SIEMENS control box LMV37.410A2WH
SIEMENS control box LMV37.410A2WH Model: LMV37.410A2WH LMV37.410A2WH is a microprocessor-controlled combustion management system designed for medium and high power burners. The core functions include combustion process automation control, safety interlocking and air-fuel ratio optimization. Electrical characteristics: Supply voltage 230VAC±10%, frequency 50-60Hz Operating temperature range -20°C~60°C Mechanical characteristics: compact design, plastic housing, clamped mounting structure. Core functions Intelligent combustion control: Integrated eBUS communication protocol, support remote monitoring and parameter configuration With flame monitoring function, real-time feedback on combustion status Support proportional adjustment (PID control), air-fuel ratio accuracy ±2% Safety protection system: Dual-channel safety circuit design TSA (safe time monitoring) function, automatic fuel cutoff after timeout Device compatibility: Designed for Weishaupt burners (WM-L/G/GL series) Supporting servo motors, solenoid valves and other actuators Typical configuration: Fuel burner: WM-L10/L20/L30 Gas burner: WM-G10/G20/G30
RIELLO distributor (3013776) Category: Burner accessories This model is mainly used for gas or fuel distribution control. Core functions: Precise fuel distribution It adopts a modular design and can be adapted to Riello burners of different powers (such as the RS series), and accurately controls fuel flow through the regulating valve group. Efficient combustion support Works in conjunction with Riello burner technology to optimize combustion efficiency and reduce energy consumption. Industrial reliability Suitable for high-demand scenarios such as automobile manufacturing and rail transit, it has high temperature resistance and anti-interference design to ensure long-term and stable operation. Compatibility Extensions It can be used with Riello controllers (such as RMO503SE, MMI series) to achieve automated control, and supports multiple fuel types (natural gas, liquefied gas, etc.)
RIELLO distributor (3013776) Category: Burner accessories Core functions one.Fuel Distribution Control: Designed specifically for GULLIVER series burners (RG2/RG3/RG4S and other models), it realizes multi-channel precision distribution of fuel/gas. Built-in mechanical regulating valve group, supports intermittent operation mode, pre-purging time 12 seconds, and ignition waiting time 8 seconds. two.System compatibility: It is adapted to SIEMENS controller (AGQ3.1A27, 503SE and other models), and can be used with the GW/1G/2G models of PRESS series burners. Supports signal interaction with controllers such as RMO503SE, MG557/3, and meets the single-stage/dual-stage combustion needs. three.Industrial reliability: It is made of corrosion-resistant alloy material, with a working temperature range of -40℃~100℃, and a protection level of IP40, which is suitable for harsh environments such as boilers and drying lines.
SIEMENS control box LOK16.250A27
SIEMENS control box LOK16.250A27 LOK16.250A27 is an intelligent combustion controller specially designed for fuel burners by SIEMENS, and belongs to the core model of the LOK16 series. Core functions one.Multi-fuel control Designed for forced ventilation large and medium-sized burners, it supports fuel/gas multi-stage adjustment and proportional continuous adjustment mode, and the main voltage is compatible with AC220V-240V (±10%). two.Intelligent security monitoring Integrated self-test flame signal amplifier (silicon photodetector RAR9). Monitor flame signals in real time and can identify 16 types of faults such as detector failures, cable abnormalities, and false flames. Equipped with an air pressure sensor to realize closed-loop control of the damper baffle. three.Industrial reliability Protection level IP40 (prevent solid particles from invasion). Working temperature -20℃~+60℃. Frequency range: 50/60Hz.
Steinen oil mouth 0.60 60°S 0.60 60°S:A solid cone atomization nozzle designed for small and medium-sized fuel burners realizes efficient atomization and stable combustion of fuel, and is widely used in industrial boilers, furnaces and hot air furnaces and other equipment. Core functions: efficient combustion control, pressure regulation and stability, safety and reliability. Spray angle: 60° solid cone. Applicable fuels: diesel (EN 590), heavy oil (ISO 8217), biodiesel.
Steinen oil mouth 1.00 60°S 1.00 60°S:Solid cone atomizing nozzle designed for medium and high load fuel burners belongs to its classic "Dyna-Coin" series. This model achieves efficient atomization and stable combustion of fuel through precision mechanical processing and surface treatment processes, and is widely used in industrial boilers, furnaces and hot air furnaces and other equipment. Traffic: 1.00 GPH. Working pressure: inlet 1.0-1.4MPa; outlet 5-15mbar. Spray angle: 60° solid cone. Suitable fuels: diesel (EN 590), heavy oil (ISO 8217), biodiesel. Core functions: efficient combustion control, pressure regulation and stability, safety and reliability.
