Cofi Ignition transformer TRE820P-4 1X8KV

Cofi Ignition transformer TRE820P-4 1X8KV COFI ignition transformer TRE820P-4 is a single pole high-pressure ignition transformer suitable for fuel and gas combustion engines and other equipment, with stable performance and rapid start-up. COFI ignition transformer TRE820P-4 is produced by Italian brand COFI, adopting advanced technology and stable product performance. It is compact and compact, easy to install and carry, and can be used to ignite the guiding ignition of industrial burners, suitable for occasions where interrupted ignition is required. Product parameters Primary voltage: 220V or 230V Frequency: 50Hz Secondary voltage: 8KV, peak value 11KV Ignition current: 20mA Protection level: IP54 Wiring method: three-wire system (brown connected to live wire, blue wire and neutral wire, two-color wire is grounded); four-wire system (black connected to live wire, blue wire is connected to neutral wire, brown wire is a high-voltage ground wire, single electrode is a feedback wire, two-color wire is grounded) Product Features Ignition function: High-pressure spark can be generated after power-on, which is used for automatic ignition operation of gas combustion equipment such as burners or burners, and can provide the equipment with sufficient energy to ignite the mixed gas of gas and air. High-frequency start: adopts high-frequency start technology, fast startup speed and short response time, can instantly ignite the equipment and improve work efficiency.

Cofi Ignition transformer TRK1-30CVD

Cofi Ignition transformer TRK1-30CVD COFI ignition transformer TRK1-30CVD is an electronic ignition transformer produced using electronic technology and has the characteristics of small size and light weight. The input voltage is 220-240V, the input current is 0.23A, the output voltage is 2×12kV, the output current is 30mA, and the frequency is 50/60Hz. This transformer is suitable for oil-fired gas burners, wall-mounted boilers, hot water high-pressure cleaning machines, mosquito repellent equipment, etc., and can meet the ignition needs of gas and fuel equipment with intermittent or continuous power requirements. Product features: High-efficiency ignition: It can convert the input low voltage into high voltage, generate high-voltage sparks, and provide sufficient energy for equipment such as combustion engines and industrial burners to ignite the gas and air mixture, achieving reliable ignition. Stable operation: Using vacuum impregnation process and specially designed epoxy resin, it ensures high insulation and can resist the impact of environmental factors on its performance to a certain extent, ensure stable operation under different working conditions, and reduce ignition failure caused by external interference. Adapt to multiple scenarios: TRK series is a standard transformer. Through different power settings, it can meet the market's demand for electronic equipment designed with different access and output ports. It is suitable for a variety of gas and fuel equipment and has a wide range of application scenarios.

Cofi Ignition transformer TRK2-30PVD

Cofi Ignition transformer TRK2-30PVD Cofi ignition transformer TRK2-30PVD is a single pole high-voltage ignition transformer suitable for fuel and gas combustion engines and other equipment. It is produced using electronic technology and has good electrical performance and environmental adaptability. The input voltage is 220-240V, the current is 0.3A, the output voltage is 1×15kV, the frequency is 50/60Hz, and the temporary loading rate is 33% (3min). The product is potted with high-quality resin adhesive, which can operate normally and safely under environmental conditions of -20℃-+60℃, and has the ability to resist electromagnetic interference, and complies with European industrial standard EN61588/2/3 and other relevant standards. Product functions: reliable ignition, adapt to a variety of equipment, stable operation Keywords:Cofi Ignition transformer TRK2-30PVD

FIDA 8Kv 30mA ignition transformer

FIDA 8Kv 30mA ignition transformer The input voltage is 230V, the input current is 1.4A, the output voltage is 1×8KV, the output current is 30mA, the frequency is 50Hz, and the load rate is 25%. The exterior dimension is about 110x86x67mm, and it can be used in boilers, hot air furnaces, smelting furnaces, central air conditioners, petrochemicals, kitchen equipment and other thermal energy industries, and is suitable for burners, burners and other equipment. Main functions: voltage conversion, impedance conversion, electrical isolation, stable output.

