SIEMENS power transformer AGG5.220

SIEMENS power transformer AGG5.220 AGG5.220 is an industrial-grade power transformer designed for burner control systems, especially suitable for SIEMENS LMV5 series electronic air/fuel ratio control systems. Electrical characteristics: Input voltage 230V 50-60Hz, triple output: 12Vac 1.2A (main control loop) + dual 12Vac 4.3A (drive loop), Operating temperature range is -20℃ to +70℃. Output type: DC 12V (isolated dual-channel). Power range: 103VA. Application scenario: Power supply to the control system. Interface type: Rast 5 connector. Typical Applications Burner control system: provides power for LMV51.100C2, LMV52.200B2 and other models of controllers, and is suitable for gas/fuel burners with thermal power of ≤10MW. Industrial Automation: As a backup power supply for distributed I/O modules such as ET 200S, or auxiliary power supply for PLC expansion modules such as SIEMENS 6ES7 series.

SIEMENS control box LMV37.410A2WH

SIEMENS control box LMV37.410A2WH Model: LMV37.410A2WH LMV37.410A2WH is a microprocessor-controlled combustion management system designed for medium and high power burners. The core functions include combustion process automation control, safety interlocking and air-fuel ratio optimization. Electrical characteristics: Supply voltage 230VAC±10%, frequency 50-60Hz Operating temperature range -20°C~60°C Mechanical characteristics: compact design, plastic housing, clamped mounting structure. Core functions Intelligent combustion control: Integrated eBUS communication protocol, support remote monitoring and parameter configuration With flame monitoring function, real-time feedback on combustion status Support proportional adjustment (PID control), air-fuel ratio accuracy ±2% Safety protection system: Dual-channel safety circuit design TSA (safe time monitoring) function, automatic fuel cutoff after timeout Device compatibility: Designed for Weishaupt burners (WM-L/G/GL series) Supporting servo motors, solenoid valves and other actuators Typical configuration: Fuel burner: WM-L10/L20/L30 Gas burner: WM-G10/G20/G30

SIEMENS control box LOK16.250A27

SIEMENS control box LOK16.250A27 LOK16.250A27 is an intelligent combustion controller specially designed for fuel burners by SIEMENS, and belongs to the core model of the LOK16 series. Core functions‌ ‌one.Multi-fuel control‌ Designed for forced ventilation large and medium-sized burners, it supports fuel/gas multi-stage adjustment and proportional continuous adjustment mode, and the main voltage is compatible with AC220V-240V (±10%). ‌two.Intelligent security monitoring‌ Integrated self-test flame signal amplifier (silicon photodetector RAR9). Monitor flame signals in real time and can identify 16 types of faults such as detector failures, cable abnormalities, and false flames. Equipped with an air pressure sensor to realize closed-loop control of the damper baffle. ‌three.Industrial reliability Protection level IP40 (prevent solid particles from invasion). Working temperature -20℃~+60℃. Frequency range: 50/60Hz.

SIEMENS comparison instrument RWF50.20A9

SIEMENS comparison instrument RWF50.20A9 Comparison instrument RWF50.20A9RWF50.20A9‌ is a digital proportional regulator specially designed for industrial burners. It belongs to the Siemens RWF50‌ series of products and is mainly used for temperature or pressure control of boilers, hot air furnaces and other equipment. Input voltage‌: AC 100V–240V ±10%, 50/60Hz‌. ‌Output Form‌: 3-bit relay output (increase/decrease control). ‌Protection Level‌: IP65 (dust-proof and waterproof). ‌Operation temperature‌: -20℃ to +50℃‌. Main functions o‌ne.PID Intelligent Adjustment‌ Through the digital PID control algorithm, the air-fuel ratio of the burner is adjusted in real time and the combustion efficiency is optimized. ‌two.Two section fire control‌ It supports two-stage combustion mode, can automatically switch small fire/high fire operation according to needs, and control the actuator through relay output. ‌three.Status display and monitoring‌ Two-color LED display: green displays the set value, red displays the measured value‌. The burner damper position, pulse signal and working status (on/off, 1st section fire/2nd section fire) are fed back in real time through the indicator light. ‌four.Automatic adjustment function‌ It can automatically determine PID adjustment parameters to simplify the debugging process‌. Application scenarios‌ Combustion control of industrial boilers and thermal oil furnaces‌. Gas/fuel systems that require proportional adjustment or two-stage fire control‌.

