RIELLO Ignition rod BS3-M (3008931)

RIELLO Ignition rod BS3-M (3008931) Model: BS3-M Product Type: Natural Gas Burner BS3-M is a core ignition component designed specifically for BS3/M series gas burners on the Riya Road. It is made of 2520 high-temperature resistant alloy material, instantaneous temperature resistance up to 1300℃, and integrates self-cleaning function to prevent carbon deposit from affecting performance‌. The component works in conjunction with the burner control unit (such as RMG/M88.62C2 or MG557/3 program controller), and can achieve reliable ignition through high-voltage electric spark, adapted to industrial boiler equipment in the power range of 16-250KW. Its design complies with EN298 safety standards, has a built-in ceramic semiconductor insulation layer, which can automatically adjust the discharge gap and reduce manual maintenance requirements. Functional features include: ‌Anti-interference design‌: Upgrade the circuit structure to adapt to gas/liquefied gas dual-fuel environment‌. ‌Quick Response‌: Matching with the interrupted operating mode of the RIELLOBS3/M burner, supporting high-frequency start and stop for 7*24 hours.

RIELLO Ignition needle (3013718)

RIELLO Ignition needle (3013718) Product number：3013718 Category: Burner accessories Ignition needle:It is a special ignition component of RIELLO burner. It is made of 2520 high-temperature resistant alloy material. It has an instantaneous temperature resistance of 1300℃, and has integrated self-cleaning function to prevent carbon deposit from affecting performance. This component is adapted to RIELLO multi-series burners (such as RS70/RS100/RS130, etc.), and can achieve reliable ignition through high-voltage electric spark. Its core functions include: ‌Quick Response‌: Works in conjunction with burner program controllers (such as RMO88.53C2) to support high-frequency start and stop‌. ‌Anti-interference design‌: Optimize the circuit structure and adapt to gas/fuel dual-fuel environment‌. ‌Long life characteristics‌: Ceramic semiconductor insulation layer can automatically adjust the discharge gap to reduce maintenance needs‌.

RIELLO motor MS3 90L1-2 B5（3013968）

RIELLO motor MS3 90L1-2 B5（3013968） MS3 90L1-2 B5 is a three-phase asynchronous motor and is often used in RIELLO burners and other equipment. It adopts a B5 flange installation structure and is adapted to the 90L1-2 base standard. It is specially designed for industrial combustion systems. Rated power is 1.5KW, 2 poles (simultaneous speed is 3000rpm), complies with IE3 energy efficiency level, and is suitable for constant torque load scenarios such as fans, pump sets, etc. Protection level IP55, insulation level F, built-in overheating protection device, adapts to ambient temperatures of -15℃ to +40℃. Directly connected to the RIELLOMS3 series burners through B5 flange, the shaft end is equipped with a keyway structure, and supports coupling or belt transmission. The electrical interface is compatible with 380V/50Hz three-phase power supply, and is equipped with a 6-core junction box (including PE terminals).

RIELLO capacitance CBB60（20087026）

RIELLO capacitance CBB60（20087026） Product code: 20087026 Category: Burner accessories CBB60 is a metallized polypropylene film capacitor designed for RIELLO burners, specifically for the start-up and operation of single-phase motors. Capacity range: 5μF - 100μF (common specifications include 20μF, 30μF, and 50μF), with a capacity tolerance of ±5% or ±10%. Voltage rating: 250VAC - 500VAC (450VAC is the typical value), suitable for 50/60Hz AC power supply. Self-healing: Automatically repairs overloads or local breakdowns, extending service life. Compact size: Cylindrical structure, suitable for narrow installation spaces. Functional applications: Motor support: Enhances the starting torque of single-phase motors, ensuring stable operation of equipment such as water pumps, cleaning machines, and industrial burners. Energy efficiency optimization: Reduces circuit harmonic losses and, in conjunction with RIELLO burner control systems, improves energy efficiency ratios.

RIELLO Flange gasket (3005813)

RIELLO Flange gasket (3005813) Flange gasket:It is a sealing element for RIELLO burners, adopts a multi-layer composite structure design and is adapted to the burner flange connection system. Core functions: one.High-pressure sealing: plastic deformation is generated through bolt preload, filling the microscopic unevenness of the flange sealing surface (Ra value 3.2-12.5μm), and preventing gas or air leakage. t‌wo.Dynamic Compensation‌: Built-in elastic material layer (such as graphite/metal composite), maintains the sealing specific pressure (σg≥mPi) under thermal cycling or vibration conditions, and compensates for flange displacement‌. t‌hree.Medium protection: Oil-resistant and high-temperature resistance are adapted to the burner fuel/gas environment, and the working temperature covers -40℃ to 450℃. Burner system: used for key sealing nodes such as combustion chamber flanges and gas valve group connections, with a pressure bearing range of 0-10MPa‌.

