RIELLO ignition needle（3012426）

RIELLO ignition needle（3012426） Category: Burner accessories Ignition needle (3012426) is an ignition assembly designed for gas burners and is suitable for Riello RS series and other compatible models of combustion engines. Core functions ‌one.High voltage discharge ignition‌ It adopts a dual-electrode structure to generate stable electric sparks through ceramic insulators, and the ignition voltage is matched with the burner control system. ‌two. Flame detection integration‌ Some models (such as RS34/RS44) have built-in ion probes that can monitor the flame status in real time and realize the fire shutdown protection function‌. ‌three. Multi-model adaptability Compatible with mainstream models such as RS34, RS44, RS70, RS100, etc. Some batches may be expanded to the RS310 series‌. Material: The electrode is made of nickel-chromium alloy, the insulated part is high-temperature ceramic, and the temperature resistance is up to 1200℃. Installation method: Standard M12 threaded interface, required to be matched with a special fixing bracket. ‌Operating voltage‌: Usually matched with the burner ignition transformer. Typical applications: maintenance of commercial boiler ignition system, burner troubleshooting (ignition failure/flame detection abnormality), and transformation of industrial kiln gas equipment.

RIELLO ignition needle lengthening adapter

RIELLO ignition needle lengthening adapter Category: Burner accessories Ignition need lengthening adapter is a special accessory for extending the installation distance of standard ignition needles. It mainly solves the problem of insufficient distance between the ignition electrode and the burner body under special operating conditions. Functional Features ‌one.Installation spacing adjustment‌ Through extended design (common 30-50mm specifications), adapts to the non-standard installation requirements of RS34/RS44 and other models of burners‌. ‌two.Insulation protection‌ High-temperature ceramic material is used to ensure that the extended part maintains electrical insulation in a high-temperature flame. ‌three.Interface compatibility‌ Standard M12 threaded interface can be directly connected to ignition needles such as 3012426, 74434610. Material: The main body is a stainless steel/ceramic composite structure, with a temperature resistance of up to 800℃. Applicable models: Compatible with RS series and G10/G20 and other Riello burners‌. Installation method: It must be used with the original ignition needle holder. Typical application scenarios: modify the installation location of the burner ignition system and solve the problem of insufficient ignition distance caused by the space limitations of the combustion chamber.

RIELLO RS100 ignition needle and induction rod

RIELLO RS100 ignition needle and induction rod Category: Burner accessories The technical documents and industry practice of the Riello RS100 burner, its ignition needle and induction rod (flame detector) are the core components to ensure the safe and stable operation of the combustion system. Fuel type: Supports light oil (EN 590 diesel) and natural gas (G20-G25), and the head material is usually nickel-plated stainless steel to adapt to high temperature environments. Burner series: adapted to RS70, RS100, RS130 and other models. Ignition needle function and characteristics: ‌one.High voltage discharge ignition‌ Adopt ceramic insulated electrode structure, generates electric sparks through high-voltage pulse (8kV) to ignite gas, and is suitable for RS100 two-stage fire burner control system‌ ‌two. Multi-model compatibility‌ It is universal in specifications of ignition needles such as RS34/RS44/RS70. Induction rod (ion probe) function: ‌Flame Monitoring‌ Real-time detection of flame ionization current (≥5μA), realizes the flame out protection function, and is linked to the control box. Ignition needle working voltage: 8-15kV (matched with RS series ignition transformer). Temperature resistance range: -20℃ to +800℃ (electrode head), ceramic insulation layer temperature resistance ≥1000℃. Insulation resistance: ≥100MΩ (500V DC test), preventing electrical short circuit during high-voltage discharge.

