: It complies with multiple regulations such as 90/396/EEC and 89/336/EEC, as well as EN676 standards, and has obtained CE certification. The electrical protection level is IPX0D, providing a certain level of electrical safety protection and ensuring the safety of equipment operation to a certain extent. Easy to install: It is compact in size with a relatively compact overall dimension, making installation and disassembly convenient, facilitating on-site installation and maintenance.

Riello oil burner RL190 (20216642)

Riello oil burner RL190 (20216642) The RL190 burner is an integrated structure, using mechanical pressure atomization. It can be adapted to various types of combustion chambers and is suitable for commercial and industrial equipment such as hot water boilers and steam boilers, providing stable heat output. Fuel: Usually light oil, such as diesel or kerosene. Motor power: Approximately 1.1kW. Power supply: Generally three-phase, 380V ± 10%, 50Hz. Maximum fuel flow rate: Approximately 19kg/h. Combustion air volume: Varies with load, with a maximum air flow rate of approximately 250m³/h. Overall dimensions: Approximately 560×400×470mm in length × width × height. Functional features: Combustion control, safety protection, high efficiency and energy saving, easy installation, and stable operation.