Riello Oil and gas dual-purpose burner RLS68Mx

Riello Oil and gas dual-purpose burner RLS68Mx RIELLO RLS68/M MX Burner is a dual-purpose oil and gas combustion device designed for hot water boilers, steam boilers and thermal oil furnaces, supporting natural gas or light oil as fuel. Output range: 200-860 kW (light oil mode). ‌Fuel consumption/gas consumption‌: 17-73 kg/h (light oil) or 0.01 m³/h (natural gas)‌. ‌Supply pressure‌: 7 kPa ‌. Running mode: Smooth switching between two sections of fire: drive the fuel valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: After installing a PID ratio adjuster (such as RWF40), the adjustment ratio can reach 1:4, adapting to dynamic load requirements. Fuel supply: Dual fuel compatible design, can quickly switch between natural gas and light oil, adapt to different energy supply conditions. Power supply and protection: three-phase power supply (3/400V/50Hz), electrical protection level IP44, suitable for conventional industrial environments. Functional Features ‌Dual fuel adaptation‌: Oil and gas switching can be achieved by changing the fuel type to meet different energy needs. ‌Low nitrogen emission design‌: adopt low nitrogen combustion technology. ‌High-efficiency thermal energy conversion‌: Dual-section fire control mode improves combustion efficiency and reduces fuel consumption. ‌ ‌Silent Design‌: Optimize the application of air intake circuits and silence materials, and the operating noise is lower than industry standards. ‌ ‌Flexible maintenance structure‌: Modular design is easy to install and maintain, and has strong accessories compatibility. Applicable scenarios Suitable for industrial hot water supply, steam production and heating of thermal energy equipment, it is especially suitable for industrial scenarios where efficient energy utilization is required. Categories:Branded burners Riello

Riello gas burner RS68-E BLU

Riello gas burner RS68-E BLU RS68-E BLU is a low-nitrogen gas burner of the RIELLO brand, designed for boiler low-nitrogen transformation and industrial heating equipment. Output power: 150-860 kW (natural gas G20), covering medium and low load demand in the industrial field. Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire;. Proportional adjustment upgrade: After installing a PID ratio adjuster (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:4, adapting to dynamic load requirements. Fuel type: gaseous fuels such as natural gas (G20), suitable for gas pressure range of 4-50 mbar (integrated valve group) or 20-40 mbar (combined valve group), with a maximum gas pressure of 500 mbar. Power supply and protection: three-phase power supply (3/400V/50Hz), electrical protection level IP44, suitable for conventional industrial environments. Functions: electronic proportional adjustment, low nitrogen design, fully automated control, safety protection mechanism, low noise and environmental protection performance. Two-stage fire precise control: the servo motor drives the damper and gas valve, achieving seamless switching between high and low fires and fast response speed. Categories:Branded burners Riello

Riello gas burner RS34 MZ

Riello gas burner RS34 MZ RS34 MZ is a high-performance gas burner designed by RIELLO for small and medium-sized industrial thermal energy equipment. It belongs to the RS series and is suitable for hot water boilers, steam boilers, thermal oil furnaces and hot air furnaces. Power supply and protection: Single-phase power supply (1/230V/50Hz), electrical protection level IP40, suitable for conventional industrial environments. Fuel type: Natural gas (G20), suitable for gas pressure range of 4-33 mbar (integrated valve group) or 20-40 mbar (combined valve group), maximum gas pressure can reach 500 mbar. ‌Fuel Type‌: Supports natural gas (G20/G25) and liquefied petroleum gas‌. ‌Control method‌: Smooth two-section fire or mechanical proportional adjustment (MZ model). Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: optional PID ratio regulator (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:6 to meet dynamic load requirements. Core functions: combustion regulation and energy efficiency optimization, safety protection mechanism, intelligent and convenient maintenance, low noise and environmental protection performance. Scope of application: It is suitable for hot water, superheated water boilers, steam boilers and thermal oil furnaces, and is compatible with a variety of industrial scenarios. Categories:Branded burners Riello

