Azbil flame detector AUD300C1000

Azbil flame detector AUD300C1000 AUD300C1000 is an advanced ultraviolet flame detector developed by Japan's azbil. It is designed for continuous/intermittent operation of oil and gas burners. It detects flames through the 185-260nm ultraviolet band, and integrates dynamic self-test functions to ensure safe control of industrial combustion systems. Core functions: high reliability flame monitoring, environmental resistance design, and convenient maintenance. Power supply voltage: 120/240V AC (50/60Hz). Temperature range: -20°C to +100°C. Protection level: IP66 dustproof and waterproof (under wiring connection), can resist dust, moisture and rainwater intrusion. Application scenarios Flame safety monitoring systems that require explosion-proof design, such as industrial boilers, gas turbines, etc. Used in conjunction with special controllers (such as the AUR300C series) to form closed-loop safety control.

Azbil controller ECM3000G910C

Azbil controller ECM3000G910C ECM3000G910C is a proportional control servo motor under Azbil. It is specially designed for burner damper adjustment, and can achieve efficient combustion management through precise control of air-fuel ratios. Core functions o‌ne.Proportional adjustment‌ Driven by 230V voltage, supports linear displacement feedback, and can be adapted to the damper opening control of the gas/fuel burner to ensure dynamic optimization of the air-fuel ratio. ‌two.Safety linkage‌ Built-in windproof function, working in conjunction with burner controllers (such as LMG series), adjusting damper position in real time through electrical signals to prevent instability in combustion. ‌three.Industrial compatibility‌ It is suitable for single-stage or two-stage fire combustion systems, with a typical output covering up to 350kW, meeting the needs of boilers, industrial heating equipment and other scenarios. Technical Features ‌Structural design‌: Right-angle installation interface, adapted to compact space, and the protection level meets industrial equipment standards. ‌Control Accuracy‌: Digital signal processing technology ensures fast and stable program control response.

SUNTEC oil pump AS47C 1538-6

SUNTEC oil pump AS47C 1538-6 AS47C1538-6 is an internal meshing gear pump specially designed for burners. It belongs to the AS series fuel delivery equipment and is suitable for a variety of liquid fuels (light oil, heavy oil, bio-oil, etc.), and is widely used in commercial and industrial combustion systems. Core functions ‌Fuel delivery and pressure regulation‌ Working viscosity covers 2.8-200 mm²/s (cSt), supports dynamic adjustment to meet different burner needs. Built-in pressure regulating valve can be adapted to proportional adjustment system, optimize combustion efficiency and reduce pollutant emissions. ‌Compatibility Design‌ The flange interface is standardized and adapted to mainstream burner brands such as RIELLO, WEISHAUPT, BALTUR, etc. Supports high speed operation of 3600 rpm, maximum inlet pressure of 1.5 bar, and oil temperature resistance range of 0-90℃. Electrical characteristics: electromagnetic drive, adapted to standard burner control system. Application scenarios Fuel supply system for industrial boilers, hot air furnaces and central air conditioners. Intermittent combustion equipment requiring high stability fuel delivery.

SUNTEC oil pump E7NCK10698P

SUNTEC oil pump E7NCK10698P E7NCK10698P is a high-pressure gear pump designed by SUNTEC, France, designed for heavy oil combustion systems, with industrial-grade corrosion resistance and high viscosity fuel adaptability. Core functions ‌one.High pressure fuel delivery Supports viscosity range of 2.8-200 mm²/s (cSt), and is suitable for high viscosity fuels such as heavy oil and bio-oil. Built-in pressure regulating valve can dynamically adjust the output pressure to meet the requirements of the burner air-fuel ratio optimization. ‌two.Industrial compatibility‌ The flange interface is standardized and compatible with mainstream burner brands such as RIELLO and BALTUR. High temperature resistance design (0-90℃), maximum inlet pressure of 1.5 bar, high speed operation of 3600 rpm. Electrical characteristics: electromagnetic drive, integrated into the burner control system. Application scenarios Heavy oil supply system for industrial boilers and hot air furnaces. Intermittent combustion equipment that requires stable high-pressure transportation.

