Schneider shampoo actuator MD603 A200

Schneider shampoo actuator MD603 A200 The MD603 A200 is a high-precision electric actuator specifically designed for industrial combustion systems, mainly used to control the opening of air dampers to regulate combustion efficiency and safety. It belongs to Schneider's MD series of damper actuators and is suitable for HVAC systems, industrial burners, and ventilation equipment. Its design focuses on multi-stage damper control, especially in gas-fired burners, where it precisely adjusts the damper opening to achieve seamless switching between low and high combustion conditions. Interface type: It features an axial installation design, compatible with standard damper shaft diameters, and supports both horizontal and vertical installation. Protection class: IP54, capable of resisting dust and splashing water, making it suitable for industrial environments. Adjustment range: 0° to 90° mechanically adjustable. The yellow cam (ST1) sets the low combustion damper position, the red cam (ST2) sets the high combustion position, and the blue cam (MV) controls the opening and closing of the solenoid valve. Core functions: Multi-cam segmented control, manual adjustment and mechanical limit, safety and reliability design. Typical application scenarios Gas burner: Adjust the amount of combustion-supporting air to optimize combustion efficiency and reduce NOx emissions. HVAC system: Control the fresh air / return air dampers to maintain indoor air quality and temperature balance. Industrial ventilation: Monitor the pressure difference of the fan to prevent pipe blockage or fan failure.

Schneider shampoo actuator STAB B0.3618 2N36 L

Schneider shampoo actuator STAB B0.3618 2N36 L STAB B0.3618 2N36 L (is a high-precision electric actuator specially designed for industrial combustion systems. It is mainly used to control damper opening to optimize combustion efficiency and safety. Power supply type: Supports 230V AC/50Hz standard power supply, compatible with industrial environment requirements. Protection level: IP40 (dust-proof, vertical drip-proof), adapts to conventional industrial scenarios, but needs to avoid high humidity or dust-intensive environments. Core functions: one. Multi-cam segment control Low-combustion/high-combustion switching: The positions of low-combustion and high-combustion air doors are set separately through independent cams, such as the yellow cam (ST1) corresponding to the small fire state (recommended scales 30~40), and the red cam (ST2) corresponding to the large fire state (recommended scales 60~70). The two can be accurately switched through mechanical limits. Solenoid valve linkage: The blue cam (MV) is linked to the main gas solenoid valve to ensure that the damper opening and gas flow are adjusted simultaneously to avoid the risk of fire. Two. Manual adjustment and mechanical protection Convenience of on-site debugging: The cam can be manually rotated without powering up, and the damper position is intuitively set through the dial, which is suitable for fine calibration in the early stages of installation. three.High precision control and reliability Quick response: 90° stroke time ≤150 seconds to ensure timely adjustments under dynamic working conditions. Application scenario: It is specially optimized for gas/fuel burner damper control, which can achieve accurate adjustment of air-fuel ratio. Gas combustion engine: adjusts the amount of combustion air, optimizes combustion efficiency, and reduces NOx emissions.

Brahma solenoid valve E6G AP 1-2 AFD5 (13707512)

Brahma solenoid valve E6G AP 1-2 AFD5 (13707512) Product code: 13707512 Category: Burner accessories BRAHMA brand industrial-grade gas solenoid valve, a normally closed safety cut-off device specially designed for burner systems. This solenoid valve belongs to the BRAHMA E6G series, and is core to be used for safe opening and closing of gas burners and flow regulation, and achieves combustion efficiency optimization and safety protection through precise control of gas on and off. Its design focuses on multi-stage control, especially suitable for burners from brands such as BALTUR and Riello. Power supply type: 230V AC/50Hz, compatible with industrial environment requirements. Protection level: IP65 (dust-proof, water-spray-proof), adapted to high humidity or dust-intensive environments. Core functions: closed and slow opening control, high-precision flow adjustment, intelligent control and reliability. Typical application scenarios Gas boiler: adjust the main gas flow, optimize the air-fuel ratio with the damper actuator, and reduce NOx emissions. Industrial burners: Control the gas supply during the preheating phase to prevent deflagration. HVAC system: linking with the thermostat to realize automatic switching of heating/cooling mode.

