SIEMENS servo motor SQM56.687A1

SIEMENS servo motor SQM56.687A1 SQM56.687A1‌ is a high-performance AC servo motor, belonging to the SQM5 series electric actuators, mainly used for gas/air valve control and damper adjustment in industrial combustion systems. The motor adopts ‌Permanent Magnet Synchronous Motor (PMSM)‌ technology, and has the characteristics of ‌high dynamic response, low moment of inertia, high torque density‌. Supply voltage: AC 110V±10% (50/60Hz), power consumption is about 20VA, built-in overcurrent protection (trip current 3A). Protection level: IP54 (dust-proof and splash-proof). Power output: Directly drive mechanical loads (such as valve shaft). Control target: Adjust the angle position or opening of the valve/storm. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQM48.497B9

SIEMENS servo motor SQM48.497B9 SQM48.497B9 belongs to the SQM48 series electric actuators, mainly used for gas/air valve control and damper adjustment in industrial combustion systems. Running time: 30 seconds / 90° (AC 2x12V powered), supports speed adjustment through the burner controller (such as 60 seconds / 90° mode). Torque output: 20N・m (continuous load), peak torque can reach 20N・m, suitable for medium and high resistance valve drives. Supply voltage: AC 2x12V±10% (50/60Hz), power consumption is about 26-34VA, built-in overcurrent protection (trip current 3A). Protection level: IP54 (dust-proof and splash-proof), optional IP65 upgraded version, suitable for humid or dusty environments. Mechanical interlock: Manual/automatic switching clutch allows manual operation of the valve with special tools during power outage to avoid control failure in emergencies. Overload protection: Built-in torque limiter, which automatically disengages when the load exceeds the set value (such as valve jams), prevents the motor from burning. Control target: Adjust the angle position or opening of the valve/storm. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQN71.664A20

SIEMENS servo motor SQN71.664A20 SQN71.664A20 belongs to the SQN7 series electric actuators, mainly used for the control of damper baffles and fuel regulating valves for small and medium-sized fuel or gas burners. Torque output: 2.5N・m (continuous load), peak torque can reach 2.5N・m, suitable for medium and low resistance valve drives. Rotation angle: 0-90° (can be expanded to 130°), mechanical backward difference <1%, repeat positioning accuracy ±0.5°. Running time: 30 seconds / 90° (powered at 50Hz), supports speed adjustment through the burner controller (such as 60 seconds / 90° mode). Supply voltage: AC 230V±15% (50/60Hz), power consumption is about 6VA, built-in overcurrent protection (trip current 3A). Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: adjust the angle position or opening of the valve/storm. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQN90-240B2793

SIEMENS servo motor SQN90-240B2793 SQN90.240B2793 belongs to Siemens SQN90 series electric actuators, mainly used for damper baffle control and air-fuel ratio adjustment of small and medium-sized fuel/gas burners. Torque output: 2.4N・m (continuous load), suitable for driving medium and low resistance dampers or gas valves. Rotation angle: 0-90° (mechanical limit adjustable), repeat positioning accuracy ±1%, mechanical backward difference <0.5°. Running time: 12 seconds / 90° (AC 220-240V powered), speed adjustment can be made through the burner controller (such as 24 seconds / 90° mode). Shaft specification: 14mm diameter with keyway output shaft, compatible with the damper installation interface of mainstream burners such as RIELLO and Weishaupt. Supply voltage: AC 220-240V±10% (50/60Hz), power consumption 8VA, built-in overcurrent protection (trip current 1.5A). Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision adjustment of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: damper angle position or burner load adjustment. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: combustion system and damper control of industrial furnaces.

SIEMENS servo motor SQN90-570A2793（3012885）

SIEMENS servo motor SQN90-570A2793（3012885） SQN90-570A2793 (3012885) belongs to the SQN90 series electric actuators, mainly used for damper baffle control and air-fuel ratio adjustment of small and medium-sized fuel/gas burners. Torque output: 2.4N・m (continuous load), suitable for driving medium and low resistance dampers or gas valves. Rotation angle: 0-90° (mechanical limit adjustable), repeat positioning accuracy ±1%, mechanical backward difference <0.5°. Running time: 24 seconds / 90° (AC 220-240V powered), speed adjustment can be made through the burner controller (such as 48 seconds / 90° mode). Shaft specification: 14mm diameter with keyway output shaft, compatible with the damper installation interface of mainstream burners such as RIELLO and Weishaupt. Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision adjustment of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: damper angle position or burner load adjustment. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: combustion system and damper control of industrial furnaces.

