Steinen oil mouth 26.00 60°SS

Steinen oil mouth 26.00 60°SS Oil mouth 26.00 60°SS is a precision nozzle assembly with a 60-degree solid cone (SS) spray design for industrial combustion systems. Its core parameters indicate that this model has a specific flow specification (26.00) and atomization angle. Model: 26.0 60° SS Angle: 60° Main technical features: one. Atomization performance The 60° solid cone spray structure can form a uniform fuel distribution, suitable for the complete combustion of light and heavy oil fuels. It has a similar atomization principle to similar nozzles from brands like Danfoss (such as 9.0 60°S). two. Material and durability Made of stainless steel, it has high-temperature corrosion resistance suitable for long-term operation in combustion equipment. The structural strength meets industrial standards and can be used with controllers from brands like Kromschroder. Typical application scenarios: Fuel injection systems in industrial boiler burners, commonly found in applications requiring precise fuel atomization control in automobiles and industrial equipment. Functions: Precise combustion control, wide operating condition adaptability.

SUNTEC oil pump AN67A 7345-4

SUNTEC oil pump AN67A 7345-4 Category: Burner accessories AN67A 7345-4:It is a combustion engine oil pump under the SUNTEC brand, mainly used in fuel burners of brands such as Riello. Core parameters Model: AN67A7345-4 Brand: SUNTEC ‌Fuel type‌: Diesel. Applicable areas: Fuel supply system for combustion engines, boilers and other equipment. Functional Features Pressure range: 7-14 bar (base gear) or 10-20 bar (high voltage gear). ‌Applicable scenarios‌: Designed specifically for burners, it can stabilize oil supply and ensure combustion efficiency. ‌Compatibility‌: Adapt to fuel burners such as Riello and Baltur.

SUNTEC oil pump AN77A 7255-2

SUNTEC oil pump AN77A 7255-2 This model belongs to the SUNTEC industrial oil pump series and is specially designed for combustion engine fuel systems. It adopts a gear pump design and is suitable for combustion engine models such as Riello RS34/RS70. Fuel adaptability: supports a variety of fuels such as kerosene, light oil, heavy oil, etc., suitable for burner supporting scenarios, and can form a control system with DUNGS solenoid valve and Krom pressure controller. Pressure regulation: Built-in pressure regulator can realize automatic pressure control to ensure stable fuel supply. ‌Sealing function‌: It has a safe cutting mechanism and meets the reliability requirements of industrial equipment. Application scenario: It is mainly used for fuel delivery systems for thermal energy equipment such as oil-burning machines and boilers, and must be used with burners.

SUNTEC oil pump AL95C 9412-4（20033550）

SUNTEC oil pump AL95C 9412-4（20033550） The AL95C 9412-4 is a high-pressure gear pump from the AL series produced by the French company SUNTEC, specifically designed for the fuel system of combustion engines. Structural design: It features an internal precision gear set, providing stable fuel pressure output and is suitable for light oil fuels (diesel/kerosene). Pressure regulation: The outlet pressure is adjustable, supporting both single-pipe (only fuel supply) and double-pipe (fuel supply + return) operation modes. Regulation capability: It supports two-stage flame regulation. Safety control: An integrated solenoid valve enables rapid fuel cut-off, and a built-in 150μm filter ring prevents impurities from clogging. Working pressure: It can reach a maximum speed of 3600 rpm, and is suitable for fuel viscosities of 2-12 mm²/s. Compatibility: It is suitable for industrial burners with power ranges of 10 to 30,000 kW, commonly found in boilers, hot air furnaces, and other thermal equipment. It can be used with burners from brands such as RIELLO and NU-WAY. Application scenarios: It is compatible with burners from brands like RIELLO, with a flow rate range of 500-1350 L/H and supports operating temperatures from 0 to 60°C.

