Danfoss oil mouth 31.5 60° semi-solid

Danfoss oil mouth 31.5 60° semi-solid Oil mouth 31.5 60° semi-solid:This is the standard model of Danfoss OD series fuel atomizing nozzles, specially designed for medium and large industrial burners. Model meaning: "31.5" indicates the nozzle's flow rate, which is typically 31.5 USgal/h at a specific pressure; "60°" refers to the spray angle; "semi-solid" represents the spray pattern. Flow specification: 31.5 USgal/h Atomization angle: 60° semi-solid cone spray (between solid and hollow) Applicable oil: Light oil/Heavy oil (requires a 140μm Monel alloy filter) Functional features: Atomization control: The semi-solid flame mode balances combustion efficiency and stability, suitable for boiler systems. Typical applications: Industrial boiler burner matching. Commercial heating systems (requires matching with nozzles of other angles from 30° to 80°)

REGO pressure reducing valve LV4403B4

REGO pressure reducing valve LV4403B4 LV4403B4 is a medium and low pressure gas pressure reducing valve, mainly used for the pressure regulation of liquefied petroleum gas, and has the characteristics of accurate pressure control and fast response speed. The inlet is 1/2"F.NPT, the outlet is 1/2"F.NPT, the pressure adjustable range is 228-330mmW.C, and the flow is about 21kg/hr. Applicable media: LPG (liquefied petroleum gas), LNG (natural gas) and non-corrosive gas. Main functions: precise pressure regulation, quick response, wide application range, easy installation.

REGO pressure reducing valve LV4403B66

REGO pressure reducing valve LV4403B66 LV4403B66 is an industrial-grade gas pressure regulator produced by REGO, the United States. It is specially designed for liquefied petroleum gas (LPG) systems and is suitable for commercial, industrial and residential gas scenarios. Pressure range: Maximum inlet pressure 2kg/cm², outlet adjustable range 228-330mm water column (approximately 0.023-0.033kg/cm²) ‌Flow specification‌: approximately 15kg/h, adapted to 3/4" F.NPT pipeline interface. Applicable media: LPG, natural gas (LNG) and non-corrosive gases. Functional Features: ‌one.Structural Design‌ Cast zinc valve body + brass nozzle, built-in woven film and reciprocating die technology to improve durability and sealing. The external nozzle is designed for easy maintenance and is equipped with a UL standard filter to prevent impurities from being blocked. ‌two.Pressure regulation control‌ The balanced pivot structure ensures complete closing, feedback spring accelerated pressure response. Reserve downstream pressure detection holes to support real-time monitoring.

REGO pressure reducing valve LV5503B6

REGO pressure reducing valve LV5503B6 LV5503B6 is an industrial-grade gas pressure regulator produced by the REGO brand in the United States. It is specially designed for liquefied petroleum gas (LPG) and natural gas systems, and is suitable for commercial and industrial gas scenarios. Interface specifications: 3/4" F.NPT import and export threads‌. Pressure range: Maximum inlet pressure 2kg/cm², outlet adjustable range 2.4-3.3kPa (approximately 228-330mm water column) ‌Flow capacity‌: 35kg/h, adapted to medium and high pressure gas delivery needs‌. Applicable media: LPG, natural gas, nitrogen and other non-corrosive gases‌. Functional Features: ‌one. Precision pressure regulating structure‌ The woven film is combined with reciprocating pressing technology to improve durability and sealing. The built-in balance pivot design ensures full closing, and the external nozzle supports quick maintenance‌. ‌two. Intelligent Response System‌ The feedback spring accelerates the downstream pressure response, and reserves detection holes to monitor the pressure status in real time‌. Comply with US UL standards and equipped with a filter to prevent impurities from clogging‌.