Riello gas burner RS44 MZ

Riello gas burner RS44 MZ RS44 MZ is an industrial-grade gas burner of the RIELLO brand. It belongs to the RS series and is designed for boilers and industrial heating equipment. Output power: 80/200÷ 550 kW (natural gas G20), adapting to medium and high load requirements of small and medium-sized industrial equipment. Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: optional PID ratio regulator (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:6 to meet dynamic load requirements. Fuel type: Natural gas (G20), suitable for gas pressure range of 4-33 mbar (integrated valve group) or 20-40 mbar (combined valve group), maximum gas pressure can reach 500 mbar. Power supply and protection: Single-phase power supply (1/230V/50Hz), electrical protection level IP40, suitable for conventional industrial environments. Functional Features ‌High adaptability Suitable for half-ton boilers and various thermal energy equipment, adapting to different scenario needs. ‌Safety Guarantee‌ Equipped with safety components such as flame detectors, damper actuators, etc., to ensure the combustion process is stable and controllable. ‌Control Performance‌ It adopts segmented combustion technology, supports ignition detection, oxygen content monitoring and other functions to improve combustion efficiency and safety. Categories:Branded burners Riello

Riello gas burner RS100

Riello gas burner RS100 RS100 is an industrial-grade gas burner of the RIELLO brand. It is specially designed for boilers and industrial heating equipment. It has low nitrogen environmental protection, energy-saving and efficient characteristics. Output power: Covering 232-1163 kW (natural gas G20), adapting to medium and high load requirements of small and medium-sized industrial equipment. Running mode: Smooth two-section fire: drive the gas butterfly valve and damper through the servo motor to achieve automatic switching between high and low fire. Proportional adjustment upgrade: optional PID ratio regulator (such as RWF40) and temperature/pressure probe, the adjustment ratio can reach 1:4 to meet dynamic load requirements. Fuel type: Natural gas (G20), suitable for gas pressure range of 4-33 mbar (integrated valve group) or 20-40 mbar (combined valve group), maximum gas pressure can reach 500 mbar. Power supply and protection: three-phase power supply (3/400V/50Hz), electrical protection level IP40, suitable for conventional industrial environments. Fuel type: Natural gas or liquefied petroleum gas (LPG) ‌Control method‌: Second-stage fire regulation‌. Core functions ‌Low nitrogen environmental protection‌: Use smooth double-section fire technology, nitrogen oxide emissions are less than 30 mg/cubic meter, and meet environmental protection standards. ‌Efficiency and Energy Saving‌: The microelectronic control system monitors combustion status in real time, optimizes the gas and air mixing ratio, and ensures combustion efficiency of more than 98%. ‌ ‌Flexible adaptation‌: Suitable for various working conditions such as hot water boilers, thermal oil furnaces, etc., the output range covers 70 to 2290 kilowatts, and supports rapid adjustment. ‌Intelligent Diagnosis‌: Equipped with a fault self-test function, it can display the operating status and cause of the fault in real time through the control box. Application scenarios: Industrial hot water/steam boilers, thermal oil furnaces, etc. Categories:Branded burners Riello

Riello gas burner RS190

Riello gas burner RS190 RS190 is a smooth transition two-stage fire gas burner specially designed for commercial and industrial fields, suitable for hot water/superheated water boilers, steam boilers, hot air generators and thermal oil furnaces. Power range: 470-2290 kW, covering medium and large heating needs. Fuel type: supports natural gas and liquefied gas, and some models are dual-purpose oil and gas designs. ‌Low nitrogen emissions‌: Low nitrogen combustion technology is adopted, nitrogen oxide emissions are extremely low, and meet environmental protection standards‌. Total power: 5.5 kW, motor power: 4.5 kW, start current: 126-72.8 A. Functional Features Adjustment method: Smooth transition of two sections of fire control, supports precise firepower adjustment, and improves energy efficiency. ‌Intelligent Control‌: Equipped with a microelectronic control box, it can monitor operating status and diagnose faults in real time. ‌Compact Design‌: Optimize the structure to reduce volume, facilitate installation and maintenance, compatible with a variety of optional accessories expansion functions‌. Application scenarios: It is widely used in industrial boilers, drying equipment (such as grain drying), heat treatment industries, etc. Categories:Branded burners Riello