Weishaupt controller W-FM 20 V3.11

Weishaupt controller W-FM 20 V3.11 W-FM 20 V3.11 is a core control device for gas burners produced by Weishaupt, which is mainly used to regulate the combustion process and monitor the operating status. Core functions ‌Microprocessor control‌: Automatic control of all functions of the burner through a built-in microprocessor. ‌ ‌Safety Monitoring‌: Monitor combustion status in real time to ensure safe operation. ‌Data Bus Interface (eBUS): Supports data communication with other devices. ‌Solbaric valve leak detection device‌: built-in function to detect leakage in gas pipelines. Applicable model Suitable for the following Viso burners: ‌Gas type‌: WG10 (proportional adjustment), WG20 (proportional adjustment), WG30, WG40. ‌Fuel type‌: WL30 (dual-segment fire), WL40 (dual-segment fire)‌.

Krom schroder pressure switch DL50A-31 (84444490)

Krom schroder pressure switch DL50A-31 (84444490) Product code: 84444490 Category: Burner accessories Pressure switch DL50A-31 is a precision pressure control device specially designed for industrial combustion systems. It is mainly used for pressure monitoring and control of gas equipment to ensure the safety and stability of the combustion process. Voltage: 250VAC. Temperature range: -20/+80°C. Protection level: IP54 Core functions Pressure monitoring: Detect in real time whether the gas pressure is in the safe range, and triggers signal conversion when the pressure exceeds or is lower than the preset value. ‌Double Protection Mechanism‌: Some models support dual pressure point settings, which can monitor the high and low pressure status at the same time to avoid insufficient or excessive gas supply. ‌Instrument convenience‌: adopts a modular design, which can quickly access the combustion system and reduce maintenance costs. Applicable scenarios: Applicable to boilers, burners and other equipment to ensure the stability and safety of gas supply.

Krom schroder pressure switch DG6U-3 (84447250)

Krom schroder pressure switch DG6U-3 (84447250) Category: Burner accessories Pressure switch DG6U-3 is a precision pressure control device designed for industrial combustion systems. It is mainly used to monitor and regulate the pressure of gas, air or flue gas to ensure the safety and stability of the combustion process. Voltage: 250VAC. Temperature range: -20/+80 ℃ Protection level: IP54. The pressure adjustment range is: 0.4-6mbar‌, which is suitable for pressure monitoring and control of gas, air and other media. Core functions Pressure adjustment: The set pressure action point can be adjusted through the dial to achieve accurate control. ‌Safe Cutoff‌: Automatically cut off gas or air supply when the pressure is abnormal (such as too high/too low) to ensure the safety of the system. Applicable scenarios: gas pipeline pressure regulation, air compression system safety protection, flue gas emission pressure monitoring.

Krom schroder pressure Switch DG10U-3 (84447300)

Krom schroder pressure Switch DG10U-3 (84447300) Category: Burner accessories Pressure switch DG10U-3 is a mechanical pressure switch designed for gas pressure monitoring. Voltage: 250VAC. Temperature range: -20/+80 ℃ Protection level: IP54. Core functions Pressure monitoring and control: Monitor gas pressure in real time, automatically trigger an alarm or cut off the gas/air supply when the pressure exceeds or is lower than the set threshold, ensuring safe operation of the system. ‌Safety protection mechanism‌: Supports negative voltage and low voltage cutoff functions to avoid damage to the equipment due to abnormal pressure. ‌field pressure adjustment‌: Set point pressure can be adjusted through a knob or screwdriver, which is convenient to operate and supports dual scale display. ‌Adaptive Scenario‌: Designed specifically for burner systems, it is suitable for overpressure/undervoltage protection of pneumatic systems such as gas equipment, air compressors, and refrigeration equipment, as well as pressure safety control for automated control.

