Danfoss oil mouth 31.5 60° semi-solid

Danfoss oil mouth 31.5 60° semi-solid Oil mouth 31.5 60° semi-solid:This is the standard model of Danfoss OD series fuel atomizing nozzles, specially designed for medium and large industrial burners. Model meaning: "31.5" indicates the nozzle's flow rate, which is typically 31.5 USgal/h at a specific pressure; "60°" refers to the spray angle; "semi-solid" represents the spray pattern. Flow specification: 31.5 USgal/h Atomization angle: 60° semi-solid cone spray (between solid and hollow) Applicable oil: Light oil/Heavy oil (requires a 140μm Monel alloy filter) Functional features: Atomization control: The semi-solid flame mode balances combustion efficiency and stability, suitable for boiler systems. Typical applications: Industrial boiler burner matching. Commercial heating systems (requires matching with nozzles of other angles from 30° to 80°)

Danfoss oil mouth 28.0 60° semi-solid

Danfoss oil mouth 28.0 60° semi-solid oil mouth 28.0 60° semi-solid:It is a Danfoss brand atomization nozzle assembly designed for combustion engine fuel systems. Spray hole specifications: 28.0 gallons/hour flow rate (approximately 106L/h), 60-degree spray cone angle, semi-solid atomization mode. ‌Adapted fuel‌: Light oil/heavy oil combustion engine, the working pressure range is usually 10-20 bar. Functional Features: o‌ne.Atomization control‌ Semi-solid oil mist is formed through precision-processed spray holes, taking into account combustion efficiency and flame stability. ‌two. Corrosion-resistant design‌ The main body of copper alloy material is long-term resistant to fuel sulfide corrosion.

Danfosss electric valve ICM 40-B D(027H4001)

Danfosss electric valve ICM 40-B D(027H4001) Category: Burner accessories The ICM 40-B D(027H4001) electric valve is a modular industrial control valve in the ICV Flexline™ series, designed for high-pressure natural refrigerants such as carbon dioxide, ammonia. Modular structure: It consists of three parts: low-temperature resistant carbon steel valve body (direct welding interface), functional module/upper end cover (model 027H4181*), and ICAD electric motor drive unit. This design supports rapid installation and maintenance. Temperature range: -60 to +120°C, adapted to extreme industrial environments. Working pressure: 40 bar (ICM40 model). High-precision flow regulation is achieved through V-spool optimization. Functional application: It acts as an electric expansion valve to regulate the flow rate of the liquid pipeline. Control the pressure or temperature of the dry/wet suction pipe and hot gas pipeline. It is cooperated with ICAD600/900 drivers and supports 4-20mA analog or digital signal control. Advantages: Compact and lightweight design (the entire valve weighs only 5.3kg), suitable for high-pressure refrigerants, improves the energy efficiency of the system COP, and provides a magnetic manual opening device as an emergency operation option.

Danfoss electric valve ICM 32-B(027H3001)

Danfoss electric valve ICM 32-B(027H3001 Category: Burner accessories ICM32-B(027H3001) electric valve is a modular control valve designed for industrial refrigeration systems. It adopts a lightweight and compact structure and supports direct welding interface. The valve body is made of low-temperature resistant carbon steel. ‌Adjustment function‌: Accurately control the throttling and expansion process of the liquid pipeline (regardless of whether the medium undergoes phase change), is suitable for dry/wet suction pipelines and hot gas pipelines, and can adjust temperature or pressure. Operating temperature range: -60°C to +120°C, maximum pressure bearing 65 bar. Equipped with a V-type flow port valve core, maintaining high adjustment accuracy during partial load. Compatibility advantages: Support natural refrigerants such as ammonia and carbon dioxide, as well as high-pressure future refrigerants, and modular design allows for rapid replacement of functional components (such as valve bodies, electric motors).

Danfoss electric valve driverI CAD 600A(027H9075)

Danfoss electric valve driverI CAD 600A(027H9075) Category: Burner accessories The ICAD 600A is a digital actuator designed for ICM series electric valves, using high-speed stepping motor technology, suitable for industrial refrigeration systems. Adaptive valve: specially designed for small and medium-diameter electric valves such as ICM 20, 25, 32, etc., supporting DN20-DN32 butt welding or threaded connection. Control method: Supports analog signal (4-20mA/0-10V) or digital signal (on/off) control, adapts to ICM20 to ICM150 specification valves, Built-in human-machine interface (MMI), the valve opening is displayed in real time through the LCD display, and it is equipped with a three-key programming menu. Power supply: 24V DC (±15% fluctuation), power consumption ≤30W, support redundant power input for improved reliability. Temperature range: medium temperature - 60℃ to + 120℃, which can operate stably in CO₂ transcritical systems. Safety protection: When power is off, you can select the valve action mode (close/open/keep in place/preset opening), password protection and historical alarm recording functions. The shell is made of aluminum alloy, the top is made of PBT plastic, and the protection level is IP67/NEMA 6.

Danfoss ignition transformer EBI (052F0030)

Danfoss ignition transformer EBI (052F0030) Category: Burner accessories EBI (052F0030)‌ is a ‌high-pressure ignition transformer‌ designed for gas burners, belonging to the Danfoss combustion control product line. This transformer is used to generate high-pressure sparks and reliably ignite gas/air mixtures. It is suitable for gas combustion systems such as industrial boilers, commercial burners, heat treatment equipment, etc. Input voltage: 230V AC (50/60Hz), power 60VA. Output voltage: 15kV, short circuit current 40mA RMS. Protection design: enclosure protection rating IP40, can operate stably from -25°C to +60°C, resisting vibration and electromagnetic interference. Core functions: efficient ignition control, safety and protection mechanism, compatibility and scalability. High voltage pulse generation: Convert the 230V input voltage to a 15kV pulse through a high-frequency oscillation circuit for a duration of 0.1-0.3 seconds to ensure rapid ignition of gas or fuel. Multi-fuel adaptation: supports gas (natural gas, LPG) and light oil (such as 28-second fuel), optimize the ignition effect of different fuels through electrode gap adjustment (2-3mm recommended).