RIELLO light sense QRB4B-B050B70B（3012091）

RIELLO light sense QRB4B-B050B70B（3012091） Product code:3012091 Category: Burner accessories QRB4B-B050B70B is a photoelectric flame detector dedicated to RIELLO burners. It adopts ultraviolet/infrared composite sensing technology and is mainly used to detect flame state. Functional Application‌ ‌Safety Interlock: Cooperate with the RIELLO40FS series burner control panel to cut off fuel supply within 0.5 seconds after flame failure. ‌Self-diagnosis function‌: LED status indicators provide real-time feedback to sensor working status (normal/fault/pollution alarm). Structural Design Industrial-grade protection: The stainless steel shell reaches IP65 protection level, with a temperature resistance range of -30℃ to +80℃, suitable for high dust environment in the boiler room. Modular interface: installed through M18 threads, equipped with 3-core shielded cable (including grounding wire), and signal output is compatible with NO/NC mode.

RIELLO switch button (3012080)

RIELLO switch button (3012080) Product code: 3012080 Category: Burner accessories The switch button is a special control component for RIELLO burners. It combines the functional characteristics of industrial-grade push button switches and relays, and is usually used for circuit control of burners and other equipment. Functional Features ‌one. Dual control mode‌: Integrate instantaneous trigger (non-locking) and self-locking holding functions, and adjust the mode through the number of presses to the burner start/emergency stop scene. ‌two. Safety interlock: Built-in relay contact set (1 normally open + 1 normally closed), which can directly control solenoid valves or signal circuits with ≤5A, realizing electrical isolation and power amplification. ‌three.Status feedback‌: The top has LED indicator (red/green two colors), showing the circuit on and off or fault status in real time (such as overload protection trigger). Application scenarios‌ ‌burner control‌: As the main control switch of the RLS series burner of the Leya Road, it realizes three-state switching of ignition, operation and emergency stop‌. System extension: Multiple devices (such as fans and oil pumps) can be connected in series through contacts, supporting PLC signal input.

RIELLO control box 530SE (3001156)

RIELLO control box 530SE (3001156) Product code: 3001156 Category: Burner accessories 530SE is a program controller dedicated to RIELLO burners, integrating ignition control and safety monitoring functions. Structural Design one.Modular terminals‌: Use plug-in terminals, which support remote control signal input (such as PLC or thermostat)‌ ‌two. Industrial Protection‌: Metal shells resist electromagnetic interference, working temperature range -20℃ to +60℃‌ Core functions‌ ‌one. Integrated ignition control‌: built-in high-voltage ignition transformer (output 10kV/16mA), directly drives the ignition electrode without external transformers‌. ‌two.Multi-mode operation‌: Supports intermittent operation of single-stage/dual-stage burners, suitable for gas/fuel engine models (such as 40G series, BS series). ‌three. Safety interlock‌: Monitor flame signals in real time, and cut off fuel supply within 0.5 seconds when the flame is turned off. Application scenarios: Burner control: Specially used for fuel burners such as G10/G20/G20S and GS5 gas burners, etc.

RIELLO control box CMO88.53D2 (20210859)

RIELLO control box CMO88.53D2 (20210859) Product code: 20210859 Category: Burner accessories Brand: RIELLO Model: CMO88.53D2 Product Usage: Combustion Program Controller The CMO88.53D2 is RIELLO's new generation intelligent controller for burners, specifically designed for multi-stage oil/gas burners. Function Introduction Combustion Process Control: It can be used for single-stage or two-stage burners, controlling the entire burner to operate according to the set program, including ignition, fuel supply, combustion power regulation, etc., ensuring a stable and safe combustion process. Status Monitoring and Display: It uses multi-color LEDs to display the burner's operating status, such as normal operation and fault alarms. It has a lock reset function. When the burner is locked due to a fault, the operation can be attempted to be resumed through a reset operation. Moreover, it can perform self-diagnosis through the number of LED flashes and other methods, facilitating users to quickly locate the cause of the fault. Safety Protection: It features multiple safety protection functions. For instance, when abnormal flame is detected, it can automatically cut off the fuel supply to prevent dangerous situations. It may also monitor parameters such as the burner's temperature and pressure. When these parameters exceed the set range, it triggers a protection mechanism to stop the burner's operation. Parameter Setting and Adjustment: It supports users in setting the burner's relevant operating parameters, such as ignition time, pre-purge time, combustion power, etc. It may also have an automatic adjustment function, such as PID control, which automatically adjusts the parameters based on the actual operation to optimize the combustion effect. Communication Function: It may have a communication interface, supporting communication with external devices, such as connecting to a burner management system or a remote monitoring platform, to achieve functions like remote monitoring and data transmission, making it convenient for operators to remotely understand the burner's operating status and adjust parameters.

