Schneider servo motor STA13-11 B0.36-8 3N23L

Schneider servo motor STA13-11 B0.36-8 3N23L STA13-11 B0.36-8 3N23L belongs to the BCH series servo motor, specially designed for industrial automation scenarios, and is suitable for mechanical systems that require fast response and precise positioning. Functional Features: one.Control mode It supports three control modes: position, speed and torque, and can be flexibly configured through digital input or bus communication (such as Modbus and EtherCAT). two. Dynamic performance Speed ​​response: The speed loop bandwidth reaches 3.2kHz, supports fast start and stop and acceleration and deceleration, and is suitable for high-speed mounting scenarios in electronic manufacturing. three.Safety and reliability Protection function: Built-in overvoltage, undervoltage, overheating, and overload protection, and fault signals can be output through relays. four.Interface and compatibility Adaptive drive: It needs to be used with Schneider Lexium series drives (such as Lexium 18ME, Lexium 23), and supports plug and play and automatic tuning. Application scenarios: Commonly used in burner control, material handling and rubber and plastic machinery, such as the use of burner servo motors to achieve precise flow regulation.

Weishaupt ignition transformer W-ZG 01-V

Weishaupt ignition transformer W-ZG 01-V W-ZG01/V is a special accessories for Weishaupt burners in Germany. It is a high-pressure ignition device designed for gas burners. It is mainly used in industrial boilers, furnaces and heating equipment to ignite gas mixtures by generating high-voltage electric sparks. Output voltage‌: double-stage 2×9KV high-voltage output‌. ‌Output current‌: 20mA, suitable for WG/WL series gas burners‌. ‌Power input‌: 230V/50-60Hz, power of 100VA‌. Adaptive models: Weishaupt WG5/WG10/WG20 series gas burners, WL5/WL10 series low-nitrogen burners and WGL series oil and gas dual-purpose burners. Functional Features: one.Ignition mechanism: High-voltage pulse generation: Through the principle of electromagnetic induction, the 230V input voltage is boosted to 9kV, creating an electric spark between the ignition electrodes, breaking down the gas-air mixture. two.Safety protection Overload protection: Built-in current limiting circuit, which automatically cuts off the power supply when the output is short-circuited or the load is abnormal to prevent equipment from being damaged. three.Control interface Signal input: supports dry contact signals of the burner controller to realize the linkage control of ignition and flame detection.

Weishaupt 600mm ionization cable（21710417022）

Weishaupt 600mm ionization cable（21710417022） Weishaupt ionization cable 21710417022 (600mm) is a flame monitoring component designed for gas burners to transmit ionic currents to detect the presence of flames and ensure the safe operation of the burner. The cable works through the ionization effect: when the flame is formed, high-temperature gas is ionized to generate ionic current, and the cable transmits this current signal to the burner controller (such as Weishaupt CU500) to achieve real-time flame monitoring. Operating voltage: Usually 24V DC (compatible with Weishaupt burner controller), maximum withstand voltage 1000V AC. Current capacity: ionic current range 0.1~2mA, matching the burner flame detection sensitivity. Length and interface: 600mm standard length, equipped with M8 or M12 waterproof connectors (such as Weishaupt dedicated interface) on both ends, supporting quick plug-in and unplug. ‌Functional Features‌: Used to detect the ionization signal of the burner flame and feed back to the control system to achieve flame out protection. The cable structure is deeply compatible with the Weishaupt burner ignition system (such as W-ZG series transformers). Application scenarios: Mainly equipped with Weishaupt gas/oil burners, such as WG/WL series industrial boiler equipment.

RIELLO RS310-M BLU probe (20042841)

RIELLO RS310-M BLU probe (20042841) Product code: 20042841 The RIELLO RS310-M BLU probe is the core component designed by Riello for gas burners, mainly used for flame monitoring and combustion state control. Operating voltage: Usually 24V DC (compatible with RIELLO CU series controllers), maximum withstand voltage 500V AC. Ion current range: 0.1~2mA, matching the burner flame detection sensitivity. compatibility Adaptive models: RS 310/M BLU, RS 410/M BLU and other series of burners must be used with Riello CU500 or Siemens LMV52 controllers. Protection level: IP65 dust-proof and waterproof, suitable for humid or dusty environments. Functions: core functions of flame detection, proportional adjustment control, harsh environment resistance design. This probe adopts the ionization principle and uses the ionic current signal generated during combustion to feedback the flame state in real time. As an optional accessory for the RS 310/M BLU series burners, this probe can be linked to the PID ratio regulator to achieve a “proportional adjustment” operation mode. By monitoring the flame intensity changes, the probe feedbacks signals to the controller and dynamically adjusts the gas butterfly valve and damper openings to keep the air-gas mixing ratio optimal, thereby reducing NOx emissions (≤80 mg/kWh) and improving combustion efficiency.