FIDA 2X5Kv 30mA ignition transformer

FIDA 2X5Kv 30mA ignition transformer The input voltage is 230V, the input current is 1.2A, the frequency is 50Hz, the output voltage is 2X5KV, the output current is 30mA, and the temporary loading rate is 15%. This transformer is a coil ignition transformer with an external dimension of about 101010cm. It is mainly used for burner ignition. It can adapt to a variety of fuels and is widely used in thermal energy industries such as boilers, hot air furnaces, central air conditioners, etc. Main functions: Voltage conversion: converts a low voltage of 230V into 2 sets of 5KV high voltages to generate high voltage electric sparks, providing sufficient energy for burners and other equipment to ignite the mixed gas of gas and air, and achieve reliable ignition. Impedance conversion: It can match the impedance of the ignition system of the burner, so that the ignition energy can be transmitted efficiently, improve the ignition efficiency, and ensure the stable operation of the ignition system. Electrical isolation: electrically isolate the high-voltage side of the ignition system from the low-voltage side to ensure the safety of operators and equipment, while reducing interference between circuits. Stable output: It can cope with power supply voltage fluctuations to a certain extent and keep the output voltage relatively stable to ensure the reliability and consistency of ignition.

FIDA 1X8KV 30mA ignition transformer

FIDA 1X8KV 30mA ignition transformer FIDA Ignition Transformer 1X8KV (8-30PM) is a coil ignition transformer. The input voltage is 230V, current is 1.4A, frequency is 50Hz, output voltage is 1X8KV, current is 30mA, and temporary loading rate is 25%. Main functions: Voltage conversion: Raise the low voltage of 230V to a high voltage of 8KV to generate high voltage of high voltage, providing sufficient energy for burners and other equipment to ignite the mixed gas of gas and air, and achieve reliable ignition. It is often used in the ignition system of gas burners. Impedance conversion: It can match the impedance of the ignition system of the burner, so that the ignition energy can be transmitted efficiently, improve the ignition efficiency, and ensure the stable operation of the ignition system. Electrical isolation: electrically isolate the high-voltage side of the ignition system from the low-voltage side to ensure the safety of operators and equipment, while reducing interference between circuits. Stable output: It can cope with power supply voltage fluctuations to a certain extent and keep the output voltage relatively stable to ensure the reliability and consistency of ignition.

FIDA 26Kv 30mA ignition transformer

FIDA 26Kv 30mA ignition transformer Feida Ignition Transformer 26-30 100% PM (26Kv) is a device used for burner ignition. It has different types such as single-stage and double-stage, and has functions such as voltage conversion and electrical isolation. Model specifications: Common models such as MOD26/30 PM are capacitive ignition transformers. Input parameters: The input voltage is usually 230V or 240V, the frequency is 50/60Hz, and the input current is about 0.15A. Output parameters: The output voltage is 26KV, the output current is 30mA, and the temporary load rate is 100%. Main functions: Generate high-voltage spark: convert the input low voltage into a high voltage of 26KV to generate high-voltage electric spark, providing sufficient energy for burners and other equipment to ignite gas and air, which can be used for ignition of equipment such as boilers and hot air furnaces. Impedance matching: It can match the impedance of the ignition system of the burner, so that the ignition energy can be transmitted efficiently, improve the ignition efficiency, and ensure the stable operation of the ignition system. Electrical isolation: electrically isolate the high-voltage side of the ignition system from the low-voltage side to ensure the safety of operators and equipment, while reducing interference between circuits. Stable output: It can cope with power supply voltage fluctuations to a certain extent and keep the output voltage relatively stable to ensure the reliability and consistency of ignition.