RIELLO lon line（3008453）

RIELLO lon line（3008453） Product code: 3008453 Category: Burner accessories lon line: It is an ion wire/flame detection cable suitable for Riello burners' BS/FS/GS series, branded by Riello. Function: Mainly used for flame detection, to determine whether the flame exists by detecting the ionic current in the flame. When the burner is operating, the ion lines sense ions generated by the flame, forming an ion current signal and transmitting it to the burner's control system. If the flame is extinguished and the ionic current disappears, the control system will respond in time based on this signal, such as stopping the fuel supply, etc., to ensure the safety and stability of the burner operation, prevent dangerous situations such as "false flames", and ensure that the combustion process is carried out normally and safely.

RIELLO nozzle (3003814)

RIELLO nozzle (3003814) Category: Burner accessories nozzle:It is a key atomization component in the Riello burner system, designed for fuel injection optimization. Application scenarios: ‌Industrial Burner‌: Used in conjunction with RIELLO FS series combustion engines to achieve efficient combustion. Function: The main function is to spray fuel (such as fuel oil) in a specific shape and flow rate, and mix it with air well to achieve efficient and stable combustion in the burner. Nozzles with different atomization angles and shapes can meet the needs of different burners and combustion conditions. For example, nozzles with 60° atomization angles can distribute fuel injections within a certain range. Combined with the burner's air supply system, fuel and air can be better mixed and burned in the combustion chamber, which will help improve combustion efficiency and reduce fuel waste and pollutant emissions.

RIELLO light oil burner R40 G5 LC

RIELLO light oil burner R40 G5 LC R40 G5 LC is a fire light oil burner, mainly used in the fields of home heating and other fields. Fuel type: light oil. Power range: Output is 28-60kW (2.3-5kg/h). Power supply requirements: single phase, 230V±10%, 50Hz. Current and speed: Motor running current is 0.7A, speed is 2850rpm (298rad/s). Capacitor: The start capacitor is 4uF. Ignition transformer: secondary is 8kV - 16mA. Oil pump pressure: Oil pump pressure 7-15bar. Power consumption: Total electrical power consumption 0.13kw, motor power consumption 0.09kw. Protection level: Electrical protection level is IP40. Functions: combustion function, safety protection function, stable operation function.

RIELLO light oil burner R40 G10 LC

RIELLO light oil burner R40 G10 LC R40 G10 LC is a one-section light oil burner, specially designed for small and medium-sized thermal energy equipment, mainly used in household heating and other fields, with high efficiency and safety features. Fuel type: light oil. Power range: Output is 54-120kW (4.5-10kg/h). Power supply requirements: single phase, 230V±10%, 50Hz. Motor parameters: operating current 0.7A, speed 2850rpm (298rad/s). Capacitor: The start capacitor is 4μF. Ignition transformer: secondary is 8kV - 16mA. Oil pump pressure: The oil pump pressure is 7-15bar. Power consumption: Total electrical power consumption is 0.17kW, motor power consumption is 0.09kW. Protection level: Electrical protection level is IP40. Function:Stable combustion function, safety protection function, low noise operation, and convenient installation.

RIELLO oil and gas dual-purpose burner RLS 250-M MZ

RIELLO oil and gas dual-purpose burner RLS 250-M MZ RLS 250-M MZ is a light oil/gas dual fuel burner suitable for hot water boilers, steam boilers, thermal oil furnaces and other equipment. Fuel compatibility: supports dual mode switching of light oil/gas (G20/G25), and the fuel injection volume is adjustable by 1-30kg/h. Adjustment method: gas side proportional adjustment (0-100% continuously variable speed), and two-stage fire control on the fuel side. Fuel type: light oil, natural gas can also be used (G20, G21, G22, G23, G25, etc.). Power supply requirements: 230V/400V (with neutral wire), three-phase, 50Hz. Oil pump related: The oil pump output can reach up to 230kg/h when the pressure is 12bar, the pressure range is 10-21bar, and the fuel temperature is up to 90°C. Functions: combustion function, safety protection function, fault diagnosis function, noise control function.

RIELLO gas burner RS 410-M MZ

RIELLO gas burner RS 410-M MZ RIELLO RS 410-M MZ is a forced ventilated gas burner under the Italian Riello brand. It adopts mechanical proportional adjustment technology and is specially designed for industrial heating equipment. It belongs to the RS series and has low nitrogen emission characteristics. It is suitable for a variety of industrial and commercial scenarios. Output range: Covering medium and low power requirements. Applicable fuel: natural gas and other gas types‌. Functional Features ‌combustion control‌: Accurately adjust the air/gas ratio through servo motors (such as SQM40/SQN series) to ensure stable combustion‌. ‌Compatibility: Adaptable to steam boilers, hot water boilers and industrial heating equipment.