RIELLO ignition rod RS5~BS4-M (3008932)

RIELLO ignition rod RS5~BS4-M (3008932) Product code: 3008932 As the core ignition assembly of Riello burners, the RS5~BS4-M is specially designed for gas burners to generate high-voltage electric sparks to ignite gas-air mixtures. Adaptive model: specially designed for RielloRS5~BS4-M series burners. ‌Working voltage‌: 220V, deep compatible with the burner control system‌. ‌Environmental tolerance: The working temperature reaches 90℃, meeting industrial-grade stability requirements‌. RG5S: Corresponding to Riello Gulliver RG series single-stage fire light oil burner. Functional Features ‌Ignition performance‌: It is made of high-temperature resistant ceramic material, with ignition delay ≤5ms, and supports high-frequency ignition (1000 times/hour). ‌Safety Design‌: Built-in ionization detection function to achieve flameout protection, comply with industrial burner safety standards‌. Adaptive model: Main use scenario: Gulliver RG5S burner (single-segment fire, 160~309.5 kW). Compatibility verification: Adaptability testing is required in combination with the electrical interface and installation size of the burner model (such as RS5, BS4-M). Application scenarios: It is mainly used for ignition systems of gas/oil-fired industrial boilers, hot air generators and thermal oil furnaces. There is an interface difference with Weishaipt W-ZG series ignition transformers (such as W-ZG01/V), and a Riello special control system is required.

RIELLO ignition needle（3002584）

RIELLO ignition needle（3002584） Ignition needle (3002584) is a core ignition assembly dedicated to Riello burners, designed for gas/fuel burners to generate high-voltage electric sparks to ignite fuel-air gas mixture. Adaptive model: specially designed for RS series burners on the Liya Road, such as RS5~BS4-M and other models. ‌Electrical characteristics‌: Operating voltage is 220V, used in conjunction with the Riya Road ignition transformer (such as W-ZG01/V). ‌Physical characteristics‌: It is made of high-temperature resistant ceramic material, with a length of 600mm, suitable for high-temperature environments of industrial burners‌. Core functions: high-voltage discharge ignition and flame stability guarantee. Operating voltage: adapted to the 2×9kV output of the Riello ignition transformer, maximum withstand voltage of 500V AC. Main use scenarios: RLS series oil and gas dual-purpose burners (such as RLS 130/M MX), RS series gas burners (such as RS 50/M). Functional Features: ‌one.High pressure ignition‌ Electric sparks are generated through pulsed electronic ignition technology, with a delay of ≤5ms, and high-frequency ignition is supported (1000 times/hour)‌ Compared with the Viso W-ZG series ignition transformers, it must be matched with the Liya Road special control system‌. ‌two.Safety protection‌ Integrated ionization detection function, automatically cuts off gas supply when the flame is extinguished.

RIELLO ignition needle（3006707）

RIELLO ignition needle（3006707） Ignition needle is the core ignition assembly designed by Riello for gas/fuel burners, which is used to generate high-voltage electric sparks to ignite fuel-air gas mixture. Adaptive model: specially designed for RielloRS series burners, such as RS5~BS4-M and other models‌. ‌Electrical characteristics‌: The working voltage is 220V, and it is required to be equipped with Riello special ignition transformer‌. Core functions High-voltage discharge ignition: Combined with Riello ignition transformers (such as RWF40, 2×9kV output), high-frequency electric sparks are generated at the electrode tip (breakdown voltage is about 7~9kV), and quickly ignite the fuel mixture emitted by the burner. . Flame stability guarantee: Through precise electrode spacing design (standard 2.5mm, adjustable range 1.5~4mm), ensure the continuous stability of the arc and adapt to the rapid ignition requirements during the burner start-up stage. Protection Grade: IP65 dust-proof and waterproof design, which can work stably in humid, dusty or lightly splashed industrial environments. Operating voltage: adapted to the 2×9kV output of the Riello ignition transformer, maximum withstand voltage of 500V AC. Main use scenarios: RLS series oil and gas dual-purpose burners (such as RLS 130/M MX), RS series gas burners (such as RS 50/M).

