RIELLO Flange gasket (3005813)

RIELLO Flange gasket (3005813) Flange gasket:It is a sealing element for RIELLO burners, adopts a multi-layer composite structure design and is adapted to the burner flange connection system. Core functions: one.High-pressure sealing: plastic deformation is generated through bolt preload, filling the microscopic unevenness of the flange sealing surface (Ra value 3.2-12.5μm), and preventing gas or air leakage. t‌wo.Dynamic Compensation‌: Built-in elastic material layer (such as graphite/metal composite), maintains the sealing specific pressure (σg≥mPi) under thermal cycling or vibration conditions, and compensates for flange displacement‌. t‌hree.Medium protection: Oil-resistant and high-temperature resistance are adapted to the burner fuel/gas environment, and the working temperature covers -40℃ to 450℃. Burner system: used for key sealing nodes such as combustion chamber flanges and gas valve group connections, with a pressure bearing range of 0-10MPa‌.

RIELLO light sense QRB4B-B050B70B（3012091）

RIELLO light sense QRB4B-B050B70B（3012091） Product code:3012091 Category: Burner accessories QRB4B-B050B70B is a photoelectric flame detector dedicated to RIELLO burners. It adopts ultraviolet/infrared composite sensing technology and is mainly used to detect flame state. Functional Application‌ ‌Safety Interlock: Cooperate with the RIELLO40FS series burner control panel to cut off fuel supply within 0.5 seconds after flame failure. ‌Self-diagnosis function‌: LED status indicators provide real-time feedback to sensor working status (normal/fault/pollution alarm). Structural Design Industrial-grade protection: The stainless steel shell reaches IP65 protection level, with a temperature resistance range of -30℃ to +80℃, suitable for high dust environment in the boiler room. Modular interface: installed through M18 threads, equipped with 3-core shielded cable (including grounding wire), and signal output is compatible with NO/NC mode.

RIELLO switch button (3012080)

RIELLO switch button (3012080) Product code: 3012080 Category: Burner accessories The switch button is a special control component for RIELLO burners. It combines the functional characteristics of industrial-grade push button switches and relays, and is usually used for circuit control of burners and other equipment. Functional Features ‌one. Dual control mode‌: Integrate instantaneous trigger (non-locking) and self-locking holding functions, and adjust the mode through the number of presses to the burner start/emergency stop scene. ‌two. Safety interlock: Built-in relay contact set (1 normally open + 1 normally closed), which can directly control solenoid valves or signal circuits with ≤5A, realizing electrical isolation and power amplification. ‌three.Status feedback‌: The top has LED indicator (red/green two colors), showing the circuit on and off or fault status in real time (such as overload protection trigger). Application scenarios‌ ‌burner control‌: As the main control switch of the RLS series burner of the Leya Road, it realizes three-state switching of ignition, operation and emergency stop‌. System extension: Multiple devices (such as fans and oil pumps) can be connected in series through contacts, supporting PLC signal input.

RIELLO control box 530SE (3001156)

RIELLO control box 530SE (3001156) Product code: 3001156 Category: Burner accessories 530SE is a program controller dedicated to RIELLO burners, integrating ignition control and safety monitoring functions. Structural Design one.Modular terminals‌: Use plug-in terminals, which support remote control signal input (such as PLC or thermostat)‌ ‌two. Industrial Protection‌: Metal shells resist electromagnetic interference, working temperature range -20℃ to +60℃‌ Core functions‌ ‌one. Integrated ignition control‌: built-in high-voltage ignition transformer (output 10kV/16mA), directly drives the ignition electrode without external transformers‌. ‌two.Multi-mode operation‌: Supports intermittent operation of single-stage/dual-stage burners, suitable for gas/fuel engine models (such as 40G series, BS series). ‌three. Safety interlock‌: Monitor flame signals in real time, and cut off fuel supply within 0.5 seconds when the flame is turned off. Application scenarios: Burner control: Specially used for fuel burners such as G10/G20/G20S and GS5 gas burners, etc.