RIELLO motherboard（0CR107934)

RIELLO motherboard（0CR107934) Motherboard （0CR107934) is the core component in its burner or boiler control system, mainly used to manage combustion processes, safety protection and parameter adjustment. Power interface: Provides 24V or 230V power supply, and some models support redundant power inputs for improved reliability. Sensor interface: Connect to pressure sensor, temperature probe and flame detector to collect real-time data. Actuator control: drive the servo motor to adjust the damper opening, oil pump frequency and solenoid valve opening and closing. Communication interface: supports industrial protocols such as Modbus, CAN buses, etc., which facilitates system integration. Core functions Combustion control: Through integrated microprocessors and sensors, the motherboard monitors the burner's fuel supply (such as light oil, gas), air flow and flame status in real time to ensure maximum combustion efficiency and comply with environmental standards. For example, in the RIELLO Gulliver RG series burners, the control motherboard needs to coordinate the oil pump, damper and ignition system to achieve stable combustion. Safety protection: Built-in multiple safety mechanisms, including flame detection (such as photovoltaics or ionization probes), overvoltage/undervoltage protection, temperature monitoring, etc. If an abnormality is detected (such as flame extinguishing or gas leakage), the motherboard will immediately cut off the fuel supply and trigger an alarm to prevent accidents. Parameter adjustment and communication: It supports communication with the host computer or boiler management system through external interfaces (such as RS485, Modbus), allowing users to remotely configure combustion parameters (such as output and damper opening), and feedback operating data in real time. Compatibility and Extensibility: Adapt to multiple RIELLO product lines, including commercial boilers (such as Family Series), industrial burners (such as RS/E ULX Series), and condensing boilers (such as Condex A Pro). Some models support multi-fuel switching (such as dual-use oil and gas), and can be adapted to different fuel types through software configuration.

RIELLO motherboard（20078150）

RIELLO motherboard（20078150） The motherboard (20078150) is an electronic motherboard used in the Riello burner control system, which is mainly used in industrial burners, boilers, heating systems and other equipment. The motherboard is responsible for ignition control, flame monitoring, safety protection and other functions to ensure the stable and safe operation of the combustion system. Power interface: Provides 24V or 230V power supply, and some models support redundant power inputs for improved reliability. Sensor interface: Connect to pressure sensor, temperature probe and flame detector to collect real-time data. Actuator control: drive the servo motor to adjust the damper opening, oil pump frequency and solenoid valve opening and closing. Main functions: Combustion control Control ‌ignition procedure‌ (pre-purging, ignition, main combustion stage). Adjust the opening of the gas/fuel valve to optimize combustion efficiency. Flame monitoring Use ‌ionizing electrodes or UV flame sensors to detect the flame state. If the flame is abnormal (ignition failure, ignition failure), the fuel supply will be automatically cut off and alarm will be called to prevent accidents. Security protection‌ ‌Overheating protection‌ (temperature sensor monitoring). ‌Gas pressure monitoring‌ (optional pressure switch interface). ‌Fault self-diagnosis‌ (LED indicator or error code display). compatibility Adapted to ‌Liya Road burners‌ (such as RLS, GAS, BLU series, etc.).

