6TRE

Italian cofi ignition transformer TRE820PISO

cofi ignition transformer TRE820P/4

Italy cofi ignition transformer TRS723P US

Italy cofi ignition transformer TRK2-40PVD

Italy cofi Ignition Transformer TRJ 20CVD

COFI Ignition transformer TRS1020

COFI Ignition transformer TRS1020 COFI ignition transformer TRS1020 is a bipolar high voltage ignition transformer from Italy. It is a medium-sized conventional transformer and is suitable for gas and fuel combustion engines with various continuous or intermittent power and higher current and voltage requirements. Product parameters Input voltage: 220V or 230V Input current: 1.1A Output voltage: 2×5kV Output current: 20mA Frequency: 50Hz Dimensions: 107x84x45mm Dull load rate: Some models are 25% (4min), that is, continuous work for 4 minutes, and can work intermittently for 16 minutes; some models are 33% (3min) Product Features Generate high-voltage ignition: The main function is to convert the low voltage of the power supply into high voltage, which is used to stimulate the spark plug to generate sparks, thereby igniting the mixed gas of fuel or gas and air, so that the combustion engine and other equipment can start combustion normally. It is suitable for a variety of equipment: suitable for oil-fired gas burners, wall-mounted boilers, hot water high-pressure cleaning machines, mosquito repellent equipment, etc., which can meet the ignition needs of different equipment. Stable ignition performance: With its specific voltage and current output parameters, the stability and reliability of ignition can be guaranteed to a certain extent, reducing ignition failure caused by voltage fluctuations and other factors, and providing guarantee for the stable operation of the equipment. Keywords:COFI Ignition transformer TRS1020

Cofi Ignition transformer TRE820P-4 1X8KV

Cofi Ignition transformer TRE820P-4 1X8KV COFI ignition transformer TRE820P-4 is a single pole high-pressure ignition transformer suitable for fuel and gas combustion engines and other equipment, with stable performance and rapid start-up. COFI ignition transformer TRE820P-4 is produced by Italian brand COFI, adopting advanced technology and stable product performance. It is compact and compact, easy to install and carry, and can be used to ignite the guiding ignition of industrial burners, suitable for occasions where interrupted ignition is required. Product parameters Primary voltage: 220V or 230V Frequency: 50Hz Secondary voltage: 8KV, peak value 11KV Ignition current: 20mA Protection level: IP54 Wiring method: three-wire system (brown connected to live wire, blue wire and neutral wire, two-color wire is grounded); four-wire system (black connected to live wire, blue wire is connected to neutral wire, brown wire is a high-voltage ground wire, single electrode is a feedback wire, two-color wire is grounded) Product Features Ignition function: High-pressure spark can be generated after power-on, which is used for automatic ignition operation of gas combustion equipment such as burners or burners, and can provide the equipment with sufficient energy to ignite the mixed gas of gas and air. High-frequency start: adopts high-frequency start technology, fast startup speed and short response time, can instantly ignite the equipment and improve work efficiency.

Cofi Ignition transformer TRK1-30CVD

Cofi Ignition transformer TRK1-30CVD COFI ignition transformer TRK1-30CVD is an electronic ignition transformer produced using electronic technology and has the characteristics of small size and light weight. The input voltage is 220-240V, the input current is 0.23A, the output voltage is 2×12kV, the output current is 30mA, and the frequency is 50/60Hz. This transformer is suitable for oil-fired gas burners, wall-mounted boilers, hot water high-pressure cleaning machines, mosquito repellent equipment, etc., and can meet the ignition needs of gas and fuel equipment with intermittent or continuous power requirements. Product features: High-efficiency ignition: It can convert the input low voltage into high voltage, generate high-voltage sparks, and provide sufficient energy for equipment such as combustion engines and industrial burners to ignite the gas and air mixture, achieving reliable ignition. Stable operation: Using vacuum impregnation process and specially designed epoxy resin, it ensures high insulation and can resist the impact of environmental factors on its performance to a certain extent, ensure stable operation under different working conditions, and reduce ignition failure caused by external interference. Adapt to multiple scenarios: TRK series is a standard transformer. Through different power settings, it can meet the market's demand for electronic equipment designed with different access and output ports. It is suitable for a variety of gas and fuel equipment and has a wide range of application scenarios.

Cofi Ignition transformer TRK2-30PVD

Cofi Ignition transformer TRK2-30PVD Cofi ignition transformer TRK2-30PVD is a single pole high-voltage ignition transformer suitable for fuel and gas combustion engines and other equipment. It is produced using electronic technology and has good electrical performance and environmental adaptability. The input voltage is 220-240V, the current is 0.3A, the output voltage is 1×15kV, the frequency is 50/60Hz, and the temporary loading rate is 33% (3min). The product is potted with high-quality resin adhesive, which can operate normally and safely under environmental conditions of -20℃-+60℃, and has the ability to resist electromagnetic interference, and complies with European industrial standard EN61588/2/3 and other relevant standards. Product functions: reliable ignition, adapt to a variety of equipment, stable operation Keywords:Cofi Ignition transformer TRK2-30PVD