SIEMENS servo motor SQM56.687A1

SIEMENS servo motor SQM56.687A1 SQM56.687A1‌ is a high-performance AC servo motor, belonging to the SQM5 series electric actuators, mainly used for gas/air valve control and damper adjustment in industrial combustion systems. The motor adopts ‌Permanent Magnet Synchronous Motor (PMSM)‌ technology, and has the characteristics of ‌high dynamic response, low moment of inertia, high torque density‌. Supply voltage: AC 110V±10% (50/60Hz), power consumption is about 20VA, built-in overcurrent protection (trip current 3A). Protection level: IP54 (dust-proof and splash-proof). Power output: Directly drive mechanical loads (such as valve shaft). Control target: Adjust the angle position or opening of the valve/storm. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQM48.497B9

SIEMENS servo motor SQM48.497B9 SQM48.497B9 belongs to the SQM48 series electric actuators, mainly used for gas/air valve control and damper adjustment in industrial combustion systems. Running time: 30 seconds / 90° (AC 2x12V powered), supports speed adjustment through the burner controller (such as 60 seconds / 90° mode). Torque output: 20N・m (continuous load), peak torque can reach 20N・m, suitable for medium and high resistance valve drives. Supply voltage: AC 2x12V±10% (50/60Hz), power consumption is about 26-34VA, built-in overcurrent protection (trip current 3A). Protection level: IP54 (dust-proof and splash-proof), optional IP65 upgraded version, suitable for humid or dusty environments. Mechanical interlock: Manual/automatic switching clutch allows manual operation of the valve with special tools during power outage to avoid control failure in emergencies. Overload protection: Built-in torque limiter, which automatically disengages when the load exceeds the set value (such as valve jams), prevents the motor from burning. Control target: Adjust the angle position or opening of the valve/storm. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQN71.664A20

SIEMENS servo motor SQN71.664A20 SQN71.664A20 belongs to the SQN7 series electric actuators, mainly used for the control of damper baffles and fuel regulating valves for small and medium-sized fuel or gas burners. Torque output: 2.5N・m (continuous load), peak torque can reach 2.5N・m, suitable for medium and low resistance valve drives. Rotation angle: 0-90° (can be expanded to 130°), mechanical backward difference <1%, repeat positioning accuracy ±0.5°. Running time: 30 seconds / 90° (powered at 50Hz), supports speed adjustment through the burner controller (such as 60 seconds / 90° mode). Supply voltage: AC 230V±15% (50/60Hz), power consumption is about 6VA, built-in overcurrent protection (trip current 3A). Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision control of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: adjust the angle position or opening of the valve/storm. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: industrial valve control, combustion system adjustment.

SIEMENS servo motor SQN90-240B2793

SIEMENS servo motor SQN90-240B2793 SQN90.240B2793 belongs to Siemens SQN90 series electric actuators, mainly used for damper baffle control and air-fuel ratio adjustment of small and medium-sized fuel/gas burners. Torque output: 2.4N・m (continuous load), suitable for driving medium and low resistance dampers or gas valves. Rotation angle: 0-90° (mechanical limit adjustable), repeat positioning accuracy ±1%, mechanical backward difference <0.5°. Running time: 12 seconds / 90° (AC 220-240V powered), speed adjustment can be made through the burner controller (such as 24 seconds / 90° mode). Shaft specification: 14mm diameter with keyway output shaft, compatible with the damper installation interface of mainstream burners such as RIELLO and Weishaupt. Supply voltage: AC 220-240V±10% (50/60Hz), power consumption 8VA, built-in overcurrent protection (trip current 1.5A). Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision adjustment of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: damper angle position or burner load adjustment. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: combustion system and damper control of industrial furnaces.

