RIELLO Motor（3005820）

RIELLO Motor（3005820） Motor is an AC asynchronous motor designed specifically for burner systems. It is mainly used to drive the air impeller and oil pump of the burner, and is suitable for Riello 40G series burners (such as G20, G20LC, G20S). Voltage/Power: 230V AC ±10%, 50Hz, maximum power 150W, start current ≤3A, running current ≤1.2A. Speed: no-load speed is 2750 RPM, and the output speed is about 1400 RPM after deceleration through the burner gearbox, matching the operating requirements of the fan and oil pump. Purpose: Mainly used for damper adjustment or servo control of gas/fuel burners to ensure the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS5D, GS20, BG300‌ and other burner series. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signals or analog quantity to achieve accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as BG300-2) to smoothly switch power gears. two.Safety protection‌ Built-in overload protection, triggering LED alarms during failure (such as yellow flashing prompts the protection device to fail). Comply with ‌EN676 standard‌, adapted to PELV safe voltage (18-30V DC). three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive. Typical Application ‌Shield drive for gas burners‌ (such as Riello GS20, RS5D series). ‌combustion control system for industrial boilers and drying equipment. Categories：Burner Accessories RIELLO

RIELLO RS190 Motor (20050960)

RIELLO RS190 Motor (20050960) RS190 Motor‌: It is a special motor for the Riello RS190 series. Purpose: It is mainly used for servo control of gas/fuel burners, adjusting the damper opening to achieve the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS190 series burners‌ (such as RS190-2, RS190-3, etc.). Voltage/current: 24V DC, rated current ≤ 30mA (closed circuit), instantaneous inrush current ≤ 10A (<2s)‌. ‌Interface type‌: 4-pin M12 socket, supports PNP signal input/output‌. Protection level: IP55 (dust-proof and waterproof), suitable for industrial environments. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signal or analog quantity to ensure accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as RS190-2), which can smoothly switch power gears‌. two.Safety protection‌ Built-in overload protection, triggering LED alarm when a fault is caused (such as yellow flashing to indicate a faulty protection device)‌ Adaptable to PELV safe voltage (18-30V DC)‌ three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive‌. Typical Application ‌Shake drive for gas burners‌ (such as the Riello RS190 series). ‌combustion control system for industrial boilers and drying equipment‌. Categories：Burner Accessories RIELLO Keywords: RS190

Fisher pressure reducing valve HSR-1628-87959

Fisher pressure reducing valve HSR-1628-87959 HSR-1628-87959 is a spring-loaded pressure reducing valve produced by Fisher in the United States. It is specially designed for gas systems and is suitable for medium and low pressure pressure regulation of natural gas, liquefied petroleum gas, artificial gas and other media. Functional Features: One. Self-operated pressure regulation The outlet pressure is stabilized by balancing the spring force and the medium pressure, without external energy driving, high pressure regulation accuracy and small outlet fluctuations. two. Safe pressure relief mechanism Built-in pressure relief device. When the outlet pressure exceeds the set value, the diaphragm will automatically leave the valve seat to release the pressure to prevent the system from overpressure. Three. Wide operating conditions adaptability Pressure range: The maximum inlet pressure is 8.6 bar, and the adjustable outlet pressure range is 0.34-34.5 bar. Temperature range: Operating temperature covers -29"C to 82°C, adapting to extreme environments. Four.Flexible installation and maintenance Compact structure, supports installation in any direction, suitable for space-constrained scenarios. Connection method: internal thread (DN25 diameter) Applicable media: natural gas, liquefied petroleum gas, air, etc.

Fisher pressure reducing valve MR95H

Fisher pressure reducing valve MR95H MR95H is a direct-acting pressure regulator produced by Fisher in the United States. It belongs to the MR95 series industrial pressure reducing valves and is specially designed for rigorous pressure control applications. Functional Features: ‌One.Wide range pressure regulation‌ It adopts a spring film structure, with an adjustable outlet pressure range covering 0.35-10.3 bar (low pressure configuration) or 1.0-27.6 bar (high pressure configuration). It is suitable for various media such as natural gas, steam, and nitrogen. ‌Two. High temperature and high pressure adaptability‌ ‌Working temperature‌: Standard type is suitable for -29℃ to 82℃, high temperature type (MR95HT) can withstand 343℃‌. ‌Maximum inlet pressure‌: 600 psig (41.4 bar), meeting industrial high pressure demand‌. ‌Three.Modular Design‌ Supports quick replacement of valve inner parts for easy maintenance; provides threaded (NPT) or flange connections, with dimensions covering 1/4 to 2 inches (DN6-DN50). ‌Four.Safety and precision control‌ The built-in synthetic rubber valve seat enables tight shutdown, and the differential pressure configuration model (such as MR95HD) can accurately control the pressure differential. Typical application scenarios ‌Industrial gas system‌: Natural gas and liquefied petroleum gas pressure regulation‌. ‌Steam system‌: Boiler feed water, superheated steam to reduce pressure‌. ‌Special process‌: nitrogen purge, test equipment pressure control‌.

