Baltur BTG20 ignition needle

Baltur BTG20 ignition needle BTG20 ignition needle：It is the core ignition component of Italian BALTUR burners, designed for BTG20 series gas burners. Adaptive model: Specially used for BTG20 dual-section fire/proportional adjustment burner, compatible with natural gas, liquefied gas and other fuels. Function: Accurate ignition, safety protection, and adapt to the working environment.

Danfoss oil mouth 28.0 60° semi-solid

Danfoss oil mouth 28.0 60° semi-solid oil mouth 28.0 60° semi-solid:It is a Danfoss brand atomization nozzle assembly designed for combustion engine fuel systems. Spray hole specifications: 28.0 gallons/hour flow rate (approximately 106L/h), 60-degree spray cone angle, semi-solid atomization mode. ‌Adapted fuel‌: Light oil/heavy oil combustion engine, the working pressure range is usually 10-20 bar. Functional Features: o‌ne.Atomization control‌ Semi-solid oil mist is formed through precision-processed spray holes, taking into account combustion efficiency and flame stability. ‌two. Corrosion-resistant design‌ The main body of copper alloy material is long-term resistant to fuel sulfide corrosion.

Baltur solenoid valve RAMPA MV15BA0C-R3-4

Baltur solenoid valve RAMPA MV15BA0C-R3-4 The RAMPA MV15BA0C-R3-4 solenoid valve is a control component specially designed for gas combustion systems. Valve body type: Direct-acting two-position two-way valve, using a combination of brass valve body and fluoroelastic seal. ‌Voltage specification‌: Standard 24V DC coil voltage, protection level IP65. Core functions: ‌one. Quick response‌ When powered on, the solenoid force directly drives the valve core, and the operating time is less than 1 second, which is suitable for high-frequency switching scenarios. ‌two.Safe cut‌ The gas passage is urgently cut off through the spring force at the moment of power failure, which complies with the EN161 safety standards. Adaptation system: Matched with Baltur RAMPA series combustion controllers and supports natural gas/LPG dual fuel system. The maximum working pressure is 36mbar, and the medium temperature range is -15℃~80℃.

DUNGS solenoid valve MB-ZRDLE 412 B01 S50

DUNGS solenoid valve MB-ZRDLE 412 B01 S50 MB-ZRDLE 412 B01 S50:This is a gas multi-functional combination solenoid valve of the German brand DUNGS. Structural type: Double-stage combination valve (primary regulator + secondary solenoid valve), DN32 diameter (Rp1-1/4 pipe thread). Pressure range: Input pressure 20-50 mbar (S50 model marking), maximum working pressure 360 mbar. Core functions: 1. Two-level safety control The primary valve opens quickly, and the secondary valve can adjust the opening speed. Integrated with a precision filter (0.8mm mesh) and pressure regulator. 2. Flow optimization Through the main flow throttle and hydraulic opening lag design, it achieves high flow output under low pressure difference. Application scenarios: Suitable for natural gas / liquefied petroleum gas combustion systems. Typically matched with industrial burners, such as ECLIPSE, SHOEI, OLYMPIA, etc. brands.

Baltur gas burner TBG 80 LX P (17830010)

Baltur gas burner TBG 80 LX P (17830010) Product code: 17830010 TBG 80 LX P :It belongs to the dual-section fire gas burner series, suitable for natural gas/liquefied gas fuel‌. Core functions: It adopts progressive two-stage fire combustion technology and supports electronic cam adjustment. The BT 320 control system is standard, with fault code display function‌. Application scenario: supporting combustion system for industrial boilers, hot air units and other equipment.

Baltur gas burner TBG 110 LX P (17860010)

Baltur gas burner TBG 110 LX P (17860010) Product code: 17860010 Double-section fire gas burner, suitable for natural gas/liquefied gas fuel‌. The power range covers 180-1200kW. The working voltage is 220V, and the structure is vertical. Core function: Adopt progressive two-stage fire combustion technology, supporting electronic cam adjustment‌. The ionizing electrode flame detection system is standard, and the electrical protection level is IP54‌. Application scenarios: Supporting heating equipment such as industrial boilers and hot air units‌. Suitable for environmentally friendly renovation projects that require low nitrogen emissions‌.