Riello gas burner RS250

Riello gas burner RS250 RS250 is a dual-section fire light oil gas burner of the Italian RIELLO brand, suitable for industrial heating equipment such as steam boilers, hot water boilers, thermal oil furnaces, etc. Fuel type: supports natural gas (G20/G25) and liquefied petroleum gas (LPG), and can be adapted to different gas sources by replacing accessories. Electric power Total power 5.5 kW, motor power 4.5 kW, start current 126-72.8 A. Core features Double-section fire design: Efficient combustion control is achieved through the combustion stages of two different firepowers, suitable for different working conditions. ‌Fuel/gas compatibility‌: supports two fuels, light oil and gas, and has a wider range of applications. ‌Electronic control system‌: It is equipped with a display screen to display operating parameters (such as operation time, number of ignitions, and fault information) in real time, which is convenient for maintenance and management. ‌Noise reduction design‌: Use sound insulation materials to reduce operating noise and optimize the working environment. Application scenarios: It is mainly used for combustion control of industrial boilers, hot air generators, direct combustion air conditioners and other equipment, and is suitable for hotels, factories, commercial places and other scenarios. Categories:Branded burners Riello

Riello heavy oil burner P200 P-N

Riello heavy oil burner P200 P-N P200 P-N is a two-stage fire ratio-regulated heavy oil burner specially designed for medium and large industrial heating systems. It is suitable for steam boilers, hot water boilers and thermal oil furnaces and other equipment. Power range: 570-2280 kW, covering medium and high load requirements. ‌Power‌: three-phase 380V/50Hz, motor power 4kW, heavy oil preheater power 14kW. Fuel type: Heavy oil (viscosity ≤50 mm²/s at 50°C), with built-in 14 kW preheater to ensure stable combustion. Operating mode: supports two-stage fire ratio adjustment, and the combustion intensity can be automatically adjusted according to load needs, taking into account efficiency and flexibility. Core functions Two-section fire ratio adjustment Precise load control: Drive the variable cam by servo motor to achieve smooth switching between one fire (minimum output) and two fire (maximum output), with a proportional adjustment range of 1:4. Fuel supply optimization: The gas butterfly valve can be connected from the left or right side, and can be quickly opened with the pressure control valve (VR) to achieve rapid opening of the ignition load and slow adjustment at full load to ensure combustion stability. Intelligent monitoring and diagnosis Electronic control box: display the operating status in real time (such as the number of running hours and ignition times), and diagnose the cause of failure through red/yellow LED indicators and pulse code (such as weak flame signal and abnormal oil supply) Efficient combustion and environmental protection performance Safety protection mechanism: equipped with main solenoid valve leakage detection device (forced installation when power is > 1200 kW), air pressure switch and high and low gas pressure switch to ensure safe operation. Convenience of maintenance Accessories compatibility: Supports a variety of options (such as extended combustion heads, post-purging components), which can be flexibly adapted to different boilers and working conditions. Typical application scenarios Industrial fields: steam boilers and thermal oil furnaces in chemical, papermaking, food processing and other industries. Categories:Branded burners Riello

Riello light oil burner P450T-G

Riello light oil burner P450T-G P450T-G is a three-section fire ratio-adjusted light oil burner specially designed for medium and large industrial heating systems. It is suitable for steam boilers, hot water boilers and thermal oil furnaces and other equipment. Control method: three sections of fire. Total power: 15 kW (motor power), start current: 24 A (230V) or 14 A (400V). Power supply: three-phase 380V/50Hz, motor power 15kW. Core functions Three sections of fire precise adjustment Flexible load control: Through the three-position hydraulic cylinder driving damper opening, smooth switching of first-stage fire (minimum output), second-stage fire (medium load), and third-stage fire (full load), meeting dynamic thermal needs. Nozzle combination optimization: Three 60° nozzles are standard, with a maximum flow rate of 193 kg/h (single nozzle). The step-by-step adjustment of combustion strength is achieved through different combinations to improve combustion efficiency. Efficient combustion and environmental protection performance Safety protection mechanism: equipped with main solenoid valve leakage detection device, air pressure switch and high and low fuel pressure switch to ensure safe operation. Convenience of maintenance Accessories compatibility: Supports a variety of options (such as extended combustion heads, post-purging components), which can be flexibly adapted to different boilers and working conditions. Applicable scenarios: Suitable for industrial equipment heating, boiler heating and other scenarios, it has three-stage firepower adjustment function, and can accurately control the gas supply through a servo motor. Categories:Branded burners Riello

