Baltur BTG20 ignition needle

Baltur BTG20 ignition needle BTG20 ignition needle：It is the core ignition component of Italian BALTUR burners, designed for BTG20 series gas burners. Adaptive model: Specially used for BTG20 dual-section fire/proportional adjustment burner, compatible with natural gas, liquefied gas and other fuels. Function: Accurate ignition, safety protection, and adapt to the working environment.

Baltur solenoid valve RAMPA MV15BA0C-R3-4

Baltur solenoid valve RAMPA MV15BA0C-R3-4 The RAMPA MV15BA0C-R3-4 solenoid valve is a control component specially designed for gas combustion systems. Valve body type: Direct-acting two-position two-way valve, using a combination of brass valve body and fluoroelastic seal. ‌Voltage specification‌: Standard 24V DC coil voltage, protection level IP65. Core functions: ‌one. Quick response‌ When powered on, the solenoid force directly drives the valve core, and the operating time is less than 1 second, which is suitable for high-frequency switching scenarios. ‌two.Safe cut‌ The gas passage is urgently cut off through the spring force at the moment of power failure, which complies with the EN161 safety standards. Adaptation system: Matched with Baltur RAMPA series combustion controllers and supports natural gas/LPG dual fuel system. The maximum working pressure is 36mbar, and the medium temperature range is -15℃~80℃.

Baltur motor XS 5-3007

Baltur motor XS 5-3007 XS 5-3007 is a single-phase capacitor-starting asynchronous motor designed for burners. It is produced by Italian company SIMEL. It is mainly used to drive the fan impeller of the burner and provide stable combustion air. Rated power: 0.37 kW (at 50Hz). Voltage/Frequency: 230V AC, 50Hz, current 2.5A. Capacitor specification: 14 μF, for start-up assistance. Speed: 2800 rpm (two-pole motor, synchronous speed 3000 rpm, slip rate is about 6.7%) Protection level: IP44. Dust-proof and splash-proof, suitable for humid or dusty industrial environments. Single-phase capacitor starts asynchronous motor: starts with phase separation of capacitors, and the capacitor exits during operation. The structure is simple and reliable, suitable for intermittent loads such as burners. Direct drive: The motor shaft is directly connected to the fan impeller, no additional transmission is required, reducing energy loss. Core functions: stable air supply, reliability and durability, and low maintenance requirements. Application scenarios: One. Gas Burner It is suitable for burners such as Baltur brand TBG35, TBG35P, TBG35PN, etc., and is used for the supply of combustion air for boilers, furnaces, and industrial heating equipment. Two. Light oil burner Some models (such as the TBL series) may require a dual motor configuration, with the XS 5-3007 driving the fan and the other motor driving the oil pump for oil and gas mixed combustion. Three.Other industrial equipment It can be used as a power source for small fans and pumps, and is suitable for scenarios with high volume and reliability requirements.