Fisher pressure reducing valve MR98H

Fisher pressure reducing valve MR98H MR98H is a direct-acting pressure regulator produced by Fisher. It belongs to the MR98 series industrial pressure reducing valve, designed for high-pressure gas and steam systems. Drive mode: pneumatic or manual (T-shaped handle) Functional Features: ‌One. High voltage regulation capability‌ The outlet pressure can be adjusted from 1.0 to 13.8 bar (15 to 200 psig), which is suitable for high-pressure control of natural gas, steam, nitrogen and other media. ‌Two.Modular Design‌ Supports quick replacement of valve inner parts for easy maintenance; provides threaded (NPT) or flange connections, sized to DN6 to DN25 (1/4 to 1 inch)‌ T‌hree.Safety and precision control‌ The built-in synthetic rubber valve seat enables tight shutdown, and the differential pressure configuration model (such as MR98HD) can accurately control the pressure differential. ‌Four. Broad operating condition adaptability ‌Applicable media‌: gas, liquid, air and steam‌. Typical application scenarios ‌Industrial gas system‌: Natural gas and liquefied petroleum gas pressure regulation‌. ‌Steam system‌: Boiler feed water, superheated steam to reduce pressure‌. ‌Special process‌: nitrogen purge, test equipment pressure control‌. Categories：Burner Accessories Fisher

Fisher pressure reducing valve 627-1217-2022629 5-20PSI

Fisher pressure reducing valve 627-1217-2022629 5-20PSI 627-1217-2022629 is a direct-acting pressure reducing valve, belonging to the Fisher 627 series pressure regulator, specially designed for gas media such as natural gas, liquefied petroleum gas, etc., and is suitable for medium and high pressure systems. Functional Features: ‌One. Self-reliable pressure regulating‌ The spring film structure realizes automatic adjustment of outlet pressure, no external energy drive required, high pressure regulation accuracy and sensitive response. ‌Two. Wide pressure range adaptation‌ ‌Export pressure‌: 5-20 PSI (0.34-1.38 bar), meeting user-specified needs‌. ‌Inlet Pressure‌: up to 17.2 bar (250 PSI), suitable for high-pressure air sources‌. ‌Three. Flexible installation and maintenance‌ Supports installation in any direction, and the valve body is connected by DN50 (2-inch) NPT thread. It can be maintained online and has a modular design that facilitates quick replacement of valve inner parts‌. ‌Four.Safety and Reliability‌ Built-in pressure relief valve and tight shutdown function to prevent system overpressure; the valve core is made of steel/stainless steel + nitrile rubber, which has strong corrosion resistance. Applicable media: natural gas, liquefied petroleum gas, artificial gas, air, etc. Typical applications: urban gas pressure regulating stations, industrial gas supply systems, burner supporting facilities or high-pressure gas source decompression.

Fisher pressure reducing valve EZR DN50 300RF 130-200PSI

Fisher pressure reducing valve EZR DN50 300RF 130-200PSI EZR series DN50 300RF (outlet pressure 130-200 PSI) is a commander-acting pressure reducing pressure regulator designed for high-pressure systems such as natural gas and industrial gases. Functional Features: ‌One. High-voltage precision adjustment‌ Adopting a pilot structure, the outlet pressure can be accurately controlled at 130-200 PSI (8.96-13.79 bar), suitable for high-pressure gas delivery systems. ‌Two. Strict working conditions adaptability‌ ‌Inlet Pressure‌: up to 1050 PSIG (72 bar), meeting the needs of high-pressure gas sources‌. Temperature range: -29℃ to 127℃, adapting to extreme environments. ‌Three.Safety and Reliability‌ ‌Quick shutdown‌: EZROSX models are equipped with OS2 cutting device, which automatically cuts off airflow when overpressure/underpressure. ‌Debris-proof design‌: Stainless steel inlet filter and metal plug structure protect the valve membrane, extending the maintenance cycle‌. F‌our.Modular Maintenance‌ The DN50 (NPS 2) valve body supports 300RF flange connection, which can be repaired online and is convenient to replace the valve inner parts. ‌Noise Reduction Design‌: Standard cage reduces noise by 6-8 dBa‌. Typical applications: high-pressure pressure reduction at natural gas distribution stations, industrial gas equipment gas supply system.