RIELLO control box CMO88.53D2 (20210859)

RIELLO control box CMO88.53D2 (20210859) Product code: 20210859 Category: Burner accessories Brand: RIELLO Model: CMO88.53D2 Product Usage: Combustion Program Controller The CMO88.53D2 is RIELLO's new generation intelligent controller for burners, specifically designed for multi-stage oil/gas burners. Function Introduction Combustion Process Control: It can be used for single-stage or two-stage burners, controlling the entire burner to operate according to the set program, including ignition, fuel supply, combustion power regulation, etc., ensuring a stable and safe combustion process. Status Monitoring and Display: It uses multi-color LEDs to display the burner's operating status, such as normal operation and fault alarms. It has a lock reset function. When the burner is locked due to a fault, the operation can be attempted to be resumed through a reset operation. Moreover, it can perform self-diagnosis through the number of LED flashes and other methods, facilitating users to quickly locate the cause of the fault. Safety Protection: It features multiple safety protection functions. For instance, when abnormal flame is detected, it can automatically cut off the fuel supply to prevent dangerous situations. It may also monitor parameters such as the burner's temperature and pressure. When these parameters exceed the set range, it triggers a protection mechanism to stop the burner's operation. Parameter Setting and Adjustment: It supports users in setting the burner's relevant operating parameters, such as ignition time, pre-purge time, combustion power, etc. It may also have an automatic adjustment function, such as PID control, which automatically adjusts the parameters based on the actual operation to optimize the combustion effect. Communication Function: It may have a communication interface, supporting communication with external devices, such as connecting to a burner management system or a remote monitoring platform, to achieve functions like remote monitoring and data transmission, making it convenient for operators to remotely understand the burner's operating status and adjust parameters.

RIELLO lon line（3008453）

RIELLO lon line（3008453） Product code: 3008453 Category: Burner accessories lon line: It is an ion wire/flame detection cable suitable for Riello burners' BS/FS/GS series, branded by Riello. Function: Mainly used for flame detection, to determine whether the flame exists by detecting the ionic current in the flame. When the burner is operating, the ion lines sense ions generated by the flame, forming an ion current signal and transmitting it to the burner's control system. If the flame is extinguished and the ionic current disappears, the control system will respond in time based on this signal, such as stopping the fuel supply, etc., to ensure the safety and stability of the burner operation, prevent dangerous situations such as "false flames", and ensure that the combustion process is carried out normally and safely.

RIELLO nozzle (3003814)

RIELLO nozzle (3003814) Category: Burner accessories nozzle:It is a key atomization component in the Riello burner system, designed for fuel injection optimization. Application scenarios: ‌Industrial Burner‌: Used in conjunction with RIELLO FS series combustion engines to achieve efficient combustion. Function: The main function is to spray fuel (such as fuel oil) in a specific shape and flow rate, and mix it with air well to achieve efficient and stable combustion in the burner. Nozzles with different atomization angles and shapes can meet the needs of different burners and combustion conditions. For example, nozzles with 60° atomization angles can distribute fuel injections within a certain range. Combined with the burner's air supply system, fuel and air can be better mixed and burned in the combustion chamber, which will help improve combustion efficiency and reduce fuel waste and pollutant emissions.

RIELLO burning cylinder end cone RS100-M use (3012056)

RIELLO burning cylinder end cone RS100-M use (3012056) Product number：3012056 Category: Burner accessories Mainly used in RS100 series two-stage fire gas burners. It has a conical structure and is resistant to high temperature and corrosion. It is installed at the end of the combustion cylinder and is an important part of the combustion head. Its size is suitable for the combustion cylinder of the RS100-M burner, which can ensure good connection and coordination with other components of the burner. Functions: guide the flame shape, promote fuel and air mixing, stabilize combustion, reduce nitrogen oxide emissions, and reduce noise.

RIELLO burning head RS300~400M BLU (3013297)

RIELLO burning head RS300~400M BLU (3013297) Product number：3013297 Category: Burner accessories The combustion head is an integral part of a forced ventilation integrated burner. It is a stainless steel conical structure and has high temperature resistance. It can be adjusted according to the output power. It is usually composed of components such as ignition electrodes, flame probes, gas distributors, flame stabilization disks, etc. The overall design is compact and works in concert with other components of the burner to ensure the stability and efficiency of the combustion process. Functions: Accurately control combustion, low nitrogen emissions, stable flames, efficient mixing of fuel and air, detect flame state, and adapt to different working conditions.

RIELLO soft oil pipe (3003769)

RIELLO soft oil pipe (3003769) Product number：3003769 Category: Burner accessories Mainly used for burners of RL28, RL34, RL38, RL50 and other models. The soft oil pipe has a length of 1000mm, with one end being a G1/4 inner wire joint and the other end being a G3/8 inner wire joint. It has a certain flexibility and can be bent to a certain extent, making it convenient for installation and arrangement in the burner equipment to connect different parts of the burner and realize fuel delivery. Function: Fuel delivery: As a channel for fuel transmission, fuel is transported from the fuel tank or other fuel storage device to the nozzle and other parts of the burner to provide fuel for the combustion process and ensure that the burner can work continuously and stably. Adapt to different installation environments: its length of 1000mm and its bendable characteristics enable it to adapt to the spatial layout inside and around the burner. It can be flexibly arranged in limited spaces, making it convenient to be installed in burner equipment of different structures, connecting fuel-related components that are a certain distance away. Fuel resistance characteristics: The soft oil pipe material has oil resistance, can resist fuel corrosion, and is not prone to aging, corrosion and other phenomena due to contact with fuel, ensuring that the oil pipe will not be damaged or leaked due to material problems during long-term use, and ensuring the safety and stability of fuel delivery. Adapt to temperature changes: It has certain heat resistance, can work normally within a certain temperature range, can adapt to the surrounding temperature environment when the burner is working, and will not be damaged due to high temperatures. At the same time, it can maintain a certain flexibility in a low temperature environment, and does not affect the normal delivery of fuel.