Steinen oil mouth 1.25 60°S 1.25 60°S:A solid cone atomization nozzle designed for medium and high load fuel combustion systems. This model achieves efficient atomization and stable combustion of fuel through precision cold forging technology and stainless steel material. It is widely used in industrial boilers, furnaces, ship auxiliary machines and other equipment. Traffic: 1.25 GPH. Spray angle: 60° solid cone. Working pressure: inlet 1.0-1.4MPa; outlet 5-15mbar. Suitable fuels: diesel (EN 590), heavy oil (ISO 8217), biodiesel. Core functions: efficient combustion control, pressure regulation and stability, safety and reliability.
SUNTEC oil pump AS47A 7432-4 AS47A 7432-4:It is an internal meshing gear pump designed by SUNTEC, France, for small and medium fuel combustion systems, and belongs to the AS series standard model. This product realizes stable delivery and precise control of fuel through built-in solenoid valves and pressure adjustment modules, and is widely used in industrial boilers, hot air furnaces and burner equipment. Traffic: 47 L/h (12.4 GPH) Working pressure: inlet 8-20 bar; outlet 7-14 bar. Applicable fuels: diesel (EN 590), biodiesel (B10), kerosene. Interface specifications: Oil inlet/return port: G1/4 thread; nozzle outlet: G1/8. Core functions: efficient fuel delivery, intelligent pressure control, safety and reliability. Typical application scenarios: Burner equipment: adapted to small and medium-sized burners such as RIELLO RL70, BALTUR G30, etc.
SUNTEC Oil pump CJM6AB(1000-4Z)
SUNTEC Oil pump CJM6AB(1000-4Z) CJM6AB (1000-4Z) is an internal meshing gear pump designed by SUNTEC, France, for small and medium-sized fuel combustion systems. This model achieves stable fuel delivery and precise control through the combination of precision gear pairs and pressure adjustment modules. It is widely used in industrial boilers, hot air furnaces and burner equipment. Flow: 6 L/min (360 L/h) Working pressure: Inlet 10-30 bar; outlet 12 bar. Applicable fuels: diesel (EN 590), biodiesel (B10), kerosene. Interface specifications: Oil inlet/return port: G1/4 thread; nozzle outlet: G1/8. Core functions: efficient fuel delivery, intelligent pressure control, safety and reliability. Typical application scenarios: Burner equipment: adapted to small and medium-sized burners such as RIELLO RL70, BALTUR G30, and NOx emissions can be controlled below 150ppm.
Fireye controller SB560322AA SB560322AA is an ultraviolet flame detection controller specially used for boiler burner systems. It adopts a vertical structure design. The core function is to monitor the flame status in real time through ultraviolet (UV) detection technology to ensure the safe and stable operation of combustion equipment. Main features one. Application scenarios: Suitable for gas/oil and gas burner systems, integrated into industrial boilers and other equipment, providing high-precision flame detection. two.Technical Design Vertical structure, adapted to standard burner installation requirements, has anti-interference ability and stability. three.Safety control Automatically verify the existence of the flame to prevent accidental fire out, support fault diagnosis function, and improve combustion efficiency and safety. Extended features It can work in conjunction with other Fireye combustion controllers (such as 45UV5 and 55UV5 series) to achieve more complex automation control of combustion systems. Typical operating voltage is 120V or 240V AC, compatible with 50/60Hz power supply, adapting to industrial environment needs.
Fireye controller base 61-6990-2（SB22194）
Fireye controller base 61-6990-2（SB22194） 61-6990-2 (SB22194) is a mounting base specially designed for Fireye series combustion controllers. It is mainly used to fix and connect flame detectors or combustion controllers to ensure the stable integration and signal transmission of the equipment in industrial combustion systems. Core functions one.Electrical connection and protection Terminal interface: Built-in multiple sets of wiring terminals, which can connect fuel valve control lines, flame sensor signals, power inputs, etc. to ensure stable signal transmission. Protection level: The enclosed design provides basic dust and moisture resistance, which is suitable for long-term use in industrial environments. Anti-interference: Reduce electromagnetic interference through reasonable circuit layout and ensure reliable communication between the controller and external devices. two.Mechanical Support and Compatibility Modular adaptation: Directly compatible with Fireye SB series controllers such as SB560322AA, supports plug-and-play installation without additional tools. three. System integration and scalability Expansion capability: Supports use with external terminal expansion base (such as SB22195) to meet the multi-loop control needs of complex systems. Application scenario: As a supporting base for Fireye SB series controllers (such as SB560322AA), it is used to connect external equipment such as burners, fuel valves, sensors, etc., and is suitable for gas, fuel or mixed fuel combustion systems.