RIELLO motor 603SE 90W (3008489)

RIELLO motor 603SE 90W (3008489) Product code: 3008489 Category: Burner accessories Motor 603SE :It is a compact motor designed for industrial equipment. Power: 90W, adapted to low-voltage DC or AC power supply systems. ‌Structure: adopts a brushless design, built-in permanent magnet rotor and stator armature winding, supporting three-phase power supply. ‌Control method‌: Supports FOC vector control, and can be adjusted through PWM or analog signals. Functional Features: ‌one.Efficient operation‌ Efficiency up to 55-68%, low noise design, suitable for precision equipment. Stepless speed regulation has a wide range (50-2500r/min), and smooth commutation. ‌two.Smart Control‌ Supports single-resistance/three-resistance current sampling, integrated weak magnetic control and torque compensation.

Steinen oil mouth 18.00 60°SS

Steinen oil mouth 18.00 60°SS Oil mouth 18.00 60°SS:It is a stainless steel fuel injector designed for industrial burners, mainly used for atomization injection of diesel fuel. "18.00" in the model represents flow rate or aperture specifications, and "60°SS" indicates that the spray cone angle is 60 degrees. It belongs to the Steinen burner accessories series, suitable for a variety of industrial combustion engine models‌. Functional Features: ‌Atomization Performance‌: Accelerate efficient atomization of fuel through precision design to ensure combustion adequacy and flame stability‌. ‌Durability‌: Stainless steel is resistant to high temperature corrosion and is suitable for long-term high-pressure environments. ‌Compatibility‌: Can match Steinen and other brands of burners, and support multiple models of replacement‌. Application scenario: Widely used in industrial combustion equipment such as boilers and kilns‌.

RIELLO ignition rod （3003851）

RIELLO ignition rod （3003851） Category: Burner accessories Product number:3003851 Mainly used in gas/fuel burners ignition systems‌. High-voltage electric sparks are generated by a built-in ignition transformer (secondary 8kV/30mA), which directly ignites gas or atomizes fuel, ensuring the burner starts quickly‌. Made of high-temperature resistant materials, it can adapt to the high-temperature working environment of the burner and has high stability for long-term use. Commonly used in burners such as the Liya Road 40 series, RL series, etc., it works in conjunction with program controllers (such as RMO503SE) to realize automated ignition process‌.

Weishaupt filter WF 510-1

Weishaupt filter WF 510-1 Category: Burner accessories WF 510-1:It is a high-efficiency fuel filtration equipment made by the German Weishaupt brand. Model: WF 510-1 Structural form: adopts a quick-release filter cartridge design, supporting single-core or multi-core parallel connection (common 3-core/5-core configuration). Functions: fuel purification, corrosion resistance design, and maintenance convenience.

Krom schroder solenoid valve VAS125R-NM (88000005)

Krom schroder solenoid valve VAS125R-NM (88000005) VAS125R-NM :It is an industrial-grade safety valve designed specifically for gas control systems. Valve type: Spring type normally closed gas safety valve, automatically closed when power is cut off. ‌Applicable media‌: natural gas, liquefied gas (LPG), urban gas and other gas media. ‌Inlet Pressure‌: Supports up to 500mbar working conditions. Core functions: ‌one.Safe cut‌ The valve core is controlled by solenoid coil, and the spring forces the valve to close the valve when power is lost to prevent gas leakage. ‌two.Flow adjustment‌ Equipped with manual adjustment screws on the actuator for precise control of the gas flow range. ‌three.Status monitoring‌ Integrated blue LED valve position indicator and magnetic switch, real-time feedback of valve opening and closing status. Typical Applications: Safety control of gas pipelines of industrial burners (such as ceramics and glass industries) Commercial heating system gas supply management.

