Honeywell fame amplifier R7861 A 1026

Honeywell fame amplifier R7861 A 1026 R7861 A 1026 is a key device for flame monitoring systems. It is mainly used to amplify flame detection signals and output flame status signals to ensure the safe and stable operation of the combustion system. Electrical parameters: The operating voltage is 220V and 110V, the power is 12VA, and the contact capacity is 2A, which can adapt to different circuit systems. Switch configuration: It has two sets of passive switches, including a normally closed switch and a normally open switch, which can output the corresponding switching signal according to the flame state. Functions: flame signal amplification, flame state judgment and output, safety protection, status display, etc.

SUNTEC oil pump AS47A

SUNTEC oil pump AS47A AS47A is an internal gear pump, commonly used in fuel heating systems, adapted to a variety of light oil fuels, has pressure regulation and quick cutoff functions, and can work stably in single-tube or double-tube systems. The AS47A is a light oil/kerosene special model with built-in voltage regulation function, with integrated solenoid valve and pressure regulator. The working pressure is: 7-14bar, the power consumption is 9W, and the suitable fuel viscosity is 2-12mm²/s (cSt), and the temperature is 0-60℃. Maximum inlet pressure is 2bar, vacuum degree limit is 0.45bar. Function: Built-in gear pair transmission structure, providing adjustable output pressure of 7-14 bar. The integrated solenoid valve realizes rapid fuel cut-off control and supports single-tube (oil inlet only) or double-tube (oil inlet + oil return) operating mode. Built-in 150μm precision filter ring and pressure regulator, with dual protection of voltage stabilization and emergency cutoff. Typical application: Suitable for fuel boosting conveying of industrial burners, boilers and other equipment. Common supporting models include AS47A1536, AS47A7432, etc.

SUNTER oil pump 1538p07UC10 ( AS47C )

SUNTER oil pump 1538p07UC10 ( AS47C ) 1538p07UC10 ( AS47C ):It is an original French diesel burner oil pump. Rotation direction and oil outlet: From the shaft end, it rotates counterclockwise, and oil is emitted on the left. Structural features: It is an internal meshing gear pump, with a built-in solenoid valve, and can be used in single-tube or double-tube systems. Interface specifications: The import and return ports are usually G1/4 interfaces, and the nozzle outlet is G1/8 interfaces. Working pressure: The pressure range of the nozzle is 7-14bars. Applicable fuel: Applicable fuel working viscosity is 2-12mm²/s, and the fuel temperature is 0-60ºC (in the oil pump). Other parameters: power consumption is about 9W, torque is 0.10N.m, shaft diameter is 8mm, protection level is IP54. Core functions: Integrated solenoid valve realizes rapid fuel cut-off control and supports single-tube/dual-tube operation mode. Built-in pressure regulator (adjustable from 7-14 bar) and emergency cut-off protection function. Standard 150μm precision filter ring, suitable for light oil/kerosene media. Typical Application: It is equipped with burners such as RIELLO and WEISHAUPT. Common models in the same series include AS47C1538, AS47C1554, etc.

SUNTEC oil pump E7NC10697P (3003156)

SUNTEC oil pump E7NC10697P (3003156) E7NC10697P is an oil pump used for fuel combustion systems. It is suitable for heavy oil and other media. It has pressure regulation, filtration and other functions, and can work in single-tube or double-tube systems. Scope of application: Fuel combustion systems used in fuel burners or oil and gas dual-purpose burners, kerosene or diesel can be used. Structural features: The pump body is closed and combined with the pressure regulator and hydraulic valve, and the single or double pipe oil supply can be changed by yourself. Pressure range: Pressure range is 10-30bar. Working viscosity and temperature: The working viscosity is 2.8-450mm²/s, and the fuel temperature is 0-120ºC (in the oil pump). Filtration function: With built-in filter ring, filtering accuracy of 170μm, it can filter impurities in fuel oil to ensure clean fuel. Function: Stabilize fuel delivery, pressure regulation, adapt to different oil supply systems, impurity filtration, and adapt to multiple fuels.