Krom schroder pressure Switch DG50U-3 (84447350)

Krom schroder pressure Switch DG50U-3 (84447350) Category: Burner accessories Pressure switch DG50U-3 is a mechanical pressure switch suitable for gas, air and flue gas media. It supports positive and negative pressure measurement and has pressure adjustment scale display function. Voltage: 250VAC. Temperature range: -20/+80 ℃ Protection level: IP54. Pressure range: 2.5-50mbar (lower/higher adjustable) ‌. ‌Safety Protection‌: Automatically cut off gas/air supply when pressure is abnormal, with low voltage protection function ‌. Pressure monitoring: mechanical design, adjustment range of 2.5-50mbar, pressure threshold is calibrated by knob and displayed with scale, supporting positive/negative pressure control. ‌Control mode: Supports positive pressure, negative pressure and differential pressure control, but cannot be used in gas medium in differential pressure mode (avoiding the risk of gas leakage). Adaptive scenario: It is specially designed for burner systems and can form a safety control chain with solenoid valves. It is suitable for boilers, ventilation systems and industrial automation pressure monitoring.

Krom schroder pressure switch DG150U-3 (84447500)

Krom schroder pressure switch DG150U-3 (84447500) Product number：84447500 Category: Burner accessories Pressure switch DG150U-3:It is a high-precision mechanical pressure control device, specially used for pressure monitoring and safety protection of gas, air and flue gas media. Pressure range: 30-150mbar ‌Output signal‌: Mechanical microswitch contacts, load capacity adapted to low-voltage control circuit. ‌Accuracy Level‌: High repeatability for full scale, with dual scale adjustment knobs to support on-site pressure setting. ‌Medium compatibility: Applicable to gas, compressed air, flue gas and biomethane gas (not used for gas during differential pressure control). Structural design: It adopts stainless steel diaphragm sensor, which is impact-resistant and corrosion-resistant, compact aluminum alloy shell, protection level IP54, adapts to harsh industrial environments. Functional characteristics: The mechanical switch structure has a lifespan of more than one million times, high stability, with anti-error operation locking device, ensuring safety of set value, supporting positive/negative pressure control, and can be connected in series to achieve low-voltage cutting function. Typical Applications ‌Gas system‌: Pressure protection and low-pressure cutting of gas boilers and burners. Industrial automation: overvoltage/undervoltage monitoring of air compressors and pneumatic control systems.

Schneider shampoo actuator MD603 A200

Schneider shampoo actuator MD603 A200 The MD603 A200 is a high-precision electric actuator specifically designed for industrial combustion systems, mainly used to control the opening of air dampers to regulate combustion efficiency and safety. It belongs to Schneider's MD series of damper actuators and is suitable for HVAC systems, industrial burners, and ventilation equipment. Its design focuses on multi-stage damper control, especially in gas-fired burners, where it precisely adjusts the damper opening to achieve seamless switching between low and high combustion conditions. Interface type: It features an axial installation design, compatible with standard damper shaft diameters, and supports both horizontal and vertical installation. Protection class: IP54, capable of resisting dust and splashing water, making it suitable for industrial environments. Adjustment range: 0° to 90° mechanically adjustable. The yellow cam (ST1) sets the low combustion damper position, the red cam (ST2) sets the high combustion position, and the blue cam (MV) controls the opening and closing of the solenoid valve. Core functions: Multi-cam segmented control, manual adjustment and mechanical limit, safety and reliability design. Typical application scenarios Gas burner: Adjust the amount of combustion-supporting air to optimize combustion efficiency and reduce NOx emissions. HVAC system: Control the fresh air / return air dampers to maintain indoor air quality and temperature balance. Industrial ventilation: Monitor the pressure difference of the fan to prevent pipe blockage or fan failure.