RIELLO motherboard（20078413）

RIELLO motherboard（20078413） The motherboard (20078413) is the core electronic control module of the Riello burner control system, designed for industrial-grade gas/fuel burners. The motherboard is responsible for the automation control of the combustion process, safety monitoring and fault diagnosis. Power interface: Provides 24V or 230V power supply, and some models support redundant power inputs for improved reliability. Sensor interface: Connect to pressure sensor, temperature probe and flame detector to collect real-time data. Actuator control: drive the servo motor to adjust the damper opening, oil pump frequency and solenoid valve opening and closing. Communication interface: supports industrial protocols such as Modbus, CAN buses, etc., which facilitates system integration. Core functions and application scenarios Combustion control: Through integrated microprocessors and sensors, the motherboard monitors the fuel supply (such as light oil, gas), air flow and flame status of the burner in real time to ensure maximum combustion efficiency and comply with environmental standards. For example, in the RIELLO RS/E ULX series burners, the control motherboard needs to coordinate the servo motor to adjust the damper opening and gas butterfly valve to achieve ultra-low nitrogen oxide (NOx) emissions (such as ≤30 mg/kWh). Safety protection: Built-in multiple safety mechanisms, including flame detection (such as ion probes), overvoltage/undervoltage protection, temperature monitoring, etc. If an abnormality is detected (such as flame extinguishing or gas leakage), the motherboard will immediately cut off the fuel supply and trigger an alarm to prevent accidents. For example, the safety program controller of the RIELLO burner can be displayed with an LED indicator, which requires a professional to reset. Parameter adjustment and communication: It supports communication with the host computer or boiler management system through external interfaces (such as RS485, Modbus), allowing users to remotely configure combustion parameters (such as output and damper opening), and feedback operating data in real time. Compatibility and Extensibility: Adapt to multiple RIELLO product lines, including commercial boilers (such as Family Series), industrial burners (such as RS/E ULX Series) and condensing boilers (such as Condex A Pro). Some models support multi-fuel switching (such as oil and gas dual-use), and can be adapted to different fuel types through software configuration.

SIEMENS servo motor SQM33.511A9

SIEMENS servo motor SQM33.511A9 The SQM33.511A9 is a core component designed for burner control systems, mainly used to precisely adjust damper opening or fuel valves for efficient combustion and low emissions, adapted to LMV27 and LMV37 series combustion managers, commonly used for air-fuel ratio control of gas/fuel burners. Its design goal is to achieve high-precision adjustment through mechatronics while meeting reliability requirements in industrial environments. Protection level is: IP54. Drive mode: Use a synchronous motor with self-locking, with a running torque of 3Nm and a holding torque of 2.6Nm, supports clockwise/counterclockwise bidirectional rotation, and the maximum rotation angle is 160°. Electrical parameters: Operating voltage is 24V±20%, power consumption is 10W, can be controlled by analog signal (2-10V or 4-20mA), and feedback signal output is provided. Operating temperature range is -25°C to +60°C, anti-vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2), suitable for harsh environments such as boilers, hot air furnaces, smelting furnaces, etc. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners.

SIEMENS servo motor SQM33.711A9

SIEMENS servo motor SQM33.711A9 SQM33.711A9 is a high-precision actuator specially designed for industrial burners. The core function is to achieve efficient combustion and low emission control by dynamically adjusting the damper opening or fuel valve. It belongs to the Siemens SQM33 series digital servo motor, adapted to LMV27 and LMV37 series combustion managers, and is commonly used for air-fuel ratio control of gas/fuel burners. Its design goal is to achieve high-precision adjustment through mechatronics while meeting reliability requirements in industrial environments. Torque and stroke: Running torque 10 Nm (holding torque 6 Nm), 90° rotation stroke time 17 seconds, support clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), stable operation from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Electrical parameters: working voltage 24V±20%, power consumption 10W, supports analog control (2-10V or 4-20mA), and provides feedback signal output. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. Operating temperature range: -25°C to +60°C, anti-vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2), suitable for harsh environments such as boilers, hot air furnaces, smelting furnaces, etc.

SIEMENS servo motor SQM45.291B9

SIEMENS servo motor SQM45.291B9 SQM45.291B9 is a high-precision actuator specially designed for medium and large burners. It realizes precise control of dampers or fuel valves through CAN bus communication and is widely used in industrial and commercial combustion systems. SQM45.291B9 belongs to Siemens SQM45 series digital servo motors, designed for LMV5 series combustion managers. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting reliability requirements in industrial environments. Torque and stroke: Rated output torque 3 Nm, holding torque 1.5 Nm, 90° Rotation stroke time 10-120 seconds (can be adjusted via the LMV5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Mechanical design: Aluminum die-cast gear shaft housing is paired with a lifetime lubricated plastic cylindrical gear transmission, equipped with a D-type connecting shaft (10mm diameter) and a 6-pin RAST3.5 connector to ensure long-term reliable operation. Electrical parameters: Powered by CAN bus cable (AC 2×12V), driven by stepper motor, power consumption 9-15 VA, and position feedback (Hall sensor) supports 0.1° resolution. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-fuel adaptation: The gas and fuel mode can be switched through software configuration and is compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