SIEMENS servo motor SQM33.411A9

SIEMENS servo motor SQM33.411A9 German SIEMENS brand burner special servo motor belongs to the SQM33 series damper actuator‌. Mainly used for damper/valve ratio adjustment control of industrial burners‌. Motion Control: Supports clockwise/counterclockwise bidirectional rotation, with a maximum torque of 40Nm‌. The rotation angle range is 160°, and the running time is adjustable in 15-60 seconds. Signal interaction: Equipped with 6 auxiliary switches and feedback signal output interfaces‌. Compatible with analog quantity control (2-10V/4-20mA). Electrical characteristics: 24V DC power supply, 10W rated power‌. Protection level IP54, adapts to normal temperature working environment‌. Quick-mounted installation structure‌.

SIEMENS servo motor SQM56.687A2

SIEMENS servo motor SQM56.687A2 SQM56.687A2 is a damper actuator designed for medium and large burners, with high precision control and reliable performance. Motion Control: Bidirectional rotation (clockwise/counterclockwise), maximum torque of 40Nm. The running time is adjustable for 10-90 seconds, and supports 90° or 130° angle adjustment. Voltage and protection: The power supply voltage is 220-240V AC, protection level IP54, can resist dust and water splashes, and is pressure-resistant and thermoplastic shell. Built-in 8 auxiliary switches (including 2 limit switches) and position feedback module. Supports proportional adjustment design and is compatible with analog signal feedback. Typical Application Gas/air damper drive (industrial boiler, combustion machine) It is necessary to cooperate with SIEMENS combustion controller to achieve precise air-fuel ratio control. Functions: Accurate damper drive, analog control and feedback, safety limit and protection, installation flexibility.

SIEMENS controller LAL1.25

SIEMENS controller LAL1.25 LAL1.25 is a controller for fuel burners, mainly used to control and monitor medium to large fuel burners, suitable for intermittent operation modes. It belongs to the LAL... series program controller, adapted to spray oil combustion system. Control type: Supports multi-stage or proportional adjustment burner control. Suitable for spray oil burners and stationary air preheaters Flame monitoring: It can be used with a blue flame detector (QRC1...) or a photosensitive tube detector (QRB1...) to achieve flame monitoring. Suitable for yellow and blue flame burners.

Alledosieren medicine pump VT05006PH1A6000

Alledosieren medicine pump VT05006PH1A6000 V‌: V series. ‌T‌: Cycle time control. 05006 is the addition parameter, P means that the pump head is polypropylene, H means that the sealing material is nitrile rubber, 1 means that there is no relay, 6 means that the hose connection size is 6mm, 0 means that there is no valve spring, 0 means that the single-adjustment stroke frequency, and 1 means that the accessories are standard. Flow accuracy‌: ±1% repetition accuracy, 160 stroke frequency/min stroke frequency. Corrosion resistance: PP pump head + PTFE diaphragm + ceramic ball valve combination, suitable for acid and alkaline media. ‌Control method‌: Supports panel button adjustment or external 4-20mA signal control. ‌Protection Level‌: IP65, ACEH/PC shell has better weather resistance than ABS. Standard diaphragm damage protection mechanism.

Baltur gas burner TBG 80LX ME

Baltur gas burner TBG 80LX ME TBG 80LX ME is a two-stage fire gas burner that uses flue gas recirculation technology and has the characteristics of low nitrogen emissions and proportional adjustment. It is suitable for boilers and other equipment. The fuel is gas, the heat generation is 80, the gas supply pressure is 6-10KPA, combustion type: two sections of fire gas combustion. Control method: electronic proportional adjustment, support automatic damper control Main functions: low nitrogen combustion, proportional regulation operation, flame detection and safety protection, convenient maintenance, flexible installation, low noise operation.

Danfoss differential pressure switch RT260A (017D002166)

Danfoss differential pressure switch RT260A (017D002166) The RT260A is a pressure control device applied in industrial and marine refrigeration fields, featuring high-precision pressure monitoring and automatic protection functions. Differential pressure range: 0.50 - 4.00 bar, with automatic reset support. Pressure interface: G3/8 thread, working pressure 22.0 bar. Protection grade: IP66, with a metal cast aluminum housing, suitable for harsh environments. Functional features: one. Safety control Single-pole changeover switch design, trigger point determined by pressure difference. Integrated automatic reset function, no manual intervention required. two. Electrical performance Supports 0.2 - 2.5 mm² wire connection, pollution degree 3. Rated pulse voltage 4kV, short-circuit protection 10A. Application fields: Pressure monitoring in ammonia refrigeration systems. Energy-saving control in marine and industrial equipment.