SIEMENS flame amplifier AGQ3.1A27

SIEMENS flame amplifier AGQ3.1A27 flame amplifier AGQ3.1A27:It is a key component used in flame detection system and is mainly used in conjunction with SIEMENS-related burner program controllers. Model: AGQ3.1A27. Power supply parameters: The power supply voltage is 220-240V, power is 4.5VA, power supply frequency is 50-60Hz. Electrical protection level: IP40. Cable length: 500mm. Adaptive components: Can be used with SIEMENS's QRA series flame detectors or ion probes, and are suitable for LME series, LMO88.6 (RMG88) series program controllers. Functions: signal conversion, flame monitoring, interface adaptation.

SIEMENS control box LOA24.171B27

SIEMENS control box LOA24.171B27 As the core component of the SIEMENS combustion control system, LOA24.171B27 is a program controller designed for medium and large fuel/gas burners. Multi-fuel adaptation: supports intermittent operation control of fuel, gas and dual-fuel burners. Safety monitoring: Integrated flame monitoring, pressure switch protection and fault self-diagnosis functions. ‌Flexible Control Mode‌: Suitable for combustion systems with multi-stage fire or continuous proportional adjustment. Voltage: AC 220V ±10%. Fuel type: natural gas/fuel (maximum fuel consumption ≤30kg/h). Control method: microprocessor program control, with communication extension interface. Protection level: IP40 (standard industrial protection). Output frequency: 50Hz. Functions: combustion process control, flame monitoring and protection, air pressure monitoring, damper control.

SIEMENS control box RMO88.53C2（3013071）

SIEMENS control box RMO88.53C2（3013071） As a key component of the SIEMENS combustion control system, RMO88.53C2 (3013071) is a high-performance burner program controller designed for medium and large industrial combustion equipment. ‌Multi-fuel adaptation‌: Supports safety control of fuel, gas and dual-fuel burners. ‌Precise timing control‌: Integrated microprocessor manages ignition, pre-purging and post-purging processes. Voltage range: AC 220V ±10%. Control mode: timing control. Protection level: IP40 (dust-proof design). Communication interface: Optional RS485 extension (needed to be combined with special modules).

SIEMENS pressure switch QPL15.150B

SIEMENS pressure switch QPL15.150B QPL15.150B is an industrial-grade high-precision pressure monitoring switch designed for burner systems. Core functions include: Pressure threshold control: Automatically trigger the circuit to be turned on and off, responding to pressure changes (adjustment range 0-150bar). ‌Media Compatibility‌: Suitable for gas (class 1/2/3) and neutral gaseous media, withstand working environments of -25°C to +85°C. ‌Quick response‌: The reaction time is ≤0.5 seconds when pressure fluctuates, ensuring system safety. Rated voltage: 230V AC (maximum current 8A). Protection level: IP40 (dust-proof design) Interface type: threaded joint Structural characteristics ‌Adjustment Design‌: Knob dial adjusts the switch point without additional pressure gauge calibration. ‌Installation Adaptability‌: Supports direct installation or fixation through an adapter. ‌Seism resistance‌: Strengthen structural design to adapt to industrial vibration environment. Typical application scenarios: gas boiler pressure safety monitoring, industrial burner overpressure protection system, compressed air pipeline pressure control.

SIEMENS pressure switch QPL25.500B

SIEMENS pressure switch QPL25.500B QPL25.500B is a compact pressure monitoring device specially designed for combustion equipment, mainly used for pressure control and safety protection of gas systems. QPL25.500B is suitable for gases in gas 1, 2, and 3 and other neutral gaseous media. Typical application scenarios include industrial burners, boilers, heating equipment, etc., and are used to monitor gas pressure in real time to ensure stable operation of the system. Pressure range: adjustable range is 100-500mbar. The protection level is IP54, which can be dust-proof and splash-proof. Electrical: Supports AC 250V or DC 250V operating voltage, rated current AC 6A/DC 1A. Core functions: pressure monitoring and control, overvoltage protection, anti-interference design, ease of use and maintenance, compatibility and application.