DUNGS valve body motherboard（263636）

DUNGS valve body motherboard（263636） Valve body motherboard:is a valve body motherboard (main control module) used in gas control systems. It is usually used in conjunction with ‌DUNGS solenoid valves (such as MBC, MB series) and is suitable for industrial or commercial gas burners, boilers and gas regulation systems. The motherboard is responsible for controlling the switch, safety monitoring and fault protection of the solenoid valve to ensure the stable operation of the gas system. Main functions Solenoid valve control: drive and monitor dual solenoid valves (such as DN15-DN50 specifications) to ensure safe gas on and off. ‌Safety Protection‌: It has ‌flame monitoring, pressure detection, valve leakage detection (optional)‌ functions, and complies with EN 161 and other safety standards. ‌Fault Diagnosis‌: Provide ‌LED indicator lights or fault codes‌ to facilitate troubleshooting solenoid valve failures (such as coil open circuit, short circuit, valve jamming, etc.). ‌Compatibility‌: Adapt to DUNGS solenoid valves (such as MB/MBC series), supporting 230V AC or 24V DC power supply (depending on model). ‌Quick Response‌: Supports quick turn-off (<1s) and on (<20s), suitable for high dynamic gas regulation systems. Supply voltage: 230V AC (±10%), 50/60Hz or 24V DC. ‌Protection Level‌: IP54/IP65 (dust-proof and waterproof). ‌Operating temperature‌:-15°C ~ +70°C. Suitable for gas: natural gas, liquefied gas (LPG), urban gas, etc. Typical Application ‌Commercial/Industrial Burner‌ (boilers, hot air furnaces, drying equipment, etc.). ‌Gas pressure regulation system‌ (used in conjunction with DUNGS pressure regulator). Safe cut-off system (such as gas leakage protection, flame failure protection).