Danfoss oil mouth 0.85 60° solid

Danfoss oil mouth 0.85 60° solid Oil mouth 0.85 60° solid:It is an accessory suitable for fuel burners, specially designed for industrial burners and belongs to the OD series of oil nozzles. Flow specification: 0.85 USgal/h ‌Atomization Angle‌: 60 degree solid cone jet (S-type atomization) ‌Applicable oil products‌: Light oil/heavy oil (diesel fuel) Model: RT260A Pressure difference range: 0.50-4.00 bar Protection level: IP66 Functional Features:‌ Atomization control Solid flame mode ensures combustion stability and is suitable for small and medium-sized combustion engines. Copper body + precision filter structure to prevent impurities from being blocked.

Danfoss oil mouth 31.5 60° semi-solid

Danfoss oil mouth 31.5 60° semi-solid Oil mouth 31.5 60° semi-solid:This is the standard model of Danfoss OD series fuel atomizing nozzles, specially designed for medium and large industrial burners. Model meaning: "31.5" indicates the nozzle's flow rate, which is typically 31.5 USgal/h at a specific pressure; "60°" refers to the spray angle; "semi-solid" represents the spray pattern. Flow specification: 31.5 USgal/h Atomization angle: 60° semi-solid cone spray (between solid and hollow) Applicable oil: Light oil/Heavy oil (requires a 140μm Monel alloy filter) Functional features: Atomization control: The semi-solid flame mode balances combustion efficiency and stability, suitable for boiler systems. Typical applications: Industrial boiler burner matching. Commercial heating systems (requires matching with nozzles of other angles from 30° to 80°)

REGO pressure reducing valve LV4403B4

REGO pressure reducing valve LV4403B4 LV4403B4 is a medium and low pressure gas pressure reducing valve, mainly used for the pressure regulation of liquefied petroleum gas, and has the characteristics of accurate pressure control and fast response speed. The inlet is 1/2"F.NPT, the outlet is 1/2"F.NPT, the pressure adjustable range is 228-330mmW.C, and the flow is about 21kg/hr. Applicable media: LPG (liquefied petroleum gas), LNG (natural gas) and non-corrosive gas. Main functions: precise pressure regulation, quick response, wide application range, easy installation.

REGO pressure reducing valve LV4403B66

REGO pressure reducing valve LV4403B66 LV4403B66 is an industrial-grade gas pressure regulator produced by REGO, the United States. It is specially designed for liquefied petroleum gas (LPG) systems and is suitable for commercial, industrial and residential gas scenarios. Pressure range: Maximum inlet pressure 2kg/cm², outlet adjustable range 228-330mm water column (approximately 0.023-0.033kg/cm²) ‌Flow specification‌: approximately 15kg/h, adapted to 3/4" F.NPT pipeline interface. Applicable media: LPG, natural gas (LNG) and non-corrosive gases. Functional Features: ‌one.Structural Design‌ Cast zinc valve body + brass nozzle, built-in woven film and reciprocating die technology to improve durability and sealing. The external nozzle is designed for easy maintenance and is equipped with a UL standard filter to prevent impurities from being blocked. ‌two.Pressure regulation control‌ The balanced pivot structure ensures complete closing, feedback spring accelerated pressure response. Reserve downstream pressure detection holes to support real-time monitoring.

REGO pressure reducing valve LV5503B6

REGO pressure reducing valve LV5503B6 LV5503B6 is an industrial-grade gas pressure regulator produced by the REGO brand in the United States. It is specially designed for liquefied petroleum gas (LPG) and natural gas systems, and is suitable for commercial and industrial gas scenarios. Interface specifications: 3/4" F.NPT import and export threads‌. Pressure range: Maximum inlet pressure 2kg/cm², outlet adjustable range 2.4-3.3kPa (approximately 228-330mm water column) ‌Flow capacity‌: 35kg/h, adapted to medium and high pressure gas delivery needs‌. Applicable media: LPG, natural gas, nitrogen and other non-corrosive gases‌. Functional Features: ‌one. Precision pressure regulating structure‌ The woven film is combined with reciprocating pressing technology to improve durability and sealing. The built-in balance pivot design ensures full closing, and the external nozzle supports quick maintenance‌. ‌two. Intelligent Response System‌ The feedback spring accelerates the downstream pressure response, and reserves detection holes to monitor the pressure status in real time‌. Comply with US UL standards and equipped with a filter to prevent impurities from clogging‌.