SUNTEC AJ6AC 1000-4Z oil pumps

SUNTEC AJ6AC 1000-4Z oil pumps Working Principle: It conveys fuel through the rotation of an internal pair of gears and is an electric gear pump. Applicable Fuels: It can be used for light oil, medium oil and other liquid fuels. Operation Mode: It supports single-pipe (only the fuel inlet pipe) or double-pipe (with both the fuel inlet pipe and the return pipe) operation. Filtering Function: It is equipped with an internal filter ring with a filtration accuracy of 150μm, which can effectively filter impurities in the fuel. Working Parameters: The working viscosity is 2.8-75mm²/s (cSt), the fuel temperature inside the oil pump is 0-60℃, the inlet pressure is 2 bars, the return pressure is 2 bars, the inlet negative pressure is 0.45 bars vacuum, the speed is 3600 rpm, and the torque (at 45 rpm) is 0.30 N.m. Main Functions: Provide fuel pressure: It supplies the required pressure for the burner, ensuring that the fuel can be sprayed at an appropriate pressure, guaranteeing the normal delivery and combustion effect of the fuel, and is suitable for various oil burners and boilers and other equipment. Adjust the fuel outlet pressure: The outlet pressure can be adjusted according to actual working requirements to adapt to the working requirements and operating conditions of different burners. Prevent oil-gas separation: It has a certain negative pressure tolerance at the inlet, which can prevent oil-gas separation in the pump, ensuring the stability of the oil pump operation and the continuity of fuel delivery. Categories：Burner Accessories SUNTEC

SUNTEC AJ6CC 1000-4Y oil pumps

SUNTEC AJ6CC 1000-4Y oil pumps Suntec oil pump AJ6CC 1000-4Y is a high-speed and high-pressure gear pump suitable for fuel burners. Dimensions and weight: The dimensions are about 120*90mm and the weight is about 2KG. Suitable fuel: It can be used for liquid fuels such as light oil and medium oil, or kerosene or diesel. Structural features: There is a pair of gear pairs rotating inside, and pressure is generated by the rotation of the gears. The pump body is closed and combined with a pressure regulator and hydraulic valve, with a built-in filter ring, and the filtering accuracy is 170μm. Pressure and flow rate: pressure bearing 6BAR, pressure range is 7-14/10-20bars, flow rate is 25-130l/h under 2580rpm, 5sCT, and 10bars. Operation mode: Supports single-controlled (only oil inlet pipe) or double-controlled (with oil inlet pipe and return pipe). Main functions: Provide fuel pressure: Provides the required pressure to the burner so that the fuel can be injected at the appropriate pressure to ensure normal fuel delivery and combustion effect. It is often used in diesel burners of brands such as Leya Road. Adjust the oil outlet pressure: The oil outlet pressure is adjustable, and the fuel output pressure can be adjusted according to actual working needs to adapt to the working requirements and changes in different burners. Filtering fuel impurities: The built-in filter ring can filter impurities in fuel, reduce the wear and blockage of impurities on combustion system components, ensure the stable operation of the combustion system, and extend the service life of related equipment. Adapt to different oil supply systems: the single-tube or double-tube oil supply method can be changed by yourself, which can meet the design requirements of different fuel systems and is flexible in application. Category: Suntec Fuel Pump Burner Pump

SUNTEC AT355A-9508-4P oil pumps

SUNTEC AT355A-9508-4P oil pumps Working principle: It belongs to a gear pump, which transports fuel through the rotation of the internal gear pair. Type features: The AT series is a two-stage turbulent oil pump with two solenoid valves, with two sets of pressure for adjustment, one oil injection outlet and cutting function. Suitable fuel: Suitable for heating liquid fuels such as kerosene, light oil, heavy oil, bio-oil or mixed rapeseed oil. Pipe type: "P" in "4P" means double-tube type, which can support dual-tube operation, that is, there is an oil inlet pipe and a return pipe. Main functions: Precise oil supply: It can provide a stable fuel supply according to the working needs of the burner, ensure the continuity and stability of the combustion process, and is suitable for all types of petroleum burners and boilers and other equipment. Two-stage fire control: It has two-stage fire function, and can be controlled through two solenoid valves to realize two sets of pressure adjustment. It can switch different oil supply pressures and flows according to actual load requirements, meet different combustion power requirements, and improve energy utilization efficiency. Pressure regulation and cutting: The fuel output pressure can be adjusted to adapt to the working requirements and changes in different burners, and has a cutting function, which can cut off the fuel supply when necessary to ensure the safety of the system. Prevent oil and gas separation: It can withstand a certain negative pressure of inlet, prevent oil and gas separation in the pump, and ensure the stability of the oil pump's working and the continuity of fuel delivery.