Baltur motor XS 5-3007

Baltur motor XS 5-3007 XS 5-3007 is a single-phase capacitor-starting asynchronous motor designed for burners. It is produced by Italian company SIMEL. It is mainly used to drive the fan impeller of the burner and provide stable combustion air. Rated power: 0.37 kW (at 50Hz). Voltage/Frequency: 230V AC, 50Hz, current 2.5A. Capacitor specification: 14 μF, for start-up assistance. Speed: 2800 rpm (two-pole motor, synchronous speed 3000 rpm, slip rate is about 6.7%) Protection level: IP44. Dust-proof and splash-proof, suitable for humid or dusty industrial environments. Single-phase capacitor starts asynchronous motor: starts with phase separation of capacitors, and the capacitor exits during operation. The structure is simple and reliable, suitable for intermittent loads such as burners. Direct drive: The motor shaft is directly connected to the fan impeller, no additional transmission is required, reducing energy loss. Core functions: stable air supply, reliability and durability, and low maintenance requirements. Application scenarios: One. Gas Burner It is suitable for burners such as Baltur brand TBG35, TBG35P, TBG35PN, etc., and is used for the supply of combustion air for boilers, furnaces, and industrial heating equipment. Two. Light oil burner Some models (such as the TBL series) may require a dual motor configuration, with the XS 5-3007 driving the fan and the other motor driving the oil pump for oil and gas mixed combustion. Three.Other industrial equipment It can be used as a power source for small fans and pumps, and is suitable for scenarios with high volume and reliability requirements.

Schneider RS5D motor (3002659)

Schneider RS5D motor (3002659) Product Number：3002659 Categories：Burner Accessories RS5D is a compact stepper motor designed for industrial automation and is a core component of the Lexium series of integrated drive solutions. Three-phase stepper motor: adopts open-loop control, accurately controls the rotation angle and speed through pulse signals, without encoder feedback, and is suitable for low-cost and high-precision positioning scenarios. Integrated drive design: The motor has built-in control circuit, supports various industrial communication protocols such as CANopen, Profibus DP, RS485, etc., and can be directly connected to PLC or motion controller to simplify the system architecture. AC voltage/frequency: 230VAC, 50/60HZ. Core functions: high-precision positioning control, flexible communication and configuration, reliability and durability, low maintenance requirements.

DUNGS solenoid valve MBE VB-080(274661)

DUNGS solenoid valve MBE VB-080(274661) Brand model: DUNGS MBEVB-080(274661) MBE VB-080 gas solenoid valve is specially designed for industrial and commercial combustion systems. It can realize the composite functions of gas filtration, pressure regulation, safety cut-off and flow control. It is suitable for neutral gaseous media such as natural gas, liquefied gas, artificial coal gas and so on. It has the characteristics of compact structure, convenient installation and stable operation. It is widely used for gas transportation safety control of boilers, incinerators, industrial kilns and other combustion equipment. Electrical specifications: 230VAC (+10%-15%), 50/60Hz Working pressure: 360mbar Applicable media: natural gas, LPG Working environment temperature range: -15°C-+60°C Core functions: gas safety cut-off, integrated filtration and pressure regulation, flow control and regulation, status monitoring and feedback, and adaptation to complex working conditions. Categories：Burner Accessories DUNGS

DUNGS solenoid valve MB-ZRDLE 407 B01 S20 (3970538)