Fireye fire detection eye UV7R4
Fireye fire detection eye UV7R4 UV7R4 is an ultraviolet flame detector specially designed for gas/fuel burners. It adopts a 90° right-angle structure. The core function is to monitor the flame status in real time through high-sensitivity ultraviolet (UV) sensing technology to ensure the safe operation of industrial combustion systems. Main features one. Flame monitoring: Detecting the ultraviolet rays generated by the flame burning 185-260nm, which is highly responsive to the rapid start-stop cycle of gas or fuel flames. Built-in fault detection mechanism, automatically checks the probe short-circuit or "out of control" status at the beginning and end of each flame cycle. two.Structural Design: 90° right-angle probe design, suitable for installation environments of narrow or special angles. 1830mm unshielded wire is standard and supports reverse connection protection. Installation Flexibility: 1/2" NPT threaded connector adapts to standard piping accessories, adjusting installation angles to optimize flame monitoring field of view. Applicable temperature: -40°C to 85°C. Core functions: flame detection and signal output, anti-interference and reliability design, system integration and compatibility. Application scenarios: Scenarios where industrial boilers, gas burners, etc. require high-frequency ceasefire monitoring. Can be used with Fireye multi-burner control systems (such as MB series) or single-burner control modules (such as SB series).
Azbil flame probe AUD15C1000 AUD15C1000 is an ultraviolet flame detector developed by AZBIL in Japan. It is specially used for flame monitoring of fuel/gas burners, and has high environmental tolerance and safety self-test functions. Core functions one.UV flame detection The flame is detected through the 185-260nm ultraviolet band, and is adapted to combustion equipment that operates intermittently, with fast response and strong anti-interference. two.Safety Control It is linked with dedicated controllers (such as AUR300C/AUR400C series), supports dynamic self-test function, and diagnoses probe faults in real time (such as short circuit or signal abnormality). three. Environmentally resistant design It withstands up to 120℃ high temperature, IP65 protection level, suitable for outdoor or high dust environments. Technical Features Compatibility: It must be used with a special base (such as AUD100C1000), and supports wire type (AUD100) or terminal type (AUD110). Application scenarios: Flame monitoring systems that require explosion-proof design, such as industrial boilers, gas burners, etc.
Azbil flame detector AUD300C1000
Azbil flame detector AUD300C1000 AUD300C1000 is an advanced ultraviolet flame detector developed by Japan's azbil. It is designed for continuous/intermittent operation of oil and gas burners. It detects flames through the 185-260nm ultraviolet band, and integrates dynamic self-test functions to ensure safe control of industrial combustion systems. Core functions: high reliability flame monitoring, environmental resistance design, and convenient maintenance. Power supply voltage: 120/240V AC (50/60Hz). Temperature range: -20°C to +100°C. Protection level: IP66 dustproof and waterproof (under wiring connection), can resist dust, moisture and rainwater intrusion. Application scenarios Flame safety monitoring systems that require explosion-proof design, such as industrial boilers, gas turbines, etc. Used in conjunction with special controllers (such as the AUR300C series) to form closed-loop safety control.
Azbil controller ECM3000G910C ECM3000G910C is a proportional control servo motor under Azbil. It is specially designed for burner damper adjustment, and can achieve efficient combustion management through precise control of air-fuel ratios. Core functions one.Proportional adjustment Driven by 230V voltage, supports linear displacement feedback, and can be adapted to the damper opening control of the gas/fuel burner to ensure dynamic optimization of the air-fuel ratio. two.Safety linkage Built-in windproof function, working in conjunction with burner controllers (such as LMG series), adjusting damper position in real time through electrical signals to prevent instability in combustion. three.Industrial compatibility It is suitable for single-stage or two-stage fire combustion systems, with a typical output covering up to 350kW, meeting the needs of boilers, industrial heating equipment and other scenarios. Technical Features Structural design: Right-angle installation interface, adapted to compact space, and the protection level meets industrial equipment standards. Control Accuracy: Digital signal processing technology ensures fast and stable program control response.
