Steinen Oil mouth 20.00 60°SS

Steinen Oil mouth 20.00 60°SS Category: Burner accessories The Steinen 20.00 60° SS nozzle is a high-performance atomization component designed for industrial combustion systems. "20.00" may indicate the flow rate of the oil nozzle Specifications: It is suitable for medium and large combustion equipment needs, and belongs to the high-capacity model in the SS (semi-solid) injection series. Injection angle: 60° wide-angle coverage, optimize the combustion chamber space utilization, balance the flame concentration and heat distribution uniformity‌. Functions: atomization mode, energy efficiency control, system compatibility. Typical Applications: Industrial burners: such as BALTUR SPARKGAS series combustion machines, used in boilers, kilns and other high-temperature scenarios‌. ‌Large-scale heating equipment‌: Integrated into commercial heating systems, meeting the stable combustion needs of the 20-75L/h flow range‌.

RIELLO GAS9P-M、GAS9-2、P300TG-PG、RS310M MZ、RS410M MZ wind leaves (3006155)

RIELLO GAS9P-M、GAS9-2、P300TG-PG、RS310M MZ、RS410M MZ wind leaves (3006155) Product code: 3006155 Category: Burner accessories RIELLO air blades are the core airflow control component of the Riya Road burner. General adaptability: Compatible with GAS9P-M, GAS9-2, P300TG-PG, RS310M MZ, RS410M MZ and other Riello burner models, adopting standard interface design. The impeller diameter is matched with a 300mm air duct system, and the aerodynamic structure is optimized to adapt to the combustion requirements of different power segments. Technical features: noise control, high temperature resistance structure, intelligent linkage.

RIELLO SIEMENS servo motorSQN73.2C4A20（20203492）

RIELLO SIEMENS servo motorSQN73.2C4A20（20203492） Model number: SQN73.2C4A20 Product number: 20203492 Application scenario: Suitable for RIELLO medium and large gas/fuel burners (such as GAS9 series, RS series), it is used to control the opening or air-fuel ratio adjustment of the damper baffle to ensure the stability and energy efficiency of the combustion process. Protection level: IP54 Power supply specifications: AC 220-240V (±10%), 50/60Hz, power approximately 6VA.

Schneider servo motor STA6 B3.41-6 3N32 L

Schneider servo motor STA6 B3.41-6 3N32 L Category: Burner accessories Model: STA6 B3.41-6 3N32 L This motor belongs to the STA series and is designed based on the STM series products and is equipped with a relay with a control unit. Usually 230V power supply is used, suitable for 50HZ or 60HZ frequency environments. Functions: Accurate positioning control, flexible steering, and a wide range of application scenarios.

Riello tornado disc144 (3013626)

Riello tornado disc144 (3013626) Product number：3013626 Category: Burner accessories It is mainly used to promote the mixing of fuel and air to achieve efficient combustion. The cyclone disc 144 is usually installed on the combustion head of the burner. The material is generally a metal alloy that is resistant to high temperature and wear, and can work stably in a high temperature environment. Its appearance is disc-shaped, with a specific shape of blades or flow guide structure on the surface. It is connected to other components of the burner through a specific installation method. The overall structure is compact and the design is exquisite, which is an important part of the burner achieving good combustion performance. Function: Promote air and fuel mixing, stabilize flame, and optimize combustion effect.

Riello RS5 test mouth（3008504）

Riello RS5 test mouth（3008504） Product number：3008504 Category: Burner accessories It is mainly used for burner operating status monitoring and debugging. It is convenient to be installed in the designated location of the burner. There are generally clear installation marks and adaptation interfaces to ensure the accuracy and stability of the installation and can adapt to the high temperature, airflow and other working environments during the burner operation. Functions: stress testing, temperature monitoring, commissioning and maintenance.

Riello RS310 motor MS3 132S2 B5 (3013565)

Riello RS310 motor MS3 132S2 B5 (3013565) Category: Burner accessories. It is a motor with specific technical specifications and application functions. It is often used in the industrial field and provides power driving for equipment. Structural design: It uses cast iron and other shells, which have good strength and heat dissipation performance, and can adapt to certain harsh working environments. The overall structure is compact and easy to install on various mechanical equipment. Protection level: IP55 sealed design can prevent dust from entering the motor and resist water spray at a certain angle, suitable for more complex industrial environments. Power: 7.5KW Functions: Power output, efficient energy saving, stable operation, adapt to various working conditions.

Riello RS310 burning head (20204055)

Riello RS310 burning head (20204055) Category: Burner accessories The RS310 combustion head is usually made of high-temperature and corrosion-resistant metal materials, which can work stably in a high-temperature combustion environment. Its structural design is consistent with the RS310 burner as a whole, installed at the front end of the burner, and works in concert with fans, gas valves and other components; it has specific air channels and gas outlets inside to ensure that air and gas can be mixed and sprayed according to design requirements. Its size and shape are optimized to adapt to the output range and combustion characteristics of the burner. Function: Adjust combustion parameters, support two-stage fire adjustment modes in smooth transition, integrate RMG88 control box, and has fault self-diagnosis and flame monitoring functions.