RIELLO motor 603SE 90W (3008489)

RIELLO motor 603SE 90W (3008489) Product code: 3008489 Category: Burner accessories Motor 603SE :It is a compact motor designed for industrial equipment. Power: 90W, adapted to low-voltage DC or AC power supply systems. ‌Structure: adopts a brushless design, built-in permanent magnet rotor and stator armature winding, supporting three-phase power supply. ‌Control method‌: Supports FOC vector control, and can be adjusted through PWM or analog signals. Functional Features: ‌one.Efficient operation‌ Efficiency up to 55-68%, low noise design, suitable for precision equipment. Stepless speed regulation has a wide range (50-2500r/min), and smooth commutation. ‌two.Smart Control‌ Supports single-resistance/three-resistance current sampling, integrated weak magnetic control and torque compensation.

Steinen oil mouth 18.00 60°SS

Steinen oil mouth 18.00 60°SS Oil mouth 18.00 60°SS:It is a stainless steel fuel injector designed for industrial burners, mainly used for atomization injection of diesel fuel. "18.00" in the model represents flow rate or aperture specifications, and "60°SS" indicates that the spray cone angle is 60 degrees. It belongs to the Steinen burner accessories series, suitable for a variety of industrial combustion engine models‌. Functional Features: ‌Atomization Performance‌: Accelerate efficient atomization of fuel through precision design to ensure combustion adequacy and flame stability‌. ‌Durability‌: Stainless steel is resistant to high temperature corrosion and is suitable for long-term high-pressure environments. ‌Compatibility‌: Can match Steinen and other brands of burners, and support multiple models of replacement‌. Application scenario: Widely used in industrial combustion equipment such as boilers and kilns‌.

RIELLO ignition rod （3003851）

RIELLO ignition rod （3003851） Category: Burner accessories Product number:3003851 Mainly used in gas/fuel burners ignition systems‌. High-voltage electric sparks are generated by a built-in ignition transformer (secondary 8kV/30mA), which directly ignites gas or atomizes fuel, ensuring the burner starts quickly‌. Made of high-temperature resistant materials, it can adapt to the high-temperature working environment of the burner and has high stability for long-term use. Commonly used in burners such as the Liya Road 40 series, RL series, etc., it works in conjunction with program controllers (such as RMO503SE) to realize automated ignition process‌.

Weishaupt gas burner WM-G10-1-A

Weishaupt gas burner WM-G10-1-A W-series gas burners belonging to Weishaupt. Type: WM-G10-1-A Supply pressure: 15~500mbar Fuel type: gas (natural gas/liquefied gas, etc.) Adjustment method: proportional adjustment (supports first-level or second-level adjustment) Functional Features: ‌Efficient combustion control The digital program controller is used to accurately adjust the mixing ratio of fuel and air to ensure combustion efficiency and safety. ‌ ‌Low nitrogen emission design‌ Some models (such as WM-G10/4-A/ZM) reduce nitrogen oxide emissions through optimized combustion technology and meet environmental protection requirements. ‌ ‌Convenience The components are compact, and the fuel and air conditioning devices are exposed, making them easy to maintain everyday. ‌Security Configuration‌ Equipped with safety devices such as air pressure switches, ion electrodes, etc., to monitor the combustion status in real time to avoid safety hazards.

Weishaupt filter WF 510-1

Weishaupt filter WF 510-1 Category: Burner accessories WF 510-1:It is a high-efficiency fuel filtration equipment made by the German Weishaupt brand. Model: WF 510-1 Structural form: adopts a quick-release filter cartridge design, supporting single-core or multi-core parallel connection (common 3-core/5-core configuration). Functions: fuel purification, corrosion resistance design, and maintenance convenience.