RIELLO ignition rod (3006708)

RIELLO ignition rod (3006708) Ignition rod (3006708) is an ignition device designed for burners. Application field‌: Suitable for Riello series burners, mainly used for ignition systems for gas/fuel combustion equipment‌. Structural features: It adopts a bipolar ignition electrode design, including ceramic insulator and metal electrode, ensuring high-voltage discharge stability. ‌Compatible Model‌: Adaptable to Riello standard burner models such as G10‌. Ignition voltage: Typical value 15-20kV (need to be used with ignition transformer). Material composition: ceramic insulator + nickel-chromium alloy electrode. ‌Working temperature‌: -20℃～+800℃‌. Functional Features ‌Reliable Ignition‌: Ignite the gas/fuel mixture by high-voltage arc‌. ‌Carbon Deposition‌: Special electrode materials can reduce the accumulation of combustion residue‌. Long life: Industrial-grade design, with an average service life of more than 5,000 times‌. Typical applications: industrial boiler ignition system, gas hot air furnace burner, food processing equipment combustion device.

RIELLO RL series P200 solenoid valve

RIELLO RL series P200 solenoid valve Model: RL series P200 solenoid valve RL Series P200 Solenoid Valve is a safe solenoid shutoff valve designed for industrial burner systems. The core function is to achieve rapid on-off control of gas or fuel through electromagnetic drive, and integrate multiple safety protection mechanisms to ensure system reliability. Series‌: Riello RL series, high-performance solenoid valves specially designed for gas combustion systems‌. Applicable media: combustible gases such as natural gas, LPG (gas), liquefied gas, etc. The maximum working pressure is: 500 mbar. Design features: It adopts a combination structure of electromagnetic starter and butterfly valve, which combines fast cutting and sealing performance. Electrical characteristics: Adopt 230V AC (50/60Hz) with protection rating IP54 (with resistance to dust and water spray), and can operate stably at ambient temperatures from -20°C to +60°C. The electrical connection is achieved through terminals for easy integration into an automated control system. Core functions: safe cutoff control, precise flow regulation, and high-reliability operation.

RIELLO GS20-M capacitance（20087035）

RIELLO GS20-M capacitance（20087035） Product code:20087035 Category: Burner accessories GS20-M capacity is an energy storage electronic component specially designed for industrial combustion systems, mainly used to assist motor start-up and stabilize circuit voltage. Model: GS20-M (20087035) ‌Type‌: Riello burner special capacitor for ignition or signal processing in gas control systems. Applicable scenarios: circuit protection or energy storage of industrial combustion equipment (such as boilers, heat treatment furnaces). Core functions‌ ‌Circuit Protection‌: Stabilize voltage fluctuations and prevent ignition system from being damaged by transient current‌. ‌Signal Filtering‌: Filter out high-frequency noise to ensure the accuracy of the control signal. Application Cases ‌burner ignition circuit‌: Used in conjunction with solenoid valves and ignition electrodes to improve ignition reliability‌.

RIELLO capacitance (3003767）

RIELLO capacitance (3003767） Capacitance is an electronic component designed for industrial burners and related equipment, mainly used for auxiliary motor start-up and circuit stability optimization. Type‌: Special capacitor for RIELLO burner, used for circuit protection or signal processing in gas control systems‌. Applicable scenarios: The circuit stability or energy storage of industrial combustion equipment (such as boilers, heat treatment furnaces). Core functions: motor start-up assistance, voltage stability and filtering, circuit protection mechanism. Application Cases ‌burner ignition circuit‌: Used in conjunction with solenoid valves and ignition electrodes to improve ignition reliability‌. Application scenarios Industrial burners: Motor start circuit for burners of RL series, RS/E ULX series and other models, adapted to fuel types such as natural gas, light oil, and supports the stable operation of boilers, hot air furnaces and other equipment. Auxiliary circuit: In the burner control box, it acts as a power filter element to ensure signal accuracy of the microprocessor and sensor.