Riello RS410 motor MS3 132M1-2 B5 (20050961 or 20201408)

Riello RS410 motor MS3 132M1-2 B5 (20050961 or 20201408) Category: Burner accessories The aluminum alloy die-casting machine base is used, and the weight is about 30% lighter than the cast iron shell. The installation size complies with IEC standards and the protection level is IP55 (dust-proof, water-proof), which can resist dust intrusion and low-pressure water flow impact. It is suitable for industrial environments. Rated voltage is 380V, supports dual-frequency operation of 50/60Hz. B5: Flange installation method, the motor shaft is vertically downward, making it easy to integrate into the compact structure of the burner. Power: 9.2kW Mainly used for key components such as fans, oil pumps, etc. of RS410 series burners. Functions: power drive, operating characteristics, adaptability and scalability.

SIEMENS sensor-detector AGG5.310

SIEMENS sensor-detector AGG5.310 AGG5.310 is an inductive sensor. Suitable for LMV5, usually used with signal disc (outer diameter 70mm). It works using the principle of electromagnetic induction and contains components such as coils, oscillators and other components. The shell has dust-proof and waterproof functions, and its induction distance is determined by the coil diameter and is related to the size and material of the metal object to be tested. The main function is to detect the approaching situation of an object, generate high-frequency signals through the oscillator, and cause the coil to emit an alternating electromagnetic field. When a metal object enters the electromagnetic field, it is excited to generate eddy currents, which in turn causes the oscillator to attenuate. The threshold switch controls the shutdown of the output stage based on the specified attenuation value to determine whether there are metal objects approaching. It can be used to detect the position, speed and status of the objects, etc., and is widely used in industrial fields such as machinery, chemical industry, and metallurgy.

Sauter pressure switch DSB140F001

Sauter pressure switch DSB140F001 DSB140F001 is an industrial-grade pressure switch, mainly used for pressure monitoring and system protection of liquid, gas and steam media. It adopts brass pressure sensor, suitable for non-corrosive media environments. Protection level: IP65 Functions: Pressure monitoring, pressure control, high-precision measurement. Typical applications include pump and valve control and pressure safety protection of hydraulic systems and air-pressure equipment, which are particularly suitable for compact installation of pipes or walls.

Sauter pressure switch DSB158F001

Sauter pressure switch DSB158F001 DSB158F001 is an instrument used for pressure measurement and control. It has the characteristics of high precision and high stability and is widely used in the industrial field. Electrical protection level: The protection level is IP65, which can effectively prevent dust and splash water, and can adapt to harsh industrial environments. Pressure pipe connection method: The pressure pipe connection method is G1/2" outer wire, which is convenient for connecting to the pipeline system. Functions: Pressure detection, switch control, adjustable parameters.

Sauter pressure switch DSB158F931

Sauter pressure switch DSB158F931 DSB158F931 is a high-precision device designed for industrial pressure monitoring and control. This model belongs to the DSB series products and uses brass pressure sensors, suitable for non-corrosive media environments‌. Model: DSB158F931 Suitable for gas or liquid media. Protection level: IP65, dustproof and splashproof. Electrical interface: supports 250V voltage level to meet high load control needs. Functions: high-precision pressure detection, dual set point intelligent control, multiple safety mechanisms, flexible expansion capabilities, industrial-grade reliability.

Steinen oil mouth 4.00 60°S

Steinen oil mouth 4.00 60°S Oil mouth 4.00 60°S is a mechanical atomization nozzle commonly used in fuel combustion engines, using a 60-degree standard spray angle and 4.0 flow specification‌. Spray angle: 60° fixed cone angle (S-type is solid spray structure)‌ Flow specification: Standard flow level No. 4.0, suitable for medium and high pressure fuel system‌ Material options: Copper alloy or stainless steel body, brass atomized core structure Solid cone spray mode (S-type) to achieve uniform fuel distribution. Function: Fuel atomization, uniform mixing, adapt to different oil pressures.

Steinen oil mouth 6.00 60°SS

Steinen oil mouth 6.00 60°SS Oil mouth 6.00 60°SS is a mechanical atomization nozzle commonly used in fuel combustion equipment. "6.00" represents the flow specification of the oil nozzle, "60°" represents its atomization angle, and "SS" usually represents the semi-solid atomization shape. Flow specification: The flow rate is 6.00GPH (gallons per hour), which is a medium and large flow nozzle, and can provide the corresponding fuel volume according to the needs of combustion equipment. Atomization angle: The atomization angle is 60°, which can make the fuel evenly spray out within a certain angle range, making it easier to mix with the air better. Atomization shape: It is semi-solid, and a semi-solid atomization cone is formed after fuel is injected. The oil mist distribution is relatively uniform, and it is suitable for combustion scenarios where fuel atomization distribution has specific requirements. Function: efficient fuel atomization, promote uniform mixing, and adapt to different oil pressures.