Elektrogas Gas Safety solenoid valve VMR6-Rp2
Model: VMR6-Rp2 A safety shutting device using auxiliary power supply. Version: Fast opening and fast closing Supply voltage: 230 V AC Frequency: 50/60 Hz Power: 20 VA Current: max. 0.5 A Connection: Rp 2 “ Inlet pressure: 360 mbar C/O time: max. 1 sec Protection Class: IP 54 Ambient temp.: -15 °C … 60 °C Weight: 5.7 kg
FIDA 8Kv 20mA ignition transformer
Similar products : 8/20 CM, 8/30 CM, 8/10 CM, 5/18PM, 6/20 PM, 10/20 CM, 8/20 CM, 12/20 CM, 10/30 CM, 6/25 PM, 8/20PM, 8/30PM
Riello burner RS510/E BLU (20056930)
The RS 310-410-510-610/E-/EV-/EVi Blu burners series covers a firing range from 1200 to 6250 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers.
RIELLO GULLIVER RG4D (TYP.397T1)
All the models use the same components designed by Riello for the Gulliver series. The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. The two stage operation guarantees high level of thermal unit efficiency.
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction
The RS 310-410-510-610/M MZ burners series covers a firing range from 1300 to 6300 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction. FS1 and FS2 versions are available for intermittent and continuous operation applications. The exclusive design ensures reduced dimensions, simple use and maintenance. A wide range of accessories guarantees elevated working flexibility.
DUNGS MultiBloc MBE Valve VB-125 (274665)
The MBE multifunctional control combines the housing with two safety shutoff valves (ValveBody) and two electronic drives (ValveDrive) to actuate the safety valves and, optionally, to control the outlet pressure. The MBE is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The MBE is suitable for natural gas, vaporized propane or butane, air, 100% hydrogen, biogas up to max. 1% vol. H2S, and other inert gases.
Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator or by external 4-20 mA/0-10 V signal. The mechanical cam device of regulation allows to cah up a high modulation ratio on all firing rates range. The burners can, therefore, supply with precision the demanded power, guaranteeing a high efficiency system level and the stability setting, obtaining fuel consumption and operating costs reduction
DUNGS DMV-D 5080/11 eco (256360)
Max. Operating pressure: 500 mbar Nominal diameter: DN 65 - DN 125
Function : Filters can be installed in gas internal and compressed airpiping to protect subsequent valves. The filter element is composed of polypropylene non-woven fabric with a bore diameter of ≤ 50 μm. Dust, debris, rust and other solid companions and contaminants in the gas can be trapped by a non-woven cloth. When the dust collection capacity is exceeded or the pressure difference is too large, the filter loses its protection function. Install : Ot Note the direction of the air flow identified by the arrow on the filter housing. Consider the space required to replace the filter element. A vertically mounted filter cover facilitates the cleaning of the filter housing. Air tightness shall be checked after the installation. pay attention to! Not between hardened brick walls, concrete walls, floors, and filters Have direct contact. Replace the filter element : - Replace it at least once a year - When the differential pressure is 100% higher than the new filter element - When the pressure difference reaches a maximum of 50 mbar
DUNGS coil Mag.Nr.280 (213796)
Type:Mag.Nr.280 Art.Nr.213796 ~230 VAC 50-60Hz 60W IP54
DUNGS ignition transformer DEZ200 2x14kv (252114)
The DUNGS DEZ are electronic high-performance ignition transformers with high-frequency oscillation technology. Compared with conventional inductive ignition transformers, the DEZ are much smaller and lighter. Designs for one or two ignition electrodes are available in different voltage versions. SEO Model is the single electrode model. SEO versions are to be used when both ignition of the burner & flame monitoring via flame rod (ionization) are done with the same electrode. Application For oil and gas burners, ignition takes place, depending on design, with one ignition electrode against the burner mass or with two ignition electrodes between the electrodes. The DEZ ignition transformers are available in two versions: either (DEZ 1xx) with a high-voltage output for ignition against the burner mass or (DEZ 2xx) with two high-voltage outputs for ignition between the electrodes. For use in burner systems in which ignition and ionization flame monitoring takes place via a common electrode, the “SEO” versions must be used. Transformers for two electrodes are available upon request
DUNGS Pressure switch GAO-A4-4-3
Description The GAO-, GMH- and GML-A4… ventless pressure switches are adjustable pressure switches for automatic burner controls. These pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Test nipple integrated in metal housing to verify set point. Application : The GAO-, GMH-, and GML-A4… pressure switch is recommended for industrial and commercial heating, ventilation and air-conditioning systems. The GAO-, GMH-, and GML-A4… pressure switch is suitable for dry natural gas, propane, butane, air and other inert gases. Suitable for up to 0.1 % by volume, dry H2S.A “dry” gas has a dew point lower than +15 °F and its relative humidity is less than 60 %.
DUNGS Electromagnetic valve actuator VD-R-AC (274654)
The following models are available : • VD-V-(AC/DC) Open/close valve drive • VD-R-(AC/DC) Open/close valve drive with pressure regulation function • VD-(V/R)-(AC/DC)-POC Open/close valve drive with optional pressure regulation function and integrated closed position indicator switch
DUNGS solenoid valve coil Magnet-Nr.1511/2p
Dungs Solenoid Coil Magn Nr. 1511/2P (AC) 230V, 50/60Hz, ED(DU) 100%, IP54 2x95W/2x20W, max 2x0.54A
Shenzhen Zhongli Weiye Electromechanical Equipment Co., Ltd. is a professional thermal energy equipment combustion equipment company that integrates sales, installation, maintenance, and upkeep.Global sales and delivery.
Contact Us
Add: No. 482, Longyuan Road, Longgang District, Shenzhen, Guangdong Province China