SIEMENS servo motor SQN90-570A2793（3012885）

SIEMENS servo motor SQN90-570A2793（3012885） SQN90-570A2793 (3012885) belongs to the SQN90 series electric actuators, mainly used for damper baffle control and air-fuel ratio adjustment of small and medium-sized fuel/gas burners. Torque output: 2.4N・m (continuous load), suitable for driving medium and low resistance dampers or gas valves. Rotation angle: 0-90° (mechanical limit adjustable), repeat positioning accuracy ±1%, mechanical backward difference <0.5°. Running time: 24 seconds / 90° (AC 220-240V powered), speed adjustment can be made through the burner controller (such as 48 seconds / 90° mode). Shaft specification: 14mm diameter with keyway output shaft, compatible with the damper installation interface of mainstream burners such as RIELLO and Weishaupt. Protection level: IP40 (dust-proof and solid foreign matter), suitable for dry or light dusty environments. Core functions: precision adjustment of combustion system, intelligent diagnosis and maintenance support, communication and expansion capabilities. Control target: damper angle position or burner load adjustment. Feedback mechanism: potentiometer (analog feedback) or auxiliary switch status. Overload protection: Mechanical torque limiter + electronic overload protection. Application scenarios: combustion system and damper control of industrial furnaces.

SIEMENS servo motor SQM33.511A9

SIEMENS servo motor SQM33.511A9 The SQM33.511A9 is a core component designed for burner control systems, mainly used to precisely adjust damper opening or fuel valves for efficient combustion and low emissions, adapted to LMV27 and LMV37 series combustion managers, commonly used for air-fuel ratio control of gas/fuel burners. Its design goal is to achieve high-precision adjustment through mechatronics while meeting reliability requirements in industrial environments. Protection level is: IP54. Drive mode: Use a synchronous motor with self-locking, with a running torque of 3Nm and a holding torque of 2.6Nm, supports clockwise/counterclockwise bidirectional rotation, and the maximum rotation angle is 160°. Electrical parameters: Operating voltage is 24V±20%, power consumption is 10W, can be controlled by analog signal (2-10V or 4-20mA), and feedback signal output is provided. Operating temperature range is -25°C to +60°C, anti-vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2), suitable for harsh environments such as boilers, hot air furnaces, smelting furnaces, etc. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners.

SIEMENS servo motor SQM33.711A9

SIEMENS servo motor SQM33.711A9 SQM33.711A9 is a high-precision actuator specially designed for industrial burners. The core function is to achieve efficient combustion and low emission control by dynamically adjusting the damper opening or fuel valve. It belongs to the Siemens SQM33 series digital servo motor, adapted to LMV27 and LMV37 series combustion managers, and is commonly used for air-fuel ratio control of gas/fuel burners. Its design goal is to achieve high-precision adjustment through mechatronics while meeting reliability requirements in industrial environments. Torque and stroke: Running torque 10 Nm (holding torque 6 Nm), 90° rotation stroke time 17 seconds, support clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), stable operation from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Electrical parameters: working voltage 24V±20%, power consumption 10W, supports analog control (2-10V or 4-20mA), and provides feedback signal output. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. Operating temperature range: -25°C to +60°C, anti-vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2), suitable for harsh environments such as boilers, hot air furnaces, smelting furnaces, etc.

SIEMENS servo motor SQM45.291B9

SIEMENS servo motor SQM45.291B9 SQM45.291B9 is a high-precision actuator specially designed for medium and large burners. It realizes precise control of dampers or fuel valves through CAN bus communication and is widely used in industrial and commercial combustion systems. SQM45.291B9 belongs to Siemens SQM45 series digital servo motors, designed for LMV5 series combustion managers. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting reliability requirements in industrial environments. Torque and stroke: Rated output torque 3 Nm, holding torque 1.5 Nm, 90° Rotation stroke time 10-120 seconds (can be adjusted via the LMV5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Mechanical design: Aluminum die-cast gear shaft housing is paired with a lifetime lubricated plastic cylindrical gear transmission, equipped with a D-type connecting shaft (10mm diameter) and a 6-pin RAST3.5 connector to ensure long-term reliable operation. Electrical parameters: Powered by CAN bus cable (AC 2×12V), driven by stepper motor, power consumption 9-15 VA, and position feedback (Hall sensor) supports 0.1° resolution. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multi-fuel adaptation: The gas and fuel mode can be switched through software configuration and is compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