Bentone Motor O1A095-065P0025-030-001OF0-617

Bentone Motor O1A095-065P0025-030-001OF0-617 Category: Burner accessories Model: O1A095-065P0025-030-001OF0-617 Brand: Bentone Power output: It may support precise speed regulation and adapt to inverter control. Feedback system: Some high-end models integrate position detection functions (such as single-cable technology of AL8000 linear motors). ‌Protection Level‌: Industrial-grade IP protection. ‌Structural features: If single-cable technology is used, the position detection function may be integrated to simplify the equipment installation process (similar to the design of the AL8000 series linear motor); if it is a modular design, it may support the integration of asynchronous motor drives and has harsh environmental adaptability.

Danfosss electric valve ICM 40-B D(027H4001)

Danfosss electric valve ICM 40-B D(027H4001) Category: Burner accessories The ICM 40-B D(027H4001) electric valve is a modular industrial control valve in the ICV Flexline™ series, designed for high-pressure natural refrigerants such as carbon dioxide, ammonia. Modular structure: It consists of three parts: low-temperature resistant carbon steel valve body (direct welding interface), functional module/upper end cover (model 027H4181*), and ICAD electric motor drive unit. This design supports rapid installation and maintenance. Temperature range: -60 to +120°C, adapted to extreme industrial environments. Working pressure: 40 bar (ICM40 model). High-precision flow regulation is achieved through V-spool optimization. Functional application: It acts as an electric expansion valve to regulate the flow rate of the liquid pipeline. Control the pressure or temperature of the dry/wet suction pipe and hot gas pipeline. It is cooperated with ICAD600/900 drivers and supports 4-20mA analog or digital signal control. Advantages: Compact and lightweight design (the entire valve weighs only 5.3kg), suitable for high-pressure refrigerants, improves the energy efficiency of the system COP, and provides a magnetic manual opening device as an emergency operation option.

Danfoss electric valve ICM 32-B(027H3001)

Danfoss electric valve ICM 32-B(027H3001 Category: Burner accessories ICM32-B(027H3001) electric valve is a modular control valve designed for industrial refrigeration systems. It adopts a lightweight and compact structure and supports direct welding interface. The valve body is made of low-temperature resistant carbon steel. ‌Adjustment function‌: Accurately control the throttling and expansion process of the liquid pipeline (regardless of whether the medium undergoes phase change), is suitable for dry/wet suction pipelines and hot gas pipelines, and can adjust temperature or pressure. Operating temperature range: -60°C to +120°C, maximum pressure bearing 65 bar. Equipped with a V-type flow port valve core, maintaining high adjustment accuracy during partial load. Compatibility advantages: Support natural refrigerants such as ammonia and carbon dioxide, as well as high-pressure future refrigerants, and modular design allows for rapid replacement of functional components (such as valve bodies, electric motors).

Danfoss electric valve driverI CAD 600A(027H9075)

Danfoss electric valve driverI CAD 600A(027H9075) Category: Burner accessories The ICAD 600A is a digital actuator designed for ICM series electric valves, using high-speed stepping motor technology, suitable for industrial refrigeration systems. Adaptive valve: specially designed for small and medium-diameter electric valves such as ICM 20, 25, 32, etc., supporting DN20-DN32 butt welding or threaded connection. Control method: Supports analog signal (4-20mA/0-10V) or digital signal (on/off) control, adapts to ICM20 to ICM150 specification valves, Built-in human-machine interface (MMI), the valve opening is displayed in real time through the LCD display, and it is equipped with a three-key programming menu. Power supply: 24V DC (±15% fluctuation), power consumption ≤30W, support redundant power input for improved reliability. Temperature range: medium temperature - 60℃ to + 120℃, which can operate stably in CO₂ transcritical systems. Safety protection: When power is off, you can select the valve action mode (close/open/keep in place/preset opening), password protection and historical alarm recording functions. The shell is made of aluminum alloy, the top is made of PBT plastic, and the protection level is IP67/NEMA 6.