SUNTEC oil pump AS47C 1538-6 AS47C1538-6 is an internal meshing gear pump specially designed for burners. It belongs to the AS series fuel delivery equipment and is suitable for a variety of liquid fuels (light oil, heavy oil, bio-oil, etc.), and is widely used in commercial and industrial combustion systems. Core functions Fuel delivery and pressure regulation Working viscosity covers 2.8-200 mm²/s (cSt), supports dynamic adjustment to meet different burner needs. Built-in pressure regulating valve can be adapted to proportional adjustment system, optimize combustion efficiency and reduce pollutant emissions. Compatibility Design The flange interface is standardized and adapted to mainstream burner brands such as RIELLO, WEISHAUPT, BALTUR, etc. Supports high speed operation of 3600 rpm, maximum inlet pressure of 1.5 bar, and oil temperature resistance range of 0-90℃. Electrical characteristics: electromagnetic drive, adapted to standard burner control system. Application scenarios Fuel supply system for industrial boilers, hot air furnaces and central air conditioners. Intermittent combustion equipment requiring high stability fuel delivery.
SUNTEC oil pump E7NCK10698P E7NCK10698P is a high-pressure gear pump designed by SUNTEC, France, designed for heavy oil combustion systems, with industrial-grade corrosion resistance and high viscosity fuel adaptability. Core functions one.High pressure fuel delivery Supports viscosity range of 2.8-200 mm²/s (cSt), and is suitable for high viscosity fuels such as heavy oil and bio-oil. Built-in pressure regulating valve can dynamically adjust the output pressure to meet the requirements of the burner air-fuel ratio optimization. two.Industrial compatibility The flange interface is standardized and compatible with mainstream burner brands such as RIELLO and BALTUR. High temperature resistance design (0-90℃), maximum inlet pressure of 1.5 bar, high speed operation of 3600 rpm. Electrical characteristics: electromagnetic drive, integrated into the burner control system. Application scenarios Heavy oil supply system for industrial boilers and hot air furnaces. Intermittent combustion equipment that requires stable high-pressure transportation.
Baltur gas burner BT30G BT30G is an industrial-grade gas combustion equipment. Single-section fire design, adapted to natural gas or liquefied gas. Gas pressure range is 2000-2800Pa, and consumption is 20-28m³/h. Core functions: one.Mixed Combustion Technology The air and gas are premixed in the combustion head, and combustion parameters can be optimized by adjusting the combustion air and the combustion head. two. Convenient maintenance design The burner can be removed directly without disassembly and installed with an ionizing electrode flame detection system. three.Operation control mode Single-section fire manually adjusts air flow. The progressive/proportional type uses a servo motor to synchronously control the gas and air supply, and automatically close the damper during suspension to reduce heat loss. Safety and protection: one. It comes standard with IP40 electrical protection level, plastic cover protection, and integrated sound silencer device at the air inlet. Two. Triple structure design (some models) enhances flame stability, and the duty torch prevents fire out.
Bentone Motor O1A095-065P0025-030-001OF0-617
Bentone Motor O1A095-065P0025-030-001OF0-617 Category: Burner accessories Model: O1A095-065P0025-030-001OF0-617 Brand: Bentone Power output: It may support precise speed regulation and adapt to inverter control. Feedback system: Some high-end models integrate position detection functions (such as single-cable technology of AL8000 linear motors). Protection Level: Industrial-grade IP protection. Structural features: If single-cable technology is used, the position detection function may be integrated to simplify the equipment installation process (similar to the design of the AL8000 series linear motor); if it is a modular design, it may support the integration of asynchronous motor drives and has harsh environmental adaptability.
RIELLO gas burner RS 410-M BLU+CBF65(3970147)
RIELLO gas burner RS 410-M BLU+CBF65(3970147) Category: Burner Bartour RS 410-M BLU with valve is a low-nitrogen gas burner specially designed for industrial heating equipment, with an integrated gas valve group, suitable for hot water boilers, steam boilers and thermal oil furnaces and other scenarios. Rated power is 500-4450 kW, covering the needs of medium and large industrial equipment. Voltage specifications: 3-phase 380V/50Hz. Suitable gas type: liquefied gas/natural gas. Pipe diameter size: DN65 Core functions one. Proportional adjustment function: By installing a ratio adjuster, stepless adjustment between small fire and large fire can be achieved, automatically adapting to different output needs, and maintaining the temperature or pressure stable. Two. Valve group configuration: Siemens valve group system is standard. three.Control mode: Supports single-segment fire operation mode. Application fields: boiler equipment (steam/hot water boiler), thermal oil furnace, industrial heating equipment, direct combustion lithium bromide air conditioning unit.
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China