Product introduction
1. Ultra-Low Emission Design
Staged Combustion + FGR: Suppresses NOx formation in oxygen-lean zones, achieving emissions <30 mg/m³.
Premixed Surface Combustion: Metal fiber burners ensure uniform combustion, with CO emissions <10 mg/m³.
2. Smart Control & Energy Efficiency Optimization
Dynamic Load Adjustment: Real-time power modulation (20:1 turndown ratio) based on waste gas concentration, reducing natural gas consumption.
Deep Waste Heat Recovery: Heat exchangers lower exhaust temperatures to <150°C, achieving >90% thermal efficiency.
3. Safety & Reliability
Dual Flame Monitoring: UV + ionization electrode redundancy to prevent false flame failure signals.
Explosion-Proof Design: Complies with ATEX standards for hazardous areas (e.g., chemical/pharmaceutical plants).
Relevant parameters
📊 Typical Burner Selection Comparison
| Model/Brand | Power Range | Application | Key Features |
|---|---|---|---|
| EcoBurn EP-300F | 1.16–3.49 MW (1–3 million kcal/h) | RTO/VOCs Incineration | Staged combustion + ceramic liner (withstands 1350°C) |
| ZY BJ-ECO | 0.58–2.33 MW (0.5–2 million kcal/h) | Catalytic Oxidizers | Micro-pressure control, ±3°C accuracy |
| Honeywell UltraLoNOx | 0.35–1.75 MW (0.3–1.5 million kcal/h) | Biomass Gasification | Adapts to variable gas calorific values |
Typical Applications Include
1. Industrial Waste Gas Treatment Systems
Regenerative Thermal Oxidizer (RTO)
Application: Treats VOCs (Volatile Organic Compounds) emissions from industries such as painting, printing, and chemical processing (e.g., benzene, esters).
Technical Requirements: Burners must support high temperatures (800–1200°C), low-NOx combustion (NOx <50 mg/m³), and integrate FGR (Flue Gas Recirculation) technology.
Case Study: A 2.34 million kcal/h burner in an automotive coating line achieves >99% VOCs removal and ≥85% waste heat recovery.
Catalytic Oxidizer (CO)
Application: Decomposes low-concentration VOCs at medium-low temperatures (200–400°C), e.g., cleaning solvent emissions from electronics factories.
Technical Requirements: Precise temperature control (±5°C) to prevent catalyst deactivation.
2. Hazardous Waste Disposal
Rotary Kiln Incinerators
Application: Treats medical waste, waste solvents, etc., requiring combustion temperatures ≥1100°C to ensure dioxin decomposition.
Technical Requirements: Corrosion-resistant burners (e.g., 310S stainless steel) with emergency cooling systems.
3. Flue Gas Desulfurization & Denitrification (FGD/SCR) Support
Hot Air Furnace Systems
Application: Supplies high-temperature air (300–400°C) to SCR reactors for NOx reduction.
Technical Requirements: Burners must enable rapid start-stop to adapt to power plant load fluctuations.
4. Biomass Energy Utilization
Biomass Gasifiers
Application: Converts agricultural/forestry waste into combustible gas; burners must adapt to low-calorific-value gas (4–6 MJ/m³).
Technical Requirements: Multi-stage air distribution to prevent slagging and dual-fuel compatibility (gas/biomass).
Technical Service
We welcome customers at home and abroad to visit our factory to reach long-term cooperation and create success together.
Customer Voice
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Heating system for environmental protection equipment
Product Model：
Download File：
Ask For A Quick Quote
We will contact you within 24 hours. Please note your email. Would you like to know more about our products or services? Please fill in the form. Alternatively, you can send us a detailed list of requirements.
Shipping If the order is not very large, we can send it to you by courier, such as TNT, DHL, UPS or EMS. If the order quantity is large, we will suggest you to use air or sea freight through your appointed freight forwarder. Our long-term cooperative agents are also available.
Related FAQ
Q1.Are you a factory or trading company?
A1: We are the original manufacturer.
Q2: ls there any stock?
A2: Most of our products have stocks.
Q3: How about the Shipping method?
A3: DHL/UPS/TNT/Fedex and other express for samples delivery, mass production will be sendby sea or by train.
Q4: How many years warranty?
A4: Our products are high quality and durable, our warranty are one year normally
Q5: How to choose suitble bumner for myself?
A5: Usually according to combustion output capacity. You can provide relevent parameters ofcombustion output such as :104xkcal/h, kw/h,kg/h,then we will recommend the model which is themost suitable for you, as the combustion output you provide.
Q6:How about samples ?
A6: We are willing to offer samples.
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China