SIEMENS servo motor SQM45.295B9

SIEMENS servo motor SQM45.295B9 SQM45.295B9 is a high-precision actuator designed for medium and large burners. It realizes dynamic control of dampers or fuel valves through CAN bus communication, and is especially suitable for flue gas recirculation (FGR) systems and low-nitrogen combustion technology. SQM45.295B9 belongs to the Siemens SQM45 series digital servo motor, designed for the LMV5 combustion manager. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting the reliability requirements in industrial environments. Torque and stroke: Rated output torque 3 Nm, holding torque 1.5 Nm, 90° Rotation stroke time 10 seconds (can be adjusted to 120 seconds through the LMV5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resistant to vibration (IEC 60068-2-6) and electromagnetic interference (EN 61000-6-2). Electrical parameters: Powered by CAN bus cable (AC 2×12V), driven by stepper motor, power consumption 9-15 VA, and position feedback (Hall sensor) supports 0.1° resolution. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Multiple limit protection: Built-in 2 mechanical limits and 6 auxiliary switches to prevent dampers or valves from exceeding the safe travel range. When mechanical jamming is detected, the motor will automatically stop and an alarm will be triggered through LMV5. Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

SIEMENS servo motor SQM50.424A2Z7R

SIEMENS servo motor SQM50.424A2Z7R Model: SQM50.424A2Z7R The SQM50.424A2Z7R is a high-precision actuator designed for medium and large burners. It realizes dynamic control of dampers or fuel valves through CAN bus communication, especially suitable for low-nitrogen combustion technology and multi-fuel switching systems. The core function is to dynamically adjust the air-fuel ratio during combustion to achieve efficient combustion and low emission control. Its design goal is to achieve precise adjustment of 0.1° level resolution through mechatronics, while meeting reliability requirements in industrial environments. Rated output torque: 15 Nm, hold torque: 7.5 Nm, 90° Rotation travel time: 34 seconds (can be adjusted to 120 seconds through the AGA58.5 controller), supports clockwise/counterclockwise bidirectional rotation, maximum rotation angle: 160°. Protection Class: IP54 (IP40 at cable outlet), can operate stably from -25°C to +60°C, resisting vibration and electromagnetic interference. Supply voltage: 220-240V~(50-60HZ), power consumption is: 20VA. Core functions: combustion process control, safety and protection mechanism, communication and scalability. Precise air-fuel ratio adjustment: Works in conjunction with the AGA58.5 combustion manager, receives instructions through the CAN bus, dynamically adjusts the damper opening or gas valve position to ensure the optimal mixing ratio of air and fuel. Multi-section fire control: supports smooth two-section fire or proportional adjustment, and dynamically adjusts the output according to load needs (such as boiler steam pressure). Multi-fuel adaptation: The gas and fuel modes can be switched through software configuration, and are compatible with dual-purpose oil and gas burners. For example, in industrial hot air furnaces, the damper opening and ignition timing can be automatically adjusted according to the fuel type.

SIEMENS high sensitivity bulb P578.61

SIEMENS high sensitivity bulb P578.61 Model: P578.61 Brand: sylvania Uses: Mainly used in flame detectors and ultraviolet photosensitive tubes. Siemens' core product in the field of industrial detection is the QRA series of flame detectors (such as QRA10M.C, QRA2M), which has built-in high-sensitivity UV photosensitive tubes that can detect ultraviolet signals of gas and fuel flames. Sensitivity: 0.01-10mW/cm² (adjustable) Response time: ≤0.1 seconds Protection Class: IP54, can operate stably from -25°C to +60°C. The core components of Siemens' high sensitivity detection technology: one.QRA series flame detectors How it works: Capture ultraviolet rays in the flame (wavelength 190-280nm) through UV photosensitive tubes, and realize high sensitivity detection (detection threshold ≤0.1mW/cm²) Two. Light source module in machine vision system Application scenarios: Siemens SIMATIC Machine Vision system (such as VS 110) uses infrared LED light sources to achieve high contrast imaging through high frequency flicker (20-300μs). It is suitable for electronic component detection, PCB defect recognition and other scenarios, with an accuracy of up to ±0.01mm.