Schneider shampoo actuator STAB B0.3618 2N36 L

Schneider shampoo actuator STAB B0.3618 2N36 L STAB B0.3618 2N36 L (is a high-precision electric actuator specially designed for industrial combustion systems. It is mainly used to control damper opening to optimize combustion efficiency and safety. Power supply type: Supports 230V AC/50Hz standard power supply, compatible with industrial environment requirements. Protection level: IP40 (dust-proof, vertical drip-proof), adapts to conventional industrial scenarios, but needs to avoid high humidity or dust-intensive environments. Core functions: one. Multi-cam segment control Low-combustion/high-combustion switching: The positions of low-combustion and high-combustion air doors are set separately through independent cams, such as the yellow cam (ST1) corresponding to the small fire state (recommended scales 30~40), and the red cam (ST2) corresponding to the large fire state (recommended scales 60~70). The two can be accurately switched through mechanical limits. Solenoid valve linkage: The blue cam (MV) is linked to the main gas solenoid valve to ensure that the damper opening and gas flow are adjusted simultaneously to avoid the risk of fire. Two. Manual adjustment and mechanical protection Convenience of on-site debugging: The cam can be manually rotated without powering up, and the damper position is intuitively set through the dial, which is suitable for fine calibration in the early stages of installation. three.High precision control and reliability Quick response: 90° stroke time ≤150 seconds to ensure timely adjustments under dynamic working conditions. Application scenario: It is specially optimized for gas/fuel burner damper control, which can achieve accurate adjustment of air-fuel ratio. Gas combustion engine: adjusts the amount of combustion air, optimizes combustion efficiency, and reduces NOx emissions.

Bentone gas burner BG400M

Bentone gas burner BG400M Bentone brand industrial-grade gas burners adopt dual-section fire control technology and are specially designed for medium-sized thermal energy equipment such as boilers and hot air furnaces. Heat output: 270,000 kcal/hour (about 318kW), covering medium-sized industrial heating needs. ‌Fuel type‌: adapted to natural gas/LPG, gas supply pressure of 0.2MPa. ‌Control method‌: Supports single-segment/double-segment/proportional adjustment mode switching. ‌Motor configuration‌: 230V/50Hz/250W asynchronous motor drive. Fuel interface: supports gas access on both sides of the left/right, equipped with a slow-opening solenoid valve and a dual-valve group design to ensure safe opening and closing. Functions: Multi-fuel compatibility and efficient combustion, intelligent control and safety protection, modular design and maintenance convenience.

Brahma solenoid valve E6G AP 1-2 AFD5 (13707512)

Brahma solenoid valve E6G AP 1-2 AFD5 (13707512) Product code: 13707512 Category: Burner accessories BRAHMA brand industrial-grade gas solenoid valve, a normally closed safety cut-off device specially designed for burner systems. This solenoid valve belongs to the BRAHMA E6G series, and is core to be used for safe opening and closing of gas burners and flow regulation, and achieves combustion efficiency optimization and safety protection through precise control of gas on and off. Its design focuses on multi-stage control, especially suitable for burners from brands such as BALTUR and Riello. Power supply type: 230V AC/50Hz, compatible with industrial environment requirements. Protection level: IP65 (dust-proof, water-spray-proof), adapted to high humidity or dust-intensive environments. Core functions: closed and slow opening control, high-precision flow adjustment, intelligent control and reliability. Typical application scenarios Gas boiler: adjust the main gas flow, optimize the air-fuel ratio with the damper actuator, and reduce NOx emissions. Industrial burners: Control the gas supply during the preheating phase to prevent deflagration. HVAC system: linking with the thermostat to realize automatic switching of heating/cooling mode.

Honeywell pressure regulating valve 1803（Main ORI 1 1-4''）

Honeywell pressure regulating valve 1803（Main ORI 1 1-4''） MODEL:1803 SPRING:2.0-3.0PSIG ORIFICE:3/4" SIZE CON: 2 INCH SCREWED Pressure regulating valve:It is a high-precision pressure control device specially designed for industrial gas systems. Its core is used for pressure regulation of natural gas, liquefied petroleum gas (LPG) and non-corrosive gases. Core functions: high-precision pressure regulation, safety protection and reliability, modular design and maintenance convenience.