SIEMENS servo motor SQM45.295B9

SIEMENS servo motor SQM45.295B9 SQM45.295B9 is a high-precision actuator designed for medium and large burners. It realizes dynamic control of dampers or fuel valves through CAN bus communication, and is especially suitable for flue gas recirculation (FGR) systems and low-nitrogen combustion technology. SQM45.295B9 belongs to the Siemens SQM45 series digital servo motor, designed for the LMV5 combustion manager. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting the reliability requirements in industrial environments. Torque and stroke: Rated output torque 3 Nm, holding torque 1.5 Nm, 90° Rotation stroke time 10 seconds (can be adjusted to 120 seconds through the LMV5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Electrical parameters: Powered by CAN bus cable (AC 2×12V), driven by stepper motor, power consumption 9-15 VA, and position feedback (Hall sensor) supports 0.1° resolution. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multiple limit protection: Built-in 2 mechanical limits and 6 auxiliary switches to prevent dampers or valves from exceeding the safe travel range. When mechanical jamming is detected, the motor will automatically stop and an alarm will be triggered through LMV5. Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

Danfoss ignition transformer EBI (052F0030)

Danfoss ignition transformer EBI (052F0030) Category: Burner accessories EBI (052F0030)‌ is a ‌high-pressure ignition transformer‌ designed for gas burners, belonging to the Danfoss combustion control product line. This transformer is used to generate high-pressure sparks and reliably ignite gas/air mixtures. It is suitable for gas combustion systems such as industrial boilers, commercial burners, heat treatment equipment, etc. Input voltage: 230V AC (50/60Hz), power 60VA. Output voltage: 15kV, short circuit current 40mA RMS. Protection design: enclosure protection rating IP40, can operate stably from -25°C to +60°C, resisting vibration and electromagnetic interference. Core functions: efficient ignition control, safety and protection mechanism, compatibility and scalability. High voltage pulse generation: Convert the 230V input voltage to a 15kV pulse through a high-frequency oscillation circuit for a duration of 0.1-0.3 seconds to ensure rapid ignition of gas or fuel. Multi-fuel adaptation: supports gas (natural gas, LPG) and light oil (such as 28-second fuel), optimize the ignition effect of different fuels through electrode gap adjustment (2-3mm recommended).

SIEMENS servo motor SQM50.424A2Z7R

SIEMENS servo motor SQM50.424A2Z7R Model: SQM50.424A2Z7R The SQM50.424A2Z7R is a high-precision actuator designed for medium and large burners. It realizes dynamic control of dampers or fuel valves through CAN bus communication, especially suitable for low-nitrogen combustion technology and multi-fuel switching systems. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting reliability requirements in industrial environments. Rated output torque: 15 Nm, hold torque: 7.5 Nm, 90° Rotation travel time: 34 seconds (can be adjusted to 120 seconds through the AGA58.5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle: 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resisting vibration and electromagnetic interference. Supply voltage: 220-240V~(50-60HZ), power consumption is: 20VA. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Precise air-fuel ratio adjustment: Works in conjunction with the AGA58.5 combustion manager, receives instructions through the CAN bus, dynamically adjusts the damper opening or gas valve position to ensure the optimal mixing ratio of air and fuel. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

SIEMENS high sensitivity bulb P578.61

SIEMENS high sensitivity bulb P578.61 Model: P578.61 Brand: sylvania Uses: Mainly used in flame detectors and ultraviolet photosensitive tubes. Siemens' core product in the field of industrial detection is the QRA series of flame detectors (such as QRA10M.C, QRA2M), which has built-in high-sensitivity UV photosensitive tubes that can detect ultraviolet signals of gas and fuel flames. Sensitivity: 0.01-10mW/cm² (adjustable) Response time: ≤0.1 seconds Protection Class: IP54, can operate stably from -25°C to +60°C. The core components of Siemens' high sensitivity detection technology: one.QRA series flame detectors How it works: Capture ultraviolet rays in the flame (wavelength 190-280nm) through UV photosensitive tubes, and realize high sensitivity detection (detection threshold ≤0.1mW/cm²) Two. Light source module in machine vision system Application scenarios: Siemens SIMATIC Machine Vision system (such as VS 110) uses infrared LED light sources to achieve high contrast imaging through high frequency flicker (20-300μs). It is suitable for electronic component detection, PCB defect recognition and other scenarios, with an accuracy of up to ±0.01mm.