krom schroder Solenoid valve VAS125R-NM (88014678)

krom schroder Solenoid valve VAS125R-NM (88014678) VAS125R-NM solenoid valve is a high safety control valve designed for gas systems. ‌Valve type‌: Spring type normally closed type, automatically cuts off the gas passage when power is cut off. Applicable media: natural gas, liquefied gas (LPG), urban gas and air. ‌Working pressure‌: up to 500mbar, applicable temperature range of -20℃ to 60℃‌. ‌Electrical parameters‌: 230V AC voltage, 50-60Hz frequency, power 30W, protection level IP65‌. Core functions: ‌one.Safe cut‌ When the solenoid coil loses power, the spring mechanism forces the valve to prevent gas leakage, and complies with EN161 safety standard‌. ‌two.Flow adjustment‌ Accurate gas flow control through manual adjustment screws on the actuator. ‌three.State visualization‌ Integrated blue LED valve position indicator and magnetic switch to display the valve opening and closing status in real time‌.

Krom schroder pressure switch DG50B-3 (84447200)

Krom schroder pressure switch DG50B-3 (84447200) Product code: 84447200 Category: Burner accessories DG50B-3 is a mechanical safety control device specially designed for gas systems. Output signal‌: single/dual contact switching, rated load of 250V AC‌. Media compatibility: suitable for gases such as natural gas, liquefied gas (LPG), air and biomethane. ‌Protection Level‌: IP54 (standard version) Functions: Pressure monitoring, safe cutting, on-site adjustment. Typical Applications: Industrial burner gas pressure safety interlock‌. Overpressure protection for air compressors and hydraulic systems‌.

Krom schroder pressure switch DL1,5A-3 (84444411)

Krom schroder pressure switch DL1,5A-3 (84444411) Product code:84444411 DL1,5A-3 is a mechanical safety control device dedicated to gas systems. Range range: 1.5-30mbar (custom-adjustable), suitable for low-pressure monitoring scenarios. ‌Contact Configuration‌: Single micro switch output, rated load of 250V AC. ‌Media compatibility: supports gas media such as natural gas, liquefied gas and biomethane. Functions: pressure protection, visual adjustment, safety certification.

Krom schroder pressure switch DG50U-5 (84447356)

Krom schroder pressure switch DG50U-5 (84447356) DG50U-5 is a mechanical safety control device designed specifically for gas systems. Range: 2.5-50mbar ‌Contact Configuration‌: Single microswitch output, rated load of 250V AC‌. Media compatibility: suitable for gases such as natural gas, liquefied gas (LPG), air and biomethane. ‌Protection Level‌: IP54 (standard version), operating temperature range -15℃ to 80℃‌. Core functions: Pressure monitoring and protection The stainless steel diaphragm is used to induce the pressure change, and the micro switch is triggered to cut off the pipeline when overpressure or underpressure, with the accuracy reaching ±1.5% of the full scale. ‌On-site adjustment‌ The dual-scale knob design allows intuitive adjustment of the action threshold and locking the set value‌.

Baltur BTG20 ignition needle

Baltur BTG20 ignition needle BTG20 ignition needle：It is the core ignition component of Italian BALTUR burners, designed for BTG20 series gas burners. Adaptive model: Specially used for BTG20 dual-section fire/proportional adjustment burner, compatible with natural gas, liquefied gas and other fuels. Function: Accurate ignition, safety protection, and adapt to the working environment.

Danfoss oil mouth 28.0 60° semi-solid

Danfoss oil mouth 28.0 60° semi-solid oil mouth 28.0 60° semi-solid:It is a Danfoss brand atomization nozzle assembly designed for combustion engine fuel systems. Spray hole specifications: 28.0 gallons/hour flow rate (approximately 106L/h), 60-degree spray cone angle, semi-solid atomization mode. ‌Adapted fuel‌: Light oil/heavy oil combustion engine, the working pressure range is usually 10-20 bar. Functional Features: o‌ne.Atomization control‌ Semi-solid oil mist is formed through precision-processed spray holes, taking into account combustion efficiency and flame stability. ‌two. Corrosion-resistant design‌ The main body of copper alloy material is long-term resistant to fuel sulfide corrosion.