Schneider shampoo actuator STAB B0.3618 2N36 L

Schneider shampoo actuator STAB B0.3618 2N36 L STAB B0.3618 2N36 L (is a high-precision electric actuator specially designed for industrial combustion systems. It is mainly used to control damper opening to optimize combustion efficiency and safety. Power supply type: Supports 230V AC/50Hz standard power supply, compatible with industrial environment requirements. Protection level: IP40 (dust-proof, vertical drip-proof), adapts to conventional industrial scenarios, but needs to avoid high humidity or dust-intensive environments. Core functions: one. Multi-cam segment control Low-combustion/high-combustion switching: The positions of low-combustion and high-combustion air doors are set separately through independent cams, such as the yellow cam (ST1) corresponding to the small fire state (recommended scales 30~40), and the red cam (ST2) corresponding to the large fire state (recommended scales 60~70). The two can be accurately switched through mechanical limits. Solenoid valve linkage: The blue cam (MV) is linked to the main gas solenoid valve to ensure that the damper opening and gas flow are adjusted simultaneously to avoid the risk of fire. Two. Manual adjustment and mechanical protection Convenience of on-site debugging: The cam can be manually rotated without powering up, and the damper position is intuitively set through the dial, which is suitable for fine calibration in the early stages of installation. three.High precision control and reliability Quick response: 90° stroke time ≤150 seconds to ensure timely adjustments under dynamic working conditions. Application scenario: It is specially optimized for gas/fuel burner damper control, which can achieve accurate adjustment of air-fuel ratio. Gas combustion engine: adjusts the amount of combustion air, optimizes combustion efficiency, and reduces NOx emissions.