Riello gas burner RS 310-E ULX

Riello gas burner RS 310-E ULX RS 310-E ULX is an ultra-low nitrogen gas burner specially designed for medium and large industrial heating systems. It is based on innovative ULX combustion technology and is suitable for steam boilers, hot water boilers and thermal oil furnaces. Power range: 650-3500 kW, covering medium and high load requirements. Power supply: three-phase 380V/50Hz. Fuel type: Natural gas (G20/G25), supports stable combustion without preheating system, simplifying equipment configuration. Operating mode: Supports proportional adjustment (through external 4-20 mA/0-10 V signal) or two-stage fire mode, with a proportional adjustment range of 1:5, and the combustion intensity can be dynamically adjusted according to load demand. Core functions Ultra-low nitrogen combustion technology ULX combustion head: Through gas grading and internal flue gas recirculation, NOx emissions can be stably controlled below 40 mg/Nm³ under FGR (flue gas external circulation), and some working conditions can reach below 30 mg/Nm³, significantly reducing the impact on the environment. Intelligent control and diagnosis Proportional adjustment function: The damper and gas butterfly valve are independently controlled by the servo motor, combined with the PID logic regulator, accurate load tracking is achieved, and the adjustment is fast and the stability is high. Security protection mechanism Gas leakage detection: Standard gas pressure switch and main solenoid valve leakage test (compliant with EN 161 gas valve set standards) to ensure that the fuel system has no leakage risk. Convenience of maintenance Accessories compatibility: supports a variety of optional accessories (such as extended combustion heads, post-purging components), which can flexibly adapt to different boiler structures and working conditions. ‌Electronic proportional adjustment‌: The air/fuel ratio is accurately controlled through the servo motor, and the remote control of 4-20mA signal is supported. Typical application scenarios: Industrial fields: large steam boilers and thermal oil furnaces in chemical, papermaking, food processing and other industries. Categories:Branded burners Riello

Riello gas burner RS510-E BLU

Riello gas burner RS510-E BLU RS 510-E BLU is an ultra-low nitrogen gas burner specially designed for medium and large industrial heating systems. It is based on innovative BLU combustion technology and is suitable for steam boilers, hot water boilers and thermal oil furnaces. Power supply: three-phase 380V/50Hz‌. Power range: 1800-5250 kW, covering medium and high load requirements. Total power: 13.8 kW (including motor 12 kW), start current: 26.7/15.4 A (400V/3Ph). Fuel type: Natural gas (G20/G25), supports stable combustion without preheating system, simplifying equipment configuration. Operating mode: Supports smooth two-stage fire or proportional adjustment is achieved by installing a PID ratio regulator. The proportional adjustment range reaches 1:5, and the combustion intensity can be dynamically adjusted according to load requirements. Functional Features ‌Electronic proportional adjustment‌: The air/fuel ratio is accurately controlled through the servo motor, and the remote control of 4-20mA signal is supported. ‌Low nitrogen combustion technology‌: adopts hierarchical combustion and internal exhaust gas recirculation technology, and can achieve ultra-low emissions without an external FGR system‌. ‌Modular Design‌: Integrated structure simplifies installation, saving boiler room space and installation costs‌. ‌Safety Protection‌: Integrated flame monitoring, wind pressure switch and other safety devices‌. Application scenarios ‌Industrial Boilers‌: Suitable for steam boilers, thermal oil furnaces, etc., to meet the needs of coating, food processing and other industries‌. Categories:Branded burners Riello

Riello gas burner DB20 SE FGR

Riello gas burner DB20 SE FGR Model: DB20 SE FGR DB20 SE FGR is a low-nitrogen oxide emission gas combustion equipment specially designed for industrial boilers. It is based on flue gas recirculation (FGR) technology and is suitable for steam boilers, hot water boilers and thermal oil furnaces. Fuel type: Natural gas/liquefied gas. Total power is approximately 9.1 kW (including motor 7.5 kW), starting current is 14/8.1 A (400V/3Ph). Functional Features ‌FGR technology‌: Reduce combustion temperature through exhaust gas recirculation system and reduce nitrogen oxide generation‌. ‌Electronic proportional adjustment‌: supports remote control of 4-20mA signals to achieve accurate air/fuel ratio‌. ‌Safety Protection‌: Integrated flame monitoring, wind pressure switch and other safety devices‌. ‌Split Design‌: Suitable for boiler room renovation scenarios with space-constrained. Applicable scenarios: Applicable to high-thermal energy demand scenarios such as hospitals, food processing plants, chemical enterprises, etc., and supports the optimization of thermal oil heating systems. Categories:Branded burners Riello