RIELLO Motor G20 24V use（3003534）

RIELLO Motor G20 24V use（3003534） Motor G20 is a DC servo motor specially designed for burner control systems. It is mainly used to drive damper baffles or gas butterfly valves to achieve precise adjustment of the combustion process. The motor belongs to the G20 series and is designed for RIELLO burners (such as 40G20LC, GS20 and other models) and is adapted to a 24V DC power supply. Its core function is to optimize combustion efficiency and reduce emissions by precisely controlling the opening of the damper or gas valve. Voltage: 24V DC. Functional Features: ‌one.Servo control‌ 24V DC power supply, the damper opening is controlled through pulse signals or analog quantities to achieve accurate adjustment of the air/fuel ratio‌ two.combustion regulation control Shaker drive: In two-stage fire or proportional adjustment burners, the motor adjusts the damper opening according to load requirements to ensure the best air/gas ratio (such as the damper opening is 20-30° during low fire, and 90° fully open at high fire). three.Safety and reliability Overheating protection: Built-in temperature sensor, which automatically cuts off the power supply when the motor temperature exceeds 80°C to prevent burning. Application scenarios one. Burner type Fuel burner: such as RIELLO 40G20LC, used to drive dampers to regulate air volume and optimize light oil (diesel) combustion efficiency. Gas burners: such as GS20 series, controls the opening of gas valves and is suitable for fuels such as natural gas, LPG. Two. Typical Application Industrial Boiler: In steam boilers or hot water boilers, the combustion parameters are dynamically adjusted according to the load to reduce NOx emissions (≤80 mg/m³). Categories：Burner Accessories RIELLO

RIELLO electromagnetic jammer (3012155)

RIELLO electromagnetic jammer (3012155) Electromagnetic jammer is an electromagnetic compatible (EMC) component designed for burner control systems. It is mainly used to suppress high-frequency electromagnetic interference (EMI) and ensure the stability and reliability of burner control signals. Purpose: Used to suppress electromagnetic interference (EMI) in the burner control system, ensure stable signal transmission, and prevent malfunction or failure. Applicable equipment: mainly equipped with Riello burner control systems, such as RS5D, GS20, BG300 and other series. Functional Features oen.Electromagnetic interference suppression: Reduce electromagnetic noise generated by ignition transformers, relays, motors and other equipment, prevent signal interference from causing malfunctioning or shutdown of the burner. It is suitable for 24V DC control circuits to protect sensitive components such as servo motors and ion probes. Compatibility: Adaptable to Riello RS5D, GS20, BG300 and other burner control systems. three.Easy to install: Standard terminals are used, which can be directly connected in series in the control circuit. Maximum continuous voltage: 250V AC.50/60HZ. Application scenarios: industrial burners (boilers, dryers, hot air furnaces, etc.), gas/fuel burner control systems, industrial environments with severe electromagnetic interference. Categories：Burner Accessories RIELLO

RIELLO Motor（3005820）

RIELLO Motor（3005820） Motor is an AC asynchronous motor designed specifically for burner systems. It is mainly used to drive the air impeller and oil pump of the burner, and is suitable for Riello 40G series burners (such as G20, G20LC, G20S). Voltage/Power: 230V AC ±10%, 50Hz, maximum power 150W, start current ≤3A, running current ≤1.2A. Speed: no-load speed is 2750 RPM, and the output speed is about 1400 RPM after deceleration through the burner gearbox, matching the operating requirements of the fan and oil pump. Purpose: Mainly used for damper adjustment or servo control of gas/fuel burners to ensure the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS5D, GS20, BG300‌ and other burner series. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signals or analog quantity to achieve accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as BG300-2) to smoothly switch power gears. two.Safety protection‌ Built-in overload protection, triggering LED alarms during failure (such as yellow flashing prompts the protection device to fail). Comply with ‌EN676 standard‌, adapted to PELV safe voltage (18-30V DC). three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive. Typical Application ‌Shield drive for gas burners‌ (such as Riello GS20, RS5D series). ‌combustion control system for industrial boilers and drying equipment. Categories：Burner Accessories RIELLO

RIELLO RS190 Motor (20050960)