DUNGS flange G1-2 kpl (219007)

DUNGS flange G1-2 kpl (219007) G1-2 KPL (219007) is a special flange for industrial pipeline connections. It adopts the German standard DIN standard design. The "G1-2" in the model means that the thread specification is G1/2 inch, and the "KPL" means that the components include flanges, gaskets and matching fasteners. Its core function is to achieve detachable sealing connection of the end of the pipeline through bolt fastening, which is suitable for high-pressure scenarios such as gas equipment and industrial burners. Core functions: one. Sealing performance The spacer is deformed and filled with micro gaps on the sealing surface by pre-tightening bolts to achieve zero leakage of the medium. Supports the delivery of gas, liquid and other media, and is suitable for burner accessories such as Bernu valve sets. two. Engineering Application Designed specifically for gas valve sets for burners such as RIELLO, Baltur, etc. It can be used as a maintenance breakpoint in industrial pipeline systems to facilitate equipment maintenance.

DUNGS pressure switch LGW 3 A2

DUNGS pressure switch LGW 3 A2 LGW 3 A2:Safety control components designed for combustion equipment. Pressure range: suitable for pressure differential monitoring (adjustable) of 0.4-3mbar, maximum pressure of 500mbar. ‌Working Environment‌: Applicable to non-corrosive gases such as air and flue gas, and is prohibited from being used for combustion gases. Core functions‌: ‌one. Pressure Differential Monitoring‌ The rated pressure value is set by the adjustment wheel to monitor the changes in gas or air pressure in real time. Automatically cut off or convert circuits when the pressure is below/beyond the set point to ensure safety of combustion. ‌two. Adjustment and Operation‌ Rotate the adjusting wheel clockwise to increase the pressure setting value and decrease counterclockwise. Some models (such as LGW3A2P) are equipped with detection keys for quick verification. ‌three.Compatibility‌ Adaptable to gas valve group and burner equipment, complying with CE certification standards. The mechanical life is 100,000 times and the rated voltage is 220V. ‌Application Scenarios‌: Safety pressure control of industrial burners and boiler systems. Pressure monitoring of ventilation and air conditioning equipment.

DUNGS pressure switch GW 150 A5

DUNGS pressure switch GW 150 A5 Model category: Mechanical adjustable pressure monitor, belonging to the GW..A5 series, suitable for a variety of gas media, and plays a pressure control and protection role in the gas system. Pressure range: 5-150mbar adjustable, tolerance ≤5.0mbar. Maximum working pressure: 500mbar (stable operation in the overpressure zone). Protection level: IP54. Functional Features: one. Pressure monitoring mechanism Directly set the switch point (0.5mbar accuracy) by rotating the dial. Automatically cut off/convert the circuit when the pressure exceeds the limit, and the response time is <50ms. Two. Applicable media: 1/2/3 gas group and neutral gas. Electrical parameters: AC 24-250V/10A, DC 24-48V.

DUNGS pressure switch GW 500 A6

DUNGS pressure switch GW 500 A6 The GW 500 A6 is an adjustable compact pressure monitor for combustion equipment. Pressure range: adjustable range 100-500mbar, maximum working pressure 600mbar‌. Medium compatibility: suitable for gas 1/2/3 and other neutral gaseous media (such as air and flue gas). Core functions‌: Pressure monitoring and regulation Directly adjust the switch point (rated value) through the dial, no additional pressure gauge is required. Automatically turn on/off the circuit when the pressure exceeds or is lower than the set value to ensure system safety‌. Application scenarios: Pressure safety control of gas burners and boiler systems‌. Pressure monitoring and regulation of ventilation and air conditioning equipment‌.

ECLIPSE ignition needle 10002242-2

ECLIPSE ignition needle 10002242-2 ignition needle 10002242-2:Core ignition components specially designed for burners. Electrical characteristics: Compatible with standard burner ignition transformers, spark frequency adjustable (continuous/intermittent mode). Temperature resistance: The electrode tip can withstand short-term peak temperatures up to 3000°C, and the insulating layer is made of high-purity ceramic material. Core functions: one. High-voltage ignition Stable sparks are generated through the electrode gap (adjustable from 0.8 to 1.2mm) to directly ignite the gas/fuel mixture. Optimized spark intensity design to solve ignition difficulties in high-altitude or low-temperature environments. two. Durable design The electrode tip is made of nickel-chromium alloy or molybdenum disilicide, resistant to high-temperature oxidation and sulfide corrosion. Application scenarios: Automatic ignition systems for industrial boilers, hot air furnaces, and other gas/fuel equipment.