Krom schrider gas valve GIK 65F02-6

Krom schrider gas valve GIK 65F02-6 Category: Burner accessories GIK 65F02-6 is a professional gas air-fuel ratio valve from the German Kromschroder brand, which is mainly used for precise adjustment of the gas-to-air ratio of combustion systems. Media adaptation: supports various combustible gases such as natural gas, liquefied gas (LPG) and biomethane. Pressure range: The pressure of the gas outlet behind the valve can be adjusted to 0-119mbar, and the air control pressure range is 0.5-10mbar. ‌Proportional Accuracy‌: The air-fuel ratio is constant 1:1, and the inlet pressure compensation diaphragm is used to achieve zero pressure cut-off. Core functions: one. Proportional adjustment: The gas pressure is automatically matched through the air pipeline pressure guide signal to ensure combustion efficiency and emission control. ‌two. Anti-interference: The furnace pressure fluctuations do not affect the air-fuel mixing ratio, and are suitable for high-temperature scenarios (such as boilers, heat treatment equipment). t‌hree.Modular Design‌: The GIK series can be converted to pulse control models (such as GIK..B) by replacing the bypass wire plug. Application scenario: Typically used in industrial combustion systems that require stable air-fuel ratio, including heat treatment furnaces, drying equipment and energy systems.

Krom schroder pressure gauge RMF 4RB 63

Krom schroder pressure gauge RMF 4RB 63 Category: Burner accessories RMF 4RB 63 is a precision measuring device specially designed for industrial gas systems. Its core function is to monitor the gas pressure in the pipeline or equipment in real time to ensure the stability and safety of the combustion process. Maximum working pressure: 190kPa Core functions: precision pressure monitoring, safety and reliability design, system compatibility. Performance characteristics Dynamic response: The response time of full range pressure change is ≤1 second, which can capture the pressure fluctuations during the start and stop of the burner. Overload protection: Built-in metal corrugated pipe, can withstand 1.5 times full-scale pressure shock. Temperature compensation: The effect of ambient temperature changes on accuracy is automatically corrected through the bimetallic sheet structure. Typical application fields: industrial combustion systems, gas transmission and distribution networks, construction machinery and other industrial fields.

Krom schroder pressure gauge RMF 10 RB 63

Krom schroder pressure gauge RMF 10 RB 63 Category: Burner accessories RMF 10 RB 63 is a precision measuring device designed for industrial high-pressure gas systems. Its core function is to monitor gas pressure in pipelines or equipment in real time to ensure the stability and safety of the combustion process. Measurement range: The range covers the range of 1.6-400Pa, and RFM10RB63 belongs to the specific range model in this series. Connection method: G1/2 threaded interface (DIN EN 10226-1), adapted to DN15~DN25 pipelines, can be expanded to a larger diameter through adapters. Custom flange connections (such as PN16) are available for special needs. Structural characteristics: Adopt RB63 standard interface size (63mm dial), and some models can choose RB100 specifications (100mm dial). ‌Application Scenario: Suitable for industrial environments such as industrial furnace gas combustion control systems, pipeline pressure testing, etc. Core functions: precision pressure monitoring, safety and reliability design, system compatibility.

Honeywell sensor 3090A35

Honeywell sensor 3090A35 Category: Burner accessories 3090A35 is a variable magnetoresistive (VRS) speed sensor designed for hazardous environments. It realizes contactless speed measurement through electromagnetic induction principle and is widely used in industrial automation, petrochemical and automobile fields. Type: Variable magnetoresistive (VRS), no external power supply is required, and signals are generated through electromagnetic induction. Protection level: IP65 vibration resistant. Temperature range: -73°C to +93°C, adapted to extreme industrial environments. Core functions: speed measurement mechanism, adaptability of hazardous environments, signal processing characteristics. Typical application scenarios: industrial automation, petrochemical and other fields.