RIELLO RS190 Motor (20050960) RS190 Motor‌: It is a special motor for the Riello RS190 series. Purpose: It is mainly used for servo control of gas/fuel burners, adjusting the damper opening to achieve the precise ratio of air to fuel. ‌Applicable equipment‌: Adapt to ‌Riello RS190 series burners‌ (such as RS190-2, RS190-3, etc.). Voltage/current: 24V DC, rated current ≤ 30mA (closed circuit), instantaneous inrush current ≤ 10A (<2s)‌. ‌Interface type‌: 4-pin M12 socket, supports PNP signal input/output‌. Protection level: IP55 (dust-proof and waterproof), suitable for industrial environments. Functional Features: one.Servo control‌ Powered by 24V DC, the damper opening is controlled by pulse signal or analog quantity to ensure accurate regulation of combustion power. Supports ‌dual-segment fire burners‌ (such as RS190-2), which can smoothly switch power gears‌. two.Safety protection‌ Built-in overload protection, triggering LED alarm when a fault is caused (such as yellow flashing to indicate a faulty protection device)‌ Adaptable to PELV safe voltage (18-30V DC)‌ three.Compatibility‌ Can be used with ‌Siemens LFL1.133 controller‌ or Riello dedicated drive‌. Typical Application ‌Shake drive for gas burners‌ (such as the Riello RS190 series). ‌combustion control system for industrial boilers and drying equipment‌. Categories：Burner Accessories RIELLO Keywords: RS190

RIELLO Motor MS3 100L 2-2 B5

RIELLO Motor MS3 100L 2-2 B5 Product model: MS3 100L 2-2 B5 Product name: Riello three-phase asynchronous burner special motor MS3 100L 2 - 2 B5 Rated voltage: 380V three-phase AC Rated frequency: 50Hz Material: aluminum alloy die-casting Insulation class: F class Protection level: IP55 Operating temperature range: 20℃ - 40℃ Applicable objects: Riello series special burners Fuel: natural gas, liquefied petroleum gas, diesel and other conventional combustion fuels. Type: From the power type, it belongs to a three-phase asynchronous motor; from the adaptation scenario, it belongs to a burner-specific matching motor; from the installation method, it belongs to a B5 flange motor; from the shell material, it belongs to an aluminum alloy shell motor; from the operating characteristics, it belongs to an industrial-grade continuous operation motor. Keywords: Special motor for Riello burner Condition: Brand new Function: The core function is to provide stable and continuous driving force for the Riello burner fan to ensure quantitative and uniform transportation of air during the combustion process; through stable air supply, the fuel and air are fully mixed to improve combustion efficiency and reduce energy waste; it is linked with the burner control system to achieve synchronous start and stop, reducing the risk of failure of the combustion system due to power fluctuations, and ensuring the stability and safety of the combustion process. Applicable industries: Focus on fields related to heat source supply for burners, and are widely used in industrial furnaces, food processing, etc. freight：Please consult for details Core features 1. The aluminum alloy machine base is both lightweight and has excellent heat dissipation properties. It can quickly dissipate the heat generated during operation, avoid failures under high temperature conditions, and extend the service life. The 2.2-pole design has large starting torque and high speed, which can quickly drive the fan to reach the rated speed, adapt to the need for rapid start and stop of the burner, and reduce the impact of startup delay on combustion efficiency. 3. The protection level usually reaches IP55, has good dust-proof and water-spray-proof capabilities, and can adapt to the dusty and humid complex environment of industrial sites. 4. It has low noise and vibration during operation, which complies with the low-noise operation standards of industrial equipment and reduces noise interference to the working environment. This motor meets the working conditions of high-frequency start and stop of the burner and continuous operation. It can accurately match the power interface of the burner fan. It is the core power component to ensure the stable operation of the burner air supply system and is suitable for long-term continuous operation in industrial scenarios. Categories：Burner Accessories RIELLO