Honeywell pressure regulating valve 1803（Main ORI 1 1-4''）

Honeywell pressure regulating valve 1803（Main ORI 1 1-4''） MODEL:1803 SPRING:2.0-3.0PSIG ORIFICE:3/4" SIZE CON: 2 INCH SCREWED Pressure regulating valve:It is a high-precision pressure control device specially designed for industrial gas systems. Its core is used for pressure regulation of natural gas, liquefied petroleum gas (LPG) and non-corrosive gases. Core functions: high-precision pressure regulation, safety protection and reliability, modular design and maintenance convenience.

Honeywell controller TF 834E.3

Honeywell controller TF 834E.3 TF 834E.3 is a single-stage combustion safety controller specially designed for oil-fueling combustion systems. Its core is used in the safety control and combustion management of small and medium-sized oil-fuel boilers, industrial burners and hot air furnaces. TF 834E.3 belongs to the TF 834 series, and is designed to focus on safety monitoring and timing control of fuel combustion processes, and is adapted to single-stage fuel burners (such as diesel, heavy oil) with fuel consumption of ≤30 kg/h. Its core functions include burner start-up purge, ignition control, flame monitoring and fault protection, especially for Swedish BENTONE brand burners. Power requirements: 230V AC ±15%, 50/60Hz. Protection level: IP40 (dust-proof), adapted to industrial environment (temperature - 20℃~+60℃). Core functions: combustion timing control, safety protection mechanism, flame monitoring and compatibility. Typical applications: boiler combustion timing control, hot air furnace safety interlocking system.

Honeywell combustion controller BC1000A0220F-E

Honeywell combustion controller BC1000A0220F-E Category: Burner accessories BC1000A0220F-E is a flame safety switch-type controller designed for small and medium-sized burners. The core functions focus on safe start monitoring and flame state control of the combustion system. Power requirements: 220-230V AC ±15%, 50/60Hz, power consumption ≤5W. Detection method: Supports dual modes of ion probe and UV ultraviolet probe. Environmental adaptability: operating temperature - 20℃~+60℃, protection level IP40 (dust-proof), anti-electromagnetic interference capability. Core functions: combustion timing control, safety protection mechanism, compatibility and adaptability.

RIELLO motor 475SE (3005286)

RIELLO motor 475SE (3005286) Category: Burner accessories The 475SE is a single-phase series excitation motor designed for small and medium-sized burners. The core function focuses on the fan or oil pump that drives the burner to provide stable power output. Power and voltage: 250W single-phase motor, adapted to 220-230V AC ±15%, power supply at 50/60Hz. ‌Speed: 3350rpm ‌Scope of application: Burner equipment. Core functions: power output characteristics, safety protection mechanism, compatibility and adaptability. Functional features: This motor is specially designed for burners, providing stable power support to ensure the reliability of the equipment operation.

RIELLO electrode（3003894）

RIELLO electrode（3003894） Product number：3003894 Category: Burner accessories Electrode: This is an ignition electrode specifically designed for small and medium-sized burners. Its core function focuses on igniting fuel through a high-voltage arc to ensure the safe start-up and stable operation of the burner. Functional Features The main function is to discharge the high-voltage electricity generated by the ignition transformer through the electrode head to ignite the fuel sprayed by the burner. Its structure takes into account both insulation and conductivity, ensuring the safe release of high-voltage electricity and precise triggering of the combustion reaction. Electrical Parameters: Compatible with ignition transformer output voltage of 2×5kV to 2×8kV, working current 15 to 30mA, response time ≤ 0.3 seconds. It adopts a nickel-chromium alloy electrode head that is resistant to high-temperature oxidation, combined with a ceramic insulating sleeve (for heat insulation), ensuring stability in high-temperature environments. Gas Burners: Compatible with RIELLO GULLIVER BS series (such as BS3, BS4), PRESS GW series (such as GW3, GW5). Oil Burners: Can be used with RL series (such as RL28, RL38), and should be used in conjunction with an oil atomizing nozzle (such as RIELLO 3001164).

DUNGS solenoid valve MB-VEF 412 B01 S30

DUNGS solenoid valve MB-VEF 412 B01 S30 Category: Burner accessories MB-VEF 412 B01 S30 is a gas multi-function combination valve designed for industrial combustion systems. The core functions focus on gas flow regulation, safe cutting and air-fuel ratio control. Maximum input pressure: 360 mbar (36 kPa). Voltage and power consumption: 230V AC ±15%, 50/60Hz, power consumption is about 50VA. Protection level: IP54 (dust-proof and splash-proof), adapted to industrial environment (temperature - 15℃~+70℃). Core functions: gas flow regulation and air-fuel ratio control, safe cutoff and redundant design, compatibility and adaptability.