Danfoss Ignition transformer EBI4 CM

Danfoss Ignition transformer EBI4 CM EBI4 CM:It is an electronic ignition device suitable for small and medium-sized fuel or gas burners, with high efficiency, environmental protection, and convenient installation. Brand and origin: Danfoss, originated in Denmark. Input parameters: The input voltage is 230VAC, the input current is about 0.25A, the frequency is 50-60Hz, and the power is 60VA. Output parameters: The output voltage is 2*7.5KV, and the output current is 30mA. Structural features: small size, light weight, high frequency operation technology, suitable for installation in modern compact burners. The primary side is a plug connection and the secondary side is a bushing connection for easy installation and maintenance. Certification standards: Comply with RoHS and WEEE Directives, electromagnetic compatibility complies with EN 55014-1 and EN 55014-2. Main functions Efficient ignition: The ability to convert 80% of the input energy into high voltage ensures rapid ignition of the oil burner for instantaneous ignition and clean combustion. Safe and reliable: It has strong tolerance to thermal overload, which can reduce failures caused by overload and other problems, and ensure stable operation of the equipment. At the same time, it complies with relevant electromagnetic compatibility standards, reduces electromagnetic interference and makes operation more reliable. Energy-saving and environmentally friendly: It can make the combustion engine ignite a mixture of oil and air safely and quickly, making the combustion engine start more environmentally friendly. Since less soot ash is accumulated, it can reduce fuel consumption by 4-10%, effectively save energy and reduce pollutant emissions. Flexible ignition mode: It is a bipolar version with secondary center grounding, suitable for intermittent ignition between the poles, and can be used in gas and fuel combustion engines to meet the ignition needs of different types of burners.

Danfoss Pressure Switch KP36

Danfoss Pressure Switch KP36 Pressure Switch KP36 ：It is a pressure control device suitable for industrial applications, mainly used in refrigeration and air conditioning systems and other fields. Adjustment range: Pressure adjustment range is 2 - 14bar. Maximum working pressure: The maximum working pressure is 17bar and the maximum test pressure is 22bar. Case protection level: It can be configured with casings with protection levels of IP30 and IP44, which can protect against dust and prevent foreign objects from entering to a certain extent. Functions: Pressure control, motor control, fast rebound function.

Danfoss oil mouth 2.25 60° solid

Danfoss oil mouth 2.25 60° solid oil mouth 2.25 60° solid：It is a fuel injector for burners, with a specific flow rate and injection angle, mainly used for atomized injection of fuel. Appearance dimensions: The dimensions are about 15mm×15mm×48mm, and the thread diameter is 10mm. The filter type is filter type and the specification is under 100psi pressure. Function: Accurate fuel injection, improve combustion efficiency, applicable to multiple fuels, and stabilize combustion process.

Danfoss ignition transformer EBI4 1P

Danfoss ignition transformer EBI4 1P Danfoss ignition transformer EBI4 1P：It is an ignition device suitable for small and medium-sized fuel and gas combustion engines. Input parameters: The input voltage is 230VAC, the input current is 0.25A, the frequency is 50-60Hz, and the power is 60VA. Output parameters: output voltage 12KV, output current 40mA, short circuit current frequency 20kHz. Functions: efficient ignition, energy saving and consumption reduction, stable operation.

Danfoss ignition transformer EBI4 M

Danfoss ignition transformer EBI4 M Danfoss ignition transformer EBI4 M：It is an ignition device suitable for small and medium-sized fuel and gas combustion engines. Input parameters: The input voltage is 230V, current is 0.25A, frequency is 50/60Hz, power is 60VA. Output parameters: The output is 2×7.5kV, current is 40mA. Functions: efficient ignition, energy saving and consumption reduction, wide application, convenient installation, safe and environmentally friendly.