DUNGS Solenoid Valve MB-ZRDLE 407 B01 S20 (3970538) Product Name:DUNGS Solenoid Valve MB - ZRDLE 412 B01 S20 DUNGS MB-ZRDLE 407 B01 S20 is a multi-functional combination valve that integrates filter, pressure regulator, double solenoid valve (V1/V2) and pressure monitoring interface. In the model, B01 represents a single regulator + double valve configuration, DLE represents slow-open flow regulation, and S20 corresponds to an output pressure range of 4-20mbar, with a maximum working pressure of 360mbar, in compliance with DIN EN 161 Class A 2 Category (solenoid valve) and DIN EN 88 Class A (regulator) standards. Ambient temperature: -15℃~+70℃ Maximum working pressure: 360mbar Made in Germany Core selling points: German original, integrated filtration/pressure regulation/safety cut-off, double valve safety protection, low differential pressure and high flow, DIN standard certification, easy maintenance. Applicable scenarios: Safety and flow control of gas combustion systems such as industrial burners, boilers, furnaces, and hot blast furnaces. Core functions: gas filtration and purification, precise pressure regulation, safety cut-off protection, flow control and monitoring expansion, convenient integration and installation. Keywords: DUNGS MB - ZRDLE 412 B01 S20, gas combination solenoid valve, industrial burner safety valve. Categories：Burner Accessories DUNGS

Dungs solenoid valve MB-ZRDLE 412 B01 S20

Dungs solenoid valve MB-ZRDLE 412 B01 S20 Germany's DUNGS MB - ZRDLE 412 B01 S20 gas combination solenoid valve is often used for safety and flow control in industrial combustion systems. Its core advantages are high flow rate under low differential pressure and dual-valve safety redundancy. This valve is a single regulator + dual valve (B01) configuration Output pressure: 4-20mbar Maximum working pressure: 360mbar Made in Germany Core selling points: German original, integrated filtration/pressure regulation/double valve safety cut-off, low differential pressure and high flow, DIN standard certification, easy maintenance. Applicable scenarios: Safety and flow control of gas combustion systems such as industrial burners, boilers, furnaces, and hot blast furnaces. Core functions: high-efficiency gas filtration, precise pressure regulation, double safety cut-off, flexible flow and monitoring. Keywords: DUNGS MB - ZRDLE 412 B01 S20, gas combination solenoid valve, industrial burner safety valve. Categories：Burner Accessories DUNGS

DUNGS Solenoid valve MVD 210-5 (263879)

DUNGS Solenoid valve MVD 210-5 (263879) Product model: MVD 210/5 Product name: DUNGS MVD 210/5 gas solenoid valve Maximum working pressure: 360mba Power supply parameters: 230V (allowed + 10%-15% fluctuation), 50 - 60Hz Protection level: IP54 Application: used in gas burners and various gas equipment Fuel: Suitable for 1, 2, 3 gas series and other non-corrosive neutral gaseous media. Commonly applicable fuels include natural gas, liquefied gas and other gases. Type: From the function classification, it belongs to a single-stage gas safety shut-off valve; from the control mode, it belongs to a normally closed solenoid control valve; from the connection form, it belongs to an internal thread connection solenoid valve; from the channel position, it belongs to a two-way solenoid valve. Keywords: DUNGS MVD 210/5 gas solenoid valve Condition: Brand new Function: Safe and accurate on-off control of gas passages of gas burners and various gas equipment. Applicable industries: Widely used in thermal energy, industrial automation, engineering machinery, petrochemical and other industries, such as boiler heating, asphalt heating and other related fields. Core features 1. The on-off response is quick, the opening time and closing time are both less than 1 second, and the gas can be cut off in time to ensure the safety of the equipment; 2. Supports manual adjustment of the main flow rate, and can be flexibly adapted according to the gas demand of different equipment; 3. Equipped with closed position monitoring terminal contacts to facilitate real-time control of valve status and improve system safety; 4. The protection level reaches IP54, which is suitable for a variety of industrial environments, and has a built-in 1mm mesh filter to reduce damage to the valve from impurities; 4. The working environment temperature range is -15℃ - +60℃, suitable for most working conditions. Germany's DUNGS single-stage gas safety solenoid valve that complies with EN161 standards adopts a normally closed design that shuts off when power is off. It has fast opening and closing characteristics, has a solid structure and does not require frequent maintenance. It adapts to the gas path safety control needs of a variety of gas equipment.