Schneider shampoo actuator STE4,5 B0.36-6-01L LUFT

Schneider shampoo actuator STE4,5 B0.36-6-01L LUFT Category: Burner accessories STE4.5 B0.36-6-01L LUFT belongs to the STE series servo motor, specially designed for combustion blower damper control. This series of actuators accurately control the rotation angle through analog signals (0-10V voltage or 4-20mA current). The working range can be freely defined between 0-90°, and is equipped with an extreme switch to ensure operational safety. The servo-driven damper controller specially designed for industrial combustion systems is to optimize combustion efficiency by accurately adjusting the damper opening, while ensuring safe operation of the system. Power requirements: Standard type: 24V DC (±15%), power consumption 3.5W; Wide voltage type: 100-230V AC (50/60Hz), power consumption 5W (customized). Multi-signal compatibility: supports voltage/current dual-mode input, adapting to different control system requirements. Reliable protection: prevents over-range through mechanical limit switches, suitable for harsh environments such as gas burners. Core functions: precision adjustment mechanism, safety and reliability design, system compatibility. Typical application areas: industrial combustion systems, HVAC systems.

Schneider Limit switch XCK-J10559H29C

Schneider Limit switch XCK-J10559H29C Category: Burner accessories XCK-J10559H29C is a heavy-duty all-metal stroke limit switch produced by Schneider Electric and belongs to the XCK-J series products. Structural characteristics: It adopts a direct-moving design, and the action principle is similar to that of button switches, but it is triggered by the collision of the moving parts; it has a fully metal shell structure, which has high mechanical strength and durability. Working principle: When mechanical moving parts collide with switch buttons, the contacts realize circuit on-off control; after the moving parts leave, the spring mechanism automatically resets the contacts. ‌Application Scenarios‌: It is used to limit the mechanical movement position or stroke, and realize functions such as automatic stop, reverse motion, and variable speed movement. Suitable for places with a running speed of no less than 0.4m/min (arc burning contacts are easily generated at low speeds). It can be installed on a stationary or moving object, and the control circuit action is changed through the contact state. ‌Technical parameters‌: Available in 1 open and 1 closed contact configuration (ZCKJ1H29C model). It can be used with a variety of switch head components (such as ZCKE05C, etc.).

Weishaupt Burner Programmer W-FM25 V2.0(D-73660)

Weishaupt Burner Programmer W-FM25 V2.0(D-73660) The W-FM25 V2.0 (D-73660) is a combustion management controller developed by DUNGS, mainly used for the automatic control and safety monitoring of gas/oil burners. This controller adopts microprocessor technology and features high-precision control, safety protection, and fault diagnosis capabilities, making it suitable for industrial and commercial combustion systems. Power Supply Voltage: 230V AC, 50/60Hz Power Consumption: Approximately 12W Protection Class: IP40 Operating Temperature: -20°C to +60°C Main Functions: (1) Combustion Control Function Automatic Ignition Control: Controls ignition transformers, solenoid valves, and other actuators to achieve safe ignition. Flame Monitoring: Detects flame status through ionization electrodes or UV flame detectors to ensure combustion safety. Operation Mode Management: Supports single-stage, two-stage, or proportional combustion modes. Pre-Blowout & Post-Blowout: Ensures no residual flammable gas in the furnace before and after combustion, enhancing safety. (2) Safety Protection Function Lockout Protection: Automatically locks the burner in case of faults to prevent dangerous operation. Safety Time Control: Sets SZA (Safety Wait Time) to ensure the burner restarts under safe conditions. (3) Human-Machine Interaction & Debugging Function LCD Display: Shows operating status, fault codes, parameter settings, etc. Key Operation: Supports manual debugging, parameter adjustment, and reset operations. eBUS Communication: Supports communication with upper-level machines (such as PLCs, building automation systems) for remote monitoring. (4) Compatibility & Expandability Compatible with mainstream burner brands such as Weishaupt, Riello, and Baltur. Can be used with peripheral devices such as pressure switches, gas valve groups, and temperature controllers.