Weishaupt ignition electrode WG5-40 (23220014217)

Weishaupt ignition electrode WG5-40 (23220014217) Ignition electrode WG5-40 is a core ignition assembly designed for Weishaupt WG series gas burners, mainly used to generate high-voltage electric sparks to ignite fuel-air mixed gases. Adaptive model: WG5-40 gas burner‌. ‌Electrical characteristics‌: The working voltage is 220V, and it is required to be equipped with Weishaupt original ignition transformer‌. Core functions High-voltage discharge ignition: Combined with Weishaupt ignition transformers (such as W-ZG 01/V type), high-frequency electric sparks are generated at the electrode tip (breakdown voltage is about 7~9kV), and quickly ignite the fuel mixture emitted by the burner. Flame stability guarantee: Through precise electrode spacing design (standard 2.5mm, adjustable range 1.5~4mm), ensure the continuous stability of the arc and adapt to the rapid ignition requirements during the burner start-up stage. Protection Grade: IP65 dust-proof and waterproof design, which can work stably in humid, dusty or lightly splashed industrial environments. Operating voltage: adapted to the 2×9kV output of Weishaupt ignition transformer, maximum withstand voltage of 500V AC. Ignition frequency: usually 50~60Hz, matching the timing requirements of the burner controller. Main use scenario: WG5-40 compact gas burner (power range 43-2,390 MBTU/h).

Riello ignition needle（3007987）

Riello ignition needle（3007987） Category: Burner accessories Ignition needle (3007987): is a core ignition component dedicated to the Italian Riello brand burners. This ignition needle is a key accessory for Riello BS 1 series burners and is suitable for gas or dual fuel burner systems. Its core role is to monitor the presence of flames through ionization effects to ensure the stability and safety of the combustion process. Operating voltage: Usually matches the standard ignition transformer output of Riello burners (such as 2×5kV to 2×8kV), with current range of 15-30mA. Adaptability: Designed specifically for Riello burners (such as RHE RS190/M and other models), compatible with Riello BS 1 burners and some models of gas valve groups, and must work in coordination with the burner control system. Core functions: flame detection and safety control, efficient ignition and combustion optimization, efficient ignition and combustion optimization.

Riello ignition needle（3014038）

Riello ignition needle（3014038） Category: Burner accessories Ignition needle (3014038) is a core ignition component dedicated to Riello medium and large industrial burners. Core functions‌: ‌one.High-intensity arc ignition‌ Receive high-voltage electricity above 15kV output from the ignition transformer, generate a strong arc at the discharge head, and directly ignite the gas/fuel mixture. Suitable for high-power burners such as ‌RLS series‌ (such as RLS 34~1300 models), meeting industrial-grade ignition needs. ‌two. High temperature resistance and corrosion resistance design‌ The discharge head is made of ‌nichrome alloy‌, which resists continuous high temperature in the combustion chamber (>1000℃) and acidic exhaust gas corrosion. The ceramic insulation layer is upgraded to ‌high-purity alumina‌ (Al₂O₃), with an insulation performance of 30% to avoid high-voltage leakage. three.combustion optimization and energy efficiency management Anti-interference ability: reduce electromagnetic interference through shielding wires or metal shielding layers, suitable for complex industrial environments (such as near inverters). Adaptive model: RLS series burners (such as RLS 44/M, RLS 100, RLS 400, etc.) must be used with the same series of flame sensing needles (such as 3014040).

RIELLO ignition electrode（3012428）

RIELLO ignition electrode（3012428） Category: Burner accessories Ignition electrodes are core components designed for specific burners and are mainly used for flame detection and ignition control. Functions: flame detection and safety control, combustion optimization and energy efficiency management, durability design. Fuel compatibility: Possibly compatible with gas + light oil dual fuel systems, which need to meet both gas ignition and flame detection requirements. The discharge head may be made of corrosion-resistant materials (such as nickel-plated stainless steel) to adapt to different fuel characteristics. ‌Adaptive model‌: RLS 700~1300 series industrial burners. Industrial-grade ignition components: adapted to Riello RLS series large burners (such as RLS 700/1000/1300), covering thermal power of 3.5~10MW. ‌Ultra-high voltage arc ignition‌: supports ‌20kV/15mA‌ discharge capacity, and can ignite combustion-resistant media such as heavy oil and high inert gas.