DUNGS Solenoid gas valve group W-MF-SE 507 C01 S22

DUNGS Solenoid gas valve group W-MF-SE 507 C01 S22 Product model: W-MF-SE 507 C01 S2 Product name: DUNGS W - MF - SE 507 C01 S22 gas solenoid valve group Caliber: 3/4" Inlet pressure range: 15 - 500mbar Adjustable outlet pressure range: 4 - 20mbar, power supply voltage: 230VAC Working frequency: 50 - 60Hz Operating power: 120/16w Electromagnet model: Mag.Nr.032/P Circuit board model: Art.Nr250607 Protection level: IP54 Pipe connection method: DUNGS exclusive mounting flange, turn to 3/4" internal thread Material: cast aluminum Application: Specially used for Weishaupt series burners. As a key control component of the gas path, it is responsible for the gas supply on and off and pressure regulation when the burner is working, ensuring the burner ignition, stable combustion and gas safety control during shutdown. Fuel: Suitable for gas series 1, 2, 3 and other non-corrosive neutral gaseous media. Common applicable fuels include natural gas, liquefied gas and other conventional gases. Type: From the purpose classification, it belongs to the burner-specific gas solenoid valve group; from the switching characteristics, it belongs to the quick-opening and quick-closing solenoid valve; from the installation adaptability, it belongs to the customized supporting solenoid valve group; from the functional attribute, it belongs to the pressure-adjustable gas control solenoid valve group. Keywords: Weishaupt burner special valve Condition: Brand new Functions: precise control of gas on-off, flexible adjustment of outlet pressure, exclusive adaptation to ensure compatibility, and stable operation protection in industrial environments. Applicable industries: core focus on thermal energy equipment, industrial combustion and other fields freight：Please consult for details DUNGS solenoid valve group W - MF - SE 507 C01 S22 is a core gas control component specially customized for German Weishaupt burners. It adopts a quick-opening and quick-closing design and integrates a specific control circuit board and electromagnet assembly. It has a compact structure and is adapted to the installation and working conditions of Weishaupt burners. It can accurately control the on-off and pressure adjustment of the gas path, providing core gas control guarantee for the stable and safe operation of the burner.

RIELLO Motor MS3 100L 2-2 B5

RIELLO Motor MS3 100L 2-2 B5 Product model: MS3 100L 2-2 B5 Product name: Riello three-phase asynchronous burner special motor MS3 100L 2 - 2 B5 Rated voltage: 380V three-phase AC Rated frequency: 50Hz Material: aluminum alloy die-casting Insulation class: F class Protection level: IP55 Operating temperature range: 20℃ - 40℃ Applicable objects: Riello series special burners Fuel: natural gas, liquefied petroleum gas, diesel and other conventional combustion fuels. Type: From the power type, it belongs to a three-phase asynchronous motor; from the adaptation scenario, it belongs to a burner-specific matching motor; from the installation method, it belongs to a B5 flange motor; from the shell material, it belongs to an aluminum alloy shell motor; from the operating characteristics, it belongs to an industrial-grade continuous operation motor. Keywords: Special motor for Riello burner Condition: Brand new Function: The core function is to provide stable and continuous driving force for the Riello burner fan to ensure quantitative and uniform transportation of air during the combustion process; through stable air supply, the fuel and air are fully mixed to improve combustion efficiency and reduce energy waste; it is linked with the burner control system to achieve synchronous start and stop, reducing the risk of failure of the combustion system due to power fluctuations, and ensuring the stability and safety of the combustion process. Applicable industries: Focus on fields related to heat source supply for burners, and are widely used in industrial furnaces, food processing, etc. freight：Please consult for details Core features 1. The aluminum alloy machine base is both lightweight and has excellent heat dissipation properties. It can quickly dissipate the heat generated during operation, avoid failures under high temperature conditions, and extend the service life. The 2.2-pole design has large starting torque and high speed, which can quickly drive the fan to reach the rated speed, adapt to the need for rapid start and stop of the burner, and reduce the impact of startup delay on combustion efficiency. 3. The protection level usually reaches IP55, has good dust-proof and water-spray-proof capabilities, and can adapt to the dusty and humid complex environment of industrial sites. 4. It has low noise and vibration during operation, which complies with the low-noise operation standards of industrial equipment and reduces noise interference to the working environment. This motor meets the working conditions of high-frequency start and stop of the burner and continuous operation. It can accurately match the power interface of the burner fan. It is the core power component to ensure the stable operation of the burner air supply system and is suitable for long-term continuous operation in industrial scenarios. Categories：Burner Accessories RIELLO