Riello Low nitrogen gas burner RS25-M BLU TC FS1

Riello Low nitrogen gas burner RS25-M BLU TC FS1 RS25-M BLU TC FS1 is a low-nitrogen gas burner specially designed for small and medium-sized industrial heating systems. It is based on innovative BLU combustion technology and is suitable for hot water boilers, steam boilers and thermal oil furnaces. Power range: 44-2400 kW. ‌Supply pressure‌: 3-5KPa. ‌Fuel Type‌: Natural Gas/Liquefied Gas. ‌Control method‌: Electronic proportional adjustment (TC function supports closed-loop temperature control). Functional Features Temperature control (TC): Accurate temperature control is achieved through PID algorithm, suitable for scenarios where stable thermal output is required. ‌Low nitrogen combustion (BLU): Premixed combustion technology is used to reduce nitrogen oxide formation. ‌Single-Segment Fire Control (FS1): Suitable for equipment with low requirements for load fluctuations. ‌Safety Protection‌: Integrated flame monitoring, gas pressure switch and other safety devices. Typical application scenarios Industrial fields: small and medium-sized steam boilers and thermal oil furnaces in chemical, food processing, textile and other industries. Categories:Branded burners Riello

Riello gas burner RS70

Riello gas burner RS70 Model: RS70 RS70 is an industrial gas combustion equipment based on high-efficiency combustion technology and intelligent control logic, and is suitable for hot water boilers, steam boilers, thermal oil furnaces and other equipment. Power range: Covering small and medium-sized load requirements, typical output range is 192-814 kW, suitable for a variety of boiler models. Fuel type: Supports natural gas (G20/G25) and liquefied gas (LPG), no preheating system required, and simplifies equipment configuration. Running mode: Smooth two-section fire: Switch the base load needs by switching between two-section fires with preset size. Proportional adjustment: PID ratio adjuster and probe can be installed to achieve a 1:6 proportional adjustment range, dynamically match load changes (such as from 150 kW to 930 kW). Functional Features ‌Dual-section fire control‌: supports smooth transition adjustment to adapt to different load needs‌. ‌Microelectronics control box‌: monitors combustion status in real time and provides feedback on operational data. ‌Safety Protection‌: Integrated flame monitoring, gas pressure switches and other safety devices‌. Modular design: Valve group, controller and other components are standardized for easy maintenance. Applicable scenarios: Suitable for industrial boilers, hot air generators, thermal oil furnaces, spraying, casting, drying and other process equipment. Categories:Branded burners Riello

Riello gas burner RS44-E MZ

Riello gas burner RS44-E MZ Model: RS44-E MZ RS44-E MZ is an industrial gas combustion equipment based on high-efficiency combustion technology and intelligent control logic, and is suitable for hot water boilers, steam boilers, thermal oil furnaces and other equipment. The total power is approximately 0.7 kW (including motor 0.42 kW), and the starting current is 3.5 A (230V/1Ph). Power range: 100-550 kW (corresponding to thermal load about 85-470 Mcal/h)‌ ‌Fuel type‌: Natural gas/liquefied gas (G20/G25)‌ ‌Control method‌: Two-stage fire progressive adjustment (supports electronic proportional control)‌ Functional Features ‌Two-stage fire control‌: supports smooth transition adjustment and adapts to different load needs. ‌Electronic proportional adjustment‌: Accurate fuel/air ratio through 4-20mA signals‌. ‌Safety Protection‌: Integrated flame monitoring, gas pressure switches and other safety devices‌. Modular design: Valve group, controller and other components are standardized for easy maintenance. Application scenarios: Industrial boilers: suitable for hot water/steam boilers, thermal oil furnaces, etc. Categories:Branded burners Riello