RIELLO ignition electrode F10 (3006074)

RIELLO ignition electrode F10 (3006074) Category: Burner accessories The ignition electrode is a core component specially designed for the F10 series burners, mainly used for flame detection and ignition control. Functions: flame detection and safety control, combustion optimization and energy efficiency management, durability design. ‌Adaptive Model‌: Riello ‌F10, F20, F30, MILLENNIUM 3/5‌ and other small burners. Core functions‌ ‌one.High voltage arc ignition‌ Receive the high-voltage output of the ignition transformer ‌8~12kV‌, and generates an arc at the tip of ‌3~5mm‌, ignites natural gas/liquefied gas. The spacing between the discharge heads is fixed (not adjustable), which simplifies installation but requires precise positioning. ‌two.Weather resistance design‌ Electrode needle: ‌430 stainless steel‌ matrix + copper core wire, withstand ‌800℃‌ and continuously high temperature. Insulation layer: single-layer talc porcelain (low-cost solution), insulation resistance >100MΩ (cold state).

RIELLO ignition needle

RIELLO ignition needle Category: Burner accessories The Riello ignition needle is the core component of the burner system, which is responsible for igniting fuel and monitoring the flame status in real time to ensure the safety and efficiency of the combustion process. Adapted fuels: natural gas (G20-G25), light oil (EN 590 diesel), LPG (customized). Adjustment ratio supports: two-stage fire (such as F10) or proportional adjustment (such as RS190, 1:8 modulation ratio). Operating voltage: 8-15kV (matched with RS series ignition transformer). Temperature resistance range: -20℃ to +800℃ (metal head), ceramic insulation layer temperature resistance ≥1000℃. Flame detection stage: Utilizes the ionization effect: the ionic current (15-30mA) in the flame is transmitted to the control box through the metal head. If the flame is extinguished, the system cuts off the fuel supply within 0.5 seconds. Ignition stage: Matching Riello standard ignition transformers (such as 230V-1x15kV), 8kV high voltage electric sparks are generated, which lasts 0.5-2 seconds to ignite the fuel mixture with a start-up delay of ≤3 seconds.

RIELLO ignition needle (74434610)

RIELLO ignition needle (74434610) Category: Burner accessories Ignition needle (74434610) is the core ignition component of the burner, mainly used for flame detection and ignition functions of RS34/RS44/RS70/RS100 and other models of burners‌. Fuel Compatibility: May support light oil (EN 590 diesel) or natural gas (G20-G25). Material: The electrode is made of high-temperature resistant alloy, and the insulated part is a ceramic structure. Installation method: Standard thread fixation, some models need to be matched with special brackets. Functional Features ‌High-voltage discharge ignition: generates electric sparks to ignite the gas through the tip of the electrode, and uses a ceramic insulation layer to ensure discharge stability‌. ‌Flame detection dual functions‌: Some models have integrated ion rod probes, which can detect flame status in real time and achieve flame out protection‌. ‌Multi-model adaptation‌: Suitable for Liya Road G3/G5/G10/G20LC and RS series burners, with strong versatility‌.

RIELLO ignition needle（3012426）

RIELLO ignition needle（3012426） Category: Burner accessories Ignition needle (3012426) is an ignition assembly designed for gas burners and is suitable for Riello RS series and other compatible models of combustion engines. Core functions ‌one.High voltage discharge ignition‌ It adopts a dual-electrode structure to generate stable electric sparks through ceramic insulators, and the ignition voltage is matched with the burner control system. ‌two. Flame detection integration‌ Some models (such as RS34/RS44) have built-in ion probes that can monitor the flame status in real time and realize the fire shutdown protection function‌. ‌three. Multi-model adaptability Compatible with mainstream models such as RS34, RS44, RS70, RS100, etc. Some batches may be expanded to the RS310 series‌. Material: The electrode is made of nickel-chromium alloy, the insulated part is high-temperature ceramic, and the temperature resistance is up to 1200℃. Installation method: Standard M12 threaded interface, required to be matched with a special fixing bracket. ‌Operating voltage‌: Usually matched with the burner ignition transformer. Typical applications: maintenance of commercial boiler ignition system, burner troubleshooting (ignition failure/flame detection abnormality), and transformation of industrial kiln gas equipment.