Honeywell solenoid valve VR420AB1002-0000

Honeywell solenoid valve VR420AB1002-0000 Model: VR420AB1002-0000 Valve Type: 3/4" diameter slow-opening solenoid valve, suitable for neutral media such as gas and air. Electrical Characteristics: 24V DC/AC standard voltage, protection class IP54. Core Functions: one. Servo Control Technology Adopting a pilot-operated structure, it uses a low-power electromagnetic coil to drive the main valve core, achieving stable opening and closing under low pressure difference conditions. The opening and closing response time is ≤ 2 seconds, making it suitable for systems requiring smooth flow regulation. two. Safety Design The valve body is made of nickel-plated brass, and the valve seat is sealed with PTFE. The temperature range is -20℃ to +60℃. It is equipped with a manual reset device, allowing the valve to be forcibly closed when power is off. Application Scenarios: Safety cut-off in gas supply systems for industrial burners. Air flow regulation in boilers and hot air furnaces.

REGO pressure reducing valve 597FB

REGO pressure reducing valve 597FB Brand and Model: American REGO original high-pressure gas pressure reducing valve, model 597FB (part of the 597 series high-pressure valves). Material and Interface: Cast iron valve body, 1/4" NPT threaded interface, suitable for DN8mm pipes. Pressure Range: Maximum inlet pressure: 17.2 Kgf/cm² (approximately 250 PSIG). Adjustable outlet pressure range: 0.7 - 2.1 Kgf/cm² (7 - 105 KPA). Flow Characteristics: Maximum flow rate 68 Kg/h (for liquefied gas conditions) or 60 Nm³/h (for gaseous media). Core Functions: one. Precise Pressure Regulation The oversized T-shaped handle, combined with a balanced pivot design, supports manual and precise adjustment of downstream pressure. The feedback spring accelerates pressure response, ensuring stability under dynamic working conditions. two. Durable Structure The fabric diaphragm uses reciprocating molding technology, which is wear-resistant and suitable for liquid phase media. The O-ring seal reduces vibration and noise at high flow rates. three. Convenient Maintenance The external nozzle can be quickly disassembled and cleaned, and a reserved pressure detection hole is provided for monitoring. The built-in balanced pivot ensures complete closure, preventing medium leakage.

RIELLO FS 20 electrode（3006943）

RIELLO FS 20 electrode（3006943） This electrode belongs to the RIELLO burner accessories, model FS 20 (No. 3006943), and is specially used for gas/fuel burner ignition and flame detection‌. ‌Electrical characteristics‌: Adapted to high-voltage ignition transformer (typical output 10-15kV), with adjustable spark gap range of 2.5-3.5mm‌. ‌Temperature resistance‌: The electrode head is insulated with alumina ceramic, with a short-term temperature resistance of up to 1600℃, and the metal part is nickel-chromium alloy corrosion-resistant design‌. ‌Core Functions‌: ‌one.High pressure ignition‌ Electric sparks are generated by tip discharge, and the gas/air mixture is directly ignited, with the ignition success rate ≥99.8% (standard working conditions). Optimize the electrode shape design to reduce the impact of carbon deposits on spark intensity‌. ‌two.Flame Detection‌ Used as an ionizing probe, the flame conductivity feedback combustion state is detected to the controller‌. Compatible with RIELLO's multiple burner control modules (such as LME series).

RIELLO ignition rod (3003796)

RIELLO ignition rod (3003796) ignition rod :This is the core ignition component of RIELLO burners, specially designed for oil/gas industrial burners, featuring high reliability and long service life. Function introduction: The function of this ignition rod is to work in conjunction with the ignition transformer. The ignition transformer generates high voltage, which discharges at the head of the ignition electrode, thereby igniting the fuel sprayed out by the burner and providing the initial flame source for the burner to ensure a smooth start of the combustion process. This component is usually used in conjunction with dedicated ignition cables and high-energy ignition boxes to form a complete ignition system, suitable for various RIELLO burner models such as RL28, RL38, RL44, RL50, RL70, RL100, and RL130.