DUNGS push valve PB2 (273370)

DUNGS push valve PB2 (273370) Push valve PB2: is a manual control safety cutoff device specially designed for gas systems. The core function focuses on manually releasing gas supply and quickly cutting off to ensure the safe start and stop of the combustion system. Maximum input pressure: 500 mbar (50 kPa). Protection level: IP54 (dust-proof and splash-proof), adapted to industrial environment (temperature - 15℃~+80℃). Core functions: manual gas control logic, test and exhaust functions, adaptability and expansion. Typical applications: manual gas isolation during burner maintenance, bypass control of gas detection system, and redundant operating interface of emergency cutoff system.

RIELLO insulated ceramic tube（3012258）

RIELLO insulated ceramic tube（3012258） Category: Burner accessories High insulation: can withstand thousands of volts, suitable for high-voltage circuit isolation. High temperature resistance: The working temperature can reach 800-1200℃, and some special ceramic tubes can withstand high temperatures above 1600℃. Corrosion resistance: It has strong resistance to chemical substances such as acids and alkalis, and is suitable for harsh industrial environments. High mechanical strength: the bending strength can reach 300-500MPa, which is not easy to break. Low dielectric loss: small signal loss in high-frequency circuits, suitable for precision electronic equipment. Core functions: high-voltage insulation, high-voltage insulation, thermal management. Applications: Burner ignition electrode insulation, high-voltage circuit isolation (such as insulation support in UPS equipment), and wire protection sleeves in high temperature environments.

RIELLO control box OR3

RIELLO control box OR3 OR3 is a special program controller/control box for RIELLO burners, mainly used for the operation control of fuel burners. Voltage compatibility: Supports wide voltage input 220/240V, 50/60Hz, adapts to power environments in different regions. Anti-interference ability: built-in filtering circuit to reduce electromagnetic interference from inverters and other equipment, ensuring signal stability. Main functions ‌Control the operation of the burner: manages the ignition, flame monitoring and operation cycle of the burner through built-in programs (including pre-purging, ignition, combustion and other stages). ‌Troubleshooting‌: Equipped with a fault reset button and LED indicator, supporting remote reset operation. ‌Compatibility‌: Applicable to RL series burners (such as RL28, RL38, etc.), which can achieve remote control.

RIELLO burning cylinder BS3-M (3008011)

RIELLO burning cylinder BS3-M (3008011) Product number：3008011 Category: Burner accessories BS3-M is mainly used for efficient combustion and low pollution emission control of natural gas or liquefied petroleum gas (LPG). BS3-M belongs to the RIELLO BS series standard combustion cylinder. Adaptive model: specially designed for BS3/M, BS4/M and other first-stage low-nitrogen burners. Integrated DUNGS gas valve group, built-in dual solenoid valve safety cut-off function. Standard air pressure switch (monitoring combustion air pressure) and flame detection electrodes. Core functions: fuel mix optimization, low nitrogen emission control, mechanical stability.

RIELLO probe（3013725）

RIELLO probe（3013725） Category: Burner accessories Probe is an ion flame detection probe designed for burners, mainly used to monitor combustion status in real time and trigger safety protection mechanisms. Burner matching: To adapt to RIELLO RS series gas burners (such as RS190, RS44/1), it is necessary to use ion probe wiring plug-ins to achieve electrical connection. Temperature resistance: Metal heads are temperature resistant, and ceramic insulation layer is temperature resistant. Protection level: IP65 (dust-proof and waterproof), can resist dust and steam pollution in the boiler environment. Core functions: flame presence detection, safety protection mechanism, compatibility and adaptability.

RIELLO stable flame disc BS3D (3007995)

RIELLO stable flame disc BS3D (3007995) Product code:3007995 Category: Burner accessories Model: BS3D BS3D belongs to the RIELLO BS series standard burner components and is specially designed for oil and gas dual-purpose burners. ‌Adaptive model‌: Compatible with dual-fuel low-nitrogen burners such as BS3D and BS4D, and is adapted to power range of 16-250kW. ‌Core functions: